Results 1 to 10 of 13
Thread: Honing on a postage stamp?
-
03-24-2017, 06:27 AM #1
- Join Date
- Sep 2015
- Posts
- 695
Thanked: 77Honing on a postage stamp?
I have this very small Belgian cuticle (about the size of a large postage stamp) that I was hoping to hone on. I've already tried once with no luck now I'm hoping for advice! Any help would be much appreciated!
Sent from my SAMSUNG-SM-G935A using Tapatalk
-
03-24-2017, 07:32 AM #2
Maybe try taking the hone to the razor instead of taking the razor to the hone..
Sorry , stupid idea
I don't see why you can't do it..keeping a slurry would be a challenge though.
You would have to slide the whole edge across the stone before reaching the bottom. Going north to south and visa versa.or circles you could get away with..
I'm spitballing hereLast edited by JOB15; 03-24-2017 at 08:02 AM.
-
-
03-24-2017, 11:48 AM #3
That's a slurry stone, not a hone.
"Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." -H. L. Mencken
-
03-24-2017, 11:54 AM #4
- Join Date
- Sep 2015
- Posts
- 695
Thanked: 77
-
03-24-2017, 12:05 PM #5
-
The Following User Says Thank You to sqzbxr For This Useful Post:
aaron1234 (03-24-2017)
-
03-24-2017, 12:08 PM #6
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,552
- Blog Entries
- 1
Thanked: 3795It can be done with nearly lateral x-strokes.
-
The Following User Says Thank You to Utopian For This Useful Post:
aaron1234 (03-24-2017)
-
03-24-2017, 12:47 PM #7
- Join Date
- Nov 2016
- Location
- Chicago Suburbs
- Posts
- 1,100
Thanked: 292If you are determined to make it work, I have no doubt that you will make it work.
Personally, I like full size rectangular stones. I would like to try some of the traditional hones (Coticule, Escher, JNATs, etc.), but full size hones are either unavailable or quite expensive, more than I am inclined to pay. Thus, if I want to try these stones, I am going to have to learn how to hone on smaller stones, although perhaps not quite this small.
I am glad you glued the tiny Coticule to a paddle as you might end up with several more Band Aids on your fingers if you tried honing without the paddle.
Good luck and let us know how this turns out.
-
03-24-2017, 04:36 PM #8
Thanks for sharing and sure you can do it. You can do it ALL, DAY, LONG!
Just do like Utopian said.
Have fun, don’t hurt yourself. Mike
-
03-24-2017, 04:45 PM #9
Excellent title for a thread! I have successfully honed a razor on a coticule slurry stone measuring approximately 1-3/8" x 2-1/2" (no slurry used). And it's done exactly as Utopian and Modine said: lateral X-strokes.
Striving to be brief, I become obscure. --Horace
-
03-25-2017, 03:43 AM #10
it would help if you use a smaller razor, like a 4/8 or 9/16. Then instead of squaring up to it like how it sets in the paddle picture, I would turn it 45 degrees into a diamond position to get every fraction of an inch of travel on the stroke as you can. Finally, this is more of a style preference, but i'd definitely keep both hands on the razor to help guide it on that tiny real estate.
*edit - also, use a rolling x-stroke since it has a smaller point of contact from razor to stone.Last edited by TwistedOak; 03-25-2017 at 03:46 AM.