Page 1 of 2 12 LastLast
Results 1 to 10 of 25
Like Tree5Likes

Thread: Hone ID

Hybrid View

  1. #1
    Senior Member Oustoura's Avatar
    Join Date
    Apr 2015
    Location
    paris
    Posts
    449
    Thanked: 13

    Default

    Quote Originally Posted by doorsch View Post
    Seen your test on 3C...as said they can reach some finer values...

    Did you try with slurry and water ? Try water/glycerine solution to get a bit finer results...

    Actually shaving with those is a bit too harsh for my personal feeling....

    i always use water on my hones, tried once with oil but it was awfull to clean after finished to hone. water/glycerine; sounds good but need to have glycerine.

    by the way, do you have any suggestion for a finishing hone ? i've already a DT and purple lynn, i'm satisfated but as i look for a la lune and still not found one, i seek an other hone for a step after purple.

  2. #2
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    Smith’s honing solution, (water soluble) works well and washes off easily, as does mineral oil with a degreaser (simple green) or Dawn dish soap. Sometimes a short soak is needed for oil.

  3. #3
    Senior Member doorsch's Avatar
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    1,300
    Thanked: 539

    Default

    Quote Originally Posted by Oustoura View Post
    i always use water on my hones, tried once with oil but it was awfull to clean after finished to hone. water/glycerine; sounds good but need to have glycerine.

    by the way, do you have any suggestion for a finishing hone ? i've already a DT and purple lynn, i'm satisfated but as i look for a la lune and still not found one, i seek an other hone for a step after purple.
    There are really many around, the ones i really like actually would be (with no specific ranking):

    - Vermio Genuine Greek Razor Hone
    - Charnley Forest (some actual good offers on auction sites)
    - Apache Strata USA
    - Colorado Slate (Sedimentry Stone) from Gabriel
    - A Jnat set with Naguras and f.ex. a Ozuku, Nakayama Kiita, Shouboudani or Wakasa
    - La Lune or Special Stone

    all stones where i like the finish i get from those...
    ███▓▒░░.RAZORLOVESTONES.░░▒▓███

  4. #4
    Senior Member Oustoura's Avatar
    Join Date
    Apr 2015
    Location
    paris
    Posts
    449
    Thanked: 13

    Default

    Quote Originally Posted by doorsch View Post
    There are really many around, the ones i really like actually would be (with no specific ranking):

    - Vermio Genuine Greek Razor Hone
    - Charnley Forest (some actual good offers on auction sites)
    - Apache Strata USA
    - Colorado Slate (Sedimentry Stone) from Gabriel
    - A Jnat set with Naguras and f.ex. a Ozuku, Nakayama Kiita, Shouboudani or Wakasa
    - La Lune or Special Stone

    all stones where i like the finish i get from those...
    Thanks for these. Actually the most attractive prices are for charnley forest at this time. Bit I'll wait some more to see if there will be some better offers. So for a while I'll go on with purple Lynn finishing and strop.

  5. #5
    Senior Member Iceni's Avatar
    Join Date
    Oct 2013
    Location
    Coventry
    Posts
    710
    Thanked: 221

    Default

    The Vermio is a decent price as well.

    http://www.erhaso.com/epages/Shop470...iefer195x70x20[1]

    CF is always a little gamble, I've been in the quarry and had my hands on uncut stone. And there is a lot of variation of rock in a small area. Some is superfine others are slightly more coarse typical of all natural stone. If you can make sure the auction for CF has great pictures so you can gauge the surface. CF is also very common on Ebay.co.uk most of the time you will see 3-4 listed guaranteed rocks for a big price, then 3-4 stones that you can make an educated guess about.

    UK stone terminology is strange. Unless you know what a hone is the common term would be "sharpening stone", "whetstone", "wet stone", or "oil stone". A private lister may not know to use the term hone as it is not a commonly used word in every day language. So search using many different descriptions. Also unless you know it's a CF a lister will probably list it as vintage, old, rare, or antique without specifying a stone type. If you want the bargains learn what they look like and take a cheap gamble 8inch stones are not uncommon, nor are stones with rough sides and uncut bottoms.
    Real name, Blake

  6. #6
    Senior Member Oustoura's Avatar
    Join Date
    Apr 2015
    Location
    paris
    Posts
    449
    Thanked: 13

    Default

    Quote Originally Posted by Iceni View Post
    The Vermio is a decent price as well.

    http://www.erhaso.com/epages/Shop470...iefer195x70x20[1]

    CF is always a little gamble, I've been in the quarry and had my hands on uncut stone. And there is a lot of variation of rock in a small area. Some is superfine others are slightly more coarse typical of all natural stone. If you can make sure the auction for CF has great pictures so you can gauge the surface. CF is also very common on Ebay.co.uk most of the time you will see 3-4 listed guaranteed rocks for a big price, then 3-4 stones that you can make an educated guess about.

    UK stone terminology is strange. Unless you know what a hone is the common term would be "sharpening stone", "whetstone", "wet stone", or "oil stone". A private lister may not know to use the term hone as it is not a commonly used word in every day language. So search using many different descriptions. Also unless you know it's a CF a lister will probably list it as vintage, old, rare, or antique without specifying a stone type. If you want the bargains learn what they look like and take a cheap gamble 8inch stones are not uncommon, nor are stones with rough sides and uncut bottoms.
    The link you wrote doesn't work for me I receive this message "The page requested is not available
    ""

  7. #7
    Senior Member Iceni's Avatar
    Join Date
    Oct 2013
    Location
    Coventry
    Posts
    710
    Thanked: 221

    Default

    Try this one.

    http://www.erhaso.com/epages/Shop47043.sf/en_GB/?ObjectPath=/Shops/Shop47043/Products/VermioSchiefer195x70x20[1]

    The site isn't the best

    It can be found on this page at the bottom as well.

    Abziehsteine - Banksteine - ERHASO WEBSHOP

    failing that

    ERHASO WEBSHOP - BÜRSTEN, ENTGRATEN, SCHLEIFEN, STRUKTURIEREN, MATTIEREN+SATINIEREN, POLIEREN, SCHÄRFEN+ABZIEHEN, ADAPTIEREN, ABDICHTEN

    Abziehsteine-Banksteine on the left and it should be at the bottom of the page for €39.90 before tax and shipping.
    Real name, Blake

  8. #8
    Senior Member Oustoura's Avatar
    Join Date
    Apr 2015
    Location
    paris
    Posts
    449
    Thanked: 13

    Default

    Tje higher grit I saw is 8000 which I have one for this one. I look for above the 12000. The site is in German so I will take a better look tomorrow

  9. #9
    Senior Member
    Join Date
    Sep 2013
    Location
    NW Indiana
    Posts
    1,060
    Thanked: 246

    Default

    Quote Originally Posted by doorsch View Post
    There are really many around, the ones i really like actually would be (with no specific ranking):

    - Vermio Genuine Greek Razor Hone
    - Charnley Forest (some actual good offers on auction sites)
    - Apache Strata USA
    - Colorado Slate (Sedimentry Stone) from Gabriel
    - A Jnat set with Naguras and f.ex. a Ozuku, Nakayama Kiita, Shouboudani or Wakasa
    - La Lune or Special Stone

    all stones where i like the finish i get from those...
    What the... Sebastian asked about finishers and doesn't mention Thuringian stones?! Lol, the world has turned upside down!
    doorsch and Iceni like this.

  10. #10
    Senior Member doorsch's Avatar
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    1,300
    Thanked: 539

    Default

    Quote Originally Posted by eKretz View Post
    What the... Sebastian asked about finishers and doesn't mention Thuringian stones?! Lol, the world has turned upside down!
    Upss seems i missed something important...so well...yes thuringian Stones must be on the List ;-) thanks Eric for the reminder!
    eKretz likes this.
    ███▓▒░░.RAZORLOVESTONES.░░▒▓███

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •