Results 1 to 10 of 15
Thread: Blade Chips
Threaded View
-
04-16-2014, 05:28 AM #7
Another issue then the above mentioned, is the hone. Is it completely flat? If there's a small bump, on the hone your edge will hit it and be destroyed. The easy way to check it, is to put some 400 grit sanding paper on a glass plate, and make some light pencil strokes on the hone.
Then lap the hone a few times with light pressure on the sanding paper and all the pencil marks should be removed. If not, lap the hone until they are gone.
-
The Following User Says Thank You to Kristian For This Useful Post:
JOB15 (04-16-2014)