Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
Like Tree20Likes

Thread: Microscopic photos of different edges YG Escher, Coticule, Translucent Arkie and more

  1. #11
    Snicker Snack
    Join Date
    Jun 2009
    Location
    Boston, MA
    Posts
    311
    Thanked: 67

    Default

    I think that studies like this are useful, but are really hard to standardize properly.

    Even with the hone progression standardized, it is really difficult to get the lighting perfectly even for all the photographs. I used to have access to extremely high-quality microscopes, and even then I had issues with consistent reflected light.

    People are going to accept the data that agree with their own observations, and they'll ignore the data that don't.

    Still, as more and more data are collated from these finishers, we'll have a chance to cut through the noise for a more accurate description of the finishes from these hones. Of course, the look of the finished edge is only one factor that determines what a good shaving edge may be.
    JimmyHAD, Geezer, Tack and 1 others like this.

  2. #12
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by yohannrjm View Post
    I think that studies like this are useful, but are really hard to standardize properly.

    Even with the hone progression standardized, it is really difficult to get the lighting perfectly even for all the photographs. I used to have access to extremely high-quality microscopes, and even then I had issues with consistent reflected light.

    People are going to accept the data that agree with their own observations, and they'll ignore the data that don't.

    Still, as more and more data are collated from these finishers, we'll have a chance to cut through the noise for a more accurate description of the finishes from these hones. Of course, the look of the finished edge is only one factor that determines what a good shaving edge may be.
    The hand of the honer is also a variable to be considered.
    gssixgun, Geezer and doorsch like this.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. The Following 2 Users Say Thank You to JimmyHAD For This Useful Post:

    doorsch (04-30-2015), gssixgun (04-30-2015)

  4. #13
    Senior Member
    Join Date
    Sep 2014
    Location
    Riyadh, Saudi Arabia
    Posts
    151
    Thanked: 66

    Default

    Quote Originally Posted by DaveW View Post
    When I look at your edges, the trans ark (ignore the scratches) edge looks better than any of the other edges. I'm not surprised.

    I haven't had any trouble with edge chipping on any razors, except on synthetic stones, no matter how many passes.
    Hello Dave,

    Nice observation my friend, true the Arkie edge is the most straight edge of the above, but that might be because I honed the razor 180 laps more than the other hones.

    It's good to know that you haven't encounter any microscopic chips in your razors, for me soft steel and Japanese extreme hard steels are prone to chip microscopiclly more than mild( Sheffield) to hard(fillys, most german razors) steel. These chips can't be spotted sometimes even under 40-60 x, does these affect shaving God knows, but seeing the chip even under 1000x makes you feel that this ain't good:/

  5. #14
    Senior Member blabbermouth
    Join Date
    Jul 2011
    Posts
    2,110
    Thanked: 458

    Default

    I forgot to say, also, that if there are any foreign particles at all on a trans or black ark, chipping will occur, of course. So I wouldn't say that it's not something that can happen on an ark.

    What I've noticed with the very very hard steels is that the ark stones are a little less aggressive than sedimentary stones like jnats and they quit cutting them sooner. Whether that's because novaculite is slightly less hard than untransformed siO2, I don't know.

    Ditto on the passes, it takes a lot.
    Blistersteel likes this.

  6. #15
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    Quote Originally Posted by yohannrjm View Post

    People are going to accept the data that agree with their own observations, and they'll ignore the data that don't.

    Of course, the look of the finished edge is only one factor that determines what a good shaving edge may be.

    Yep right there is the truth of the "Look at my pretty Bevel pics"

    Pressure is such a huge factor it isn't even funny..

    If you want to really do a more convincing test of the actual Rocks then set the razors to the side..
    Get your self about 20 small squares of Hardened steel all cut from the same billet and a well set up way to take the same pic over and over..
    Set up a mechanical stroke that applies the same pressure and start testing just the Rocks, that way you are eliminating as much of the variables as possible..


    But the pretty pics of bevel scratches mean next to nutin


    Seems that is at least the twentieth time I have posted that exact same thing



    ps: It has been my experience that watching people hone to eliminate "Scratch Patterns" has them producing Harsh, Fragile edges...
    Last edited by gssixgun; 04-30-2015 at 06:11 PM.
    Wolfpack34 and doorsch like this.

  7. The Following 3 Users Say Thank You to gssixgun For This Useful Post:

    doorsch (04-30-2015), jnats (01-03-2016), Wolfpack34 (04-30-2015)

  8. #16
    Senior Member
    Join Date
    Sep 2014
    Location
    Riyadh, Saudi Arabia
    Posts
    151
    Thanked: 66

    Default

    Quote Originally Posted by yohannrjm View Post
    I think that studies like this are useful, but are really hard to standardize properly.

    Even with the hone progression standardized, it is really difficult to get the lighting perfectly even for all the photographs. I used to have access to extremely high-quality microscopes, and even then I had issues with consistent reflected light.

    People are going to accept the data that agree with their own observations, and they'll ignore the data that don't.

    Still, as more and more data are collated from these finishers, we'll have a chance to cut through the noise for a more accurate description of the finishes from these hones. Of course, the look of the finished edge is only one factor that determines what a good shaving edge may be.
    I agree with you on the difficulty of getting a controlled test especially when it comes to light reflection, but honing beside microscope help you to learn the changes that you introduce to the edge during the process of honing. Measurement of sharpness is almost impossible at least to my knowledge.

    To Dave

    The chips might occur due to grit particles on the hone, but it's consistent with the type of the razor the I use with the Arkie. I know that you don't like to slurry your Arkansas stones, but I would like you to try it with the hard steel that you mentioned it would be interesting to know if a type of steel can resist the cutting powers of slurried Arkie.

    I am planning to obtain a Japanese razor that made from tungsten steel to test it with different stones especially the Arkies.

  9. #17
    Senior Member
    Join Date
    Sep 2014
    Location
    Riyadh, Saudi Arabia
    Posts
    151
    Thanked: 66

    Default

    Quote Originally Posted by gssixgun View Post
    Seems that is at least the twentieth time I have posted that exact same thing



    ps: It has been my experience that watching people hone to eliminate "Scratch Patterns" has them producing Harsh, Fragile edges...
    I think you are allergic to microscopes Glen

    Yes, some steels degrade a lot after the frist shave especially when I hone the to the point that they become like a mirror but I never suspect that is the reason I remember checking one of the soft steel razors after shaving the edge looked like old foil when I stropped the razor the edge chipped microscopiclly, but never had this issue with the filly razor. It make sense since the more you refine the the more it become weaker.

    What I'm doing is more like learning than testing.
    Steel likes this.

  10. #18
    The First Cut is the Deepest! Magpie's Avatar
    Join Date
    Feb 2010
    Location
    Upper Middle Slobovia NY
    Posts
    2,736
    Thanked: 480

    Default

    Quote Originally Posted by kcb5150 View Post
    The only hone I have that soundly defeats it is my vosgienne, but I can't just buy another with identical properties ever so it kind of gets disqualified on those grounds. I still want to find one of the ultrafine charnleys just so I can compare, but they seem few and far between and importing hones that are usually over a foot long is too costly for unknowns...
    Next time I am in the city, I can bring a couple of CF stones for you to play around with if you care to journey to Brooklyn. My absolute finest is not that big. 6 inch maybe. but its my favorite of all even over my arks
    Euclid440 likes this.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •