Thread: Need some help with wetstone selection

It depends what are you intent to do in the future. If you think you'll buy more and more razors on Ebay, like all of us here on SRP,
I would say 350 is a very good buy. Some of us will pay that amount just for a finishing stone , trying to find Nirvana of edges. If you just want to hone couple of razors for yourself, they are way cheaper options.

Hi Guys, Thanks for all the replies! I get what you're saying in regards to price. I do think there's a lot of wisdom in what you advise to work down from an already sharpened razor. Maybe start with a 16,000 and buy more course hones as I need them. Here's my hones, the oil stones in the back are for knives and handplane blades. The white is the Arkansas, and the small stones on top are also hard stones, but I don't have a clue as to what grit they are. As you can see the razors have a way of multiplying, Yikes!

Thanks for the lead on the ebay shaptons. I'm seeing the finest is the 12,000 besides the 30,000 which is $500. Do you guys think the 12,000 would be fine enough?

It must be since a huge number of SRP members use one for finishing/smoothing their edges.

Thank you all for the advise. they didn't quite have the grits I was looking for. I settled on the Shapton 1,000, 5,000, 8,000, 12,000. This was the cheaper way to go. I am from Oregon Razorfeld, thank you!

you could upload a few picktures of the hones you don't know and maybe someone here can tell you there is like a gazillion hone identification threats on here

I don't think your white arkie is a finishing stone. It looks like either a soft or hard variety (hard can be transitional if it's got translucent qualities). These stones been natural they can be hard to grade correctly.

I think your on the right path with the shaptons. 1, 5, 8, 12 is a good rotation. It should prove to be a solid foundation to build on if you want to go more into naturals as your graded stones can be used to grade naturals.

Think of it like this.


You can hone a razor to 12K then put it on a natural. Does the edge improve? If yes then it's >12K. If not get a razor done an the 8K, Does it improve the edge? If yes then you have a stone >8K <12K, If no get a razor done on the 5K rinse and repeat.

Your razor collection is very nice.

Nice filli, And JA henckels.

If you have a look in the restoration section there are threads regarding polishing a blade out to make it look like new. I think you have a couple of blades that would look stunning if you did this. The Henckels also looks to have cracked scales. I would seriously think about having the crack stabilized so they don't crack through.

I'd agree, it doesn't appear to be hard in the sense that a translucent or black stone is - it looks a bit shy of that in density. If it's not a soft arkansas, it could still be conditioned to finish a razor, but the technique to use it won't be quite a straight forward and guaranteed as it is with a fine synthetic stone.

The small combination stone looks like it might be an india washita combination, but hard to tell with pictures far away. Keep all of those stones around, you may come back around to them later. I find that arkansas stones that are just a bit coarse can be used like a barber hone once you've got an established edge, and will provide a very nice shave, but you're not to that point with an edge yet - the initial edge can be kind of harsh with the same stone if it's worked all the way to the edge.

I personally like honing on arkansas stones more than synthetics, but have enough of them that one is always what I want. I liked synthetics more at first.

It looks to me like you have mid grit covered and you could use something to set the bevel and a finisher. Those two stones in the back look like silicon carbide combo stones, and they are generally too harsh for razors.

The Shaptons are my current favorites. I have the whole set. I find the 10k is WAY better than the 16k. (go figure) I go directly from the 10k to the 30k. Having said that, if I'm not in a hurry, (Shaptons are splash and go) I can get excellent results from my 1k,4k,8k Kings and then my Naniwa SS 12k. (Which is a much more cost effective option if you don't sharpen a lot of razors)