Thread: A Begginer to Honing!

I'd say it depends on how much you want to invest into it.
If your rich , then a good place to start is with the full Shapton Glass range / holder & pond.
If your poor buy the Norton 4/8k combo stone and work with that

Bananby, here is your first tip: The best price around is right at the top of this page in Straight Razor Designs DMT 325 diamond stone lapping tool, which you need to keep you stones flat, or use 3-400 wet or dry.

An simple Idea, : Maybe some Gent's would like to sell off their new guy stones after they have moved on to greener pastures and stones, Maybe a newby section in the classifieds to put all things newguy? When I pass on I would like my stones to go to those interested in sharpening steel.

Originally Posted by FAL

Bananby, here is your first tip: The best price around is right at the top of this page in Straight Razor Designs DMT 325 diamond stone lapping tool, which you need to keep you stones flat, or use 3-400 wet or dry.

An simple Idea, : Maybe some Gent's would like to sell off their new guy stones after they have moved on to greener pastures and stones, Maybe a newby section in the classifieds to put all things newguy? When I pass on I would like my stones to go to those interested in sharpening steel.

I don't think a special section is really necessary, with a little bit of reading here you can get an idea of what is good and what is bad, besides some guys will go straight to expensive hones and stop there and others will do the same with more budget friendly items. You get used to what you have and as long as it falls into the spectrum of hones suitable for razors then it will be acceptable.

For fear of sounding like an unhelpful curmudgeon I would strongly advise reading through both the library and the hones/honing sub fora. This will help you to get an Idea of what you would like then ask some slightly less general questions, besides once you get more than about half a dozen responses you will have at least 4 different answers to your questions.

I purchased a chosera 1K, and naniwa super stones in 3,8,10 and 12k and an Atoma 400 grit lapping plate, to date I have only really got use out of the 8k+ stones and lapping plate.

In my opinion buy a decent 12k hone and lapping plate (or use wet and dry) and just maintain the edge you have, when the 12k stops cutting it buy a coarser hone.

Originally Posted by edhewitt

In my opinion buy a decent 12k hone and lapping plate (or use wet and dry) and just maintain the edge you have, when the 12k stops cutting it buy a coarser hone.

Yup!!!!!!!

I started honing the 1st day I started straight razor shaving lol I was freehand sharpening knives and was really getting into it so I started looking up other things to sharpen, that's how I fell into straight razors. One mistake I made was purchasing cheap stones my first run and spent about $179 for a set called taidea, 1k 3k&5k two sided 8k the stones were eaten alive from sharpening... Dishing out then when I would lap them they were practically nothing by the first month lol... I then purchased the shapton kuromaku series which was actually not much more expensive and I had a more complete set 320 1k 2k 5k 8k 15k which came to a total of $250 dollars... I have now been using these stones for the last month and you can't even tell they have been used aside from the writing being lapped off... i purchased all my stones from Amazon as a have a credit card I opened with them and have 12 month financing on everything so this new hobby wouldn't hurt much... You'll also need something to Lapp the stones with I oringinally purchased a Norton flattening stone which was okay but I recently purchased an Atoma 400 and it is a much better lapper... Like anything else that takes hand and eye coordination there is a learning curve and not to toot my own horn but I caught on pretty quick in terms of my technique on honing... I would recommend watching a TON Of YouTube videos on honing which is where i learned almost everything along with a micro-meet which was very informative so if you can find one in your area I would suggest going... Hope this helps

Fonz

“Check out the Nick Shaves videos....he has a couple with Howard Schecter of The Perfect Edge, discussing SR honing...”

Yea, that is an… interesting video, but not the video for a novice to base their honing technique on. It may work for him, but is a very aggressive technique and good way to grind away a lot of your razor.

Do begin with a light touch up with a quality synthetic 12K stone, do not buy ebay natural stones, it will just extend your learning curve.

Learning to shave and strop is where you should concentrate your learning, not saying you can’t do both, but more than one new honer, shaver have just, given up, it can be overwhelming.

Honing is not quite as easy as the pro's make it look. If all is well with the razor spine and edge, then yes it will hone quickly. If there is any warp or chips to deal with, things get challenging...

Did anyone mention a Swaty for a beginning hone?

+1 for the Naniwa 12k, it is a great stone for touching up an edge.

I would strongly suggest you get a SRD modular strop. If you try a conventional strop you could dull the edge real fast on your razor. I use the modular and it has interchangeable pads that fit on a wood base so there is very little chance of dulling the razor and it does a great job. Second, I would invest in a Shapton 12 k stone for refreshing then stropping. If you need the bevel set, send it out to one of the excellent members to set the edge and hone. You can pick up cheap razors on eBay to practice honing and stropping on. Once you feel comfortable, then you can invest in an 8k stone. I find the Shaptons are very easy to maintain and give a very good edge if used correctly.