Thread: Honing sequence for refreshing (beginner)

Since the title of the thread says for refreshing. I'm assuming you have a shave ready razor or plan on acquiring one. A 12k is ample for refreshing a razor and a lot of guys do that. A simple refresh doesn't require dropping to 8k or 6k. The razor needs to be shave ready though when you get it.

Yeah my straights already shave ready. So after watching lynn's video on refresh techniques, I have a better idea on what I should do. Was just wondering what other ppl do. My plan is about 8 passes and then go to the strop.

Depending on the hone, 8 might not be enough, test after 8 and assess the edge

Originally Posted by Dramadon3151

Yeah my straights already shave ready. So after watching lynn's video on refresh techniques, I have a better idea on what I should do. Was just wondering what other ppl do. My plan is about 8 passes and then go to the strop.

Tape the spine, there is no point in needlessly grinding your spine while learning to hone.

Don’t get caught up in the formula trap, x laps for x problems, buy some good magnification, look at the edge, before you put the razor to the stone… then do what the razor needs. If the razor has a large chip, 8 laps will not remove it. If it has a chip, it is not a refresh honing, it is a repair, then it can be honed. Do some reading on how to hone as John suggested.

For not much more that the price of a GD you can buy a beater, and once you learn to hone, restore the beater and end up with a nice razor.

Honing a Gold Dollar will teach you how to repair a GD, not much about honing though. Yes, it has been done and is doable… but why.

If cost is your issue, quality is not that much more expensive and often cheaper in the long run.

Bottom line, if you want to learn to hone, learn on razors you will be honing, if you want to repair GDs, go for it. Yes you can rescale and customize a GD, but in the end you still have a Gold Dollar…