Results 1 to 10 of 22
Hybrid View
-
01-26-2010, 02:06 AM #1Be careful how you treat people on your way up, you may meet them again on your way back down.
-
01-26-2010, 04:48 AM #2
- Join Date
- Jan 2010
- Posts
- 15
Thanked: 1Thanks for all the input. This puts my mind at ease about having to go out and purchase another stone right away. I can work with what I have, knowing it will take care of me.
-
The Following User Says Thank You to leot For This Useful Post:
niftyshaving (01-27-2010)
-
01-26-2010, 05:23 AM #3
good post and comments it helped me with my question as well.. thanks all
-
01-26-2010, 12:06 PM #4
If you want to get a little something to put some 'icing on the cake' at low cost chrom-ox on a piece of balsa, leather, canvas or felt is effective and cheap. ChrisL sells it in the classifieds here as a public service rather than a for profit venture.
You can pick up a piece of aircraft balsa at a hobby store for under $2.00 for a 36"x3"x1/8" piece. Glue that to a flat surface , I used Plexiglas, and you've got a finisher and touch up hone for under $10.00.Be careful how you treat people on your way up, you may meet them again on your way back down.
-
01-26-2010, 11:59 PM #5
Yes, Dylan took the words right out of my mouth.
I think too many guys start buying all kinds of finishing hones thinking they will compensate for poor skills. Use the 8K and keep at it until you have extracted every bit of functionality out of that stone. Then you can move on or maybe you may be happy with that alone and wind up saving yourself alot of money.No matter how many men you kill you can't kill your successor-Emperor Nero
-
01-27-2010, 04:26 PM #6
- Join Date
- Jun 2009
- Location
- Sunny California!
- Posts
- 466
Thanked: 125You are exactly right! When I was a nooby honer, I thought I just HAD to have a nice, expensive finishing hone, having the delusion that it would make my razors shave better. Didn't happen!
I learned what Dylan said, the hard way. You have to have an excellent edge by the time you reach the 8K stage of honing, otherwise you are just wasting your time and money with finishing hones. I think that should be put in the wiki...
-
01-27-2010, 04:49 PM #7
You can get perfect shavs off a norton 8K. The 4K/8K (or equivalent) is all you need to start with if your razor has halfway decent bevels.
Also: if you can't get a decent shave off an 8K razor, then any money you spend on an expensive finishing hone is just a waste of money and stone.
In a similar vein, I say that pasted strops are a crutch if you are trying to learn to hone using stones.Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
To spit in Sightblinder’s eye on the Last Day
-
01-27-2010, 04:59 PM #8
- Join Date
- May 2005
- Location
- St. Louis, Missouri, United States
- Posts
- 8,454
- Blog Entries
- 2
Thanked: 4942When I started the first straight razor forum going on 10 years ago, there was virtually no information available like today with regard to almost any aspect of straight razor shaving. As one of the first people around to promote this sport, I was taught to hone by using the pyramid method with the Norton 4K/8K and for straight razors, that is what was known and available at the time. I used this stone for everything from repairs, to bevel setting to finishing for over 2 years and remembering back, the shaves were always very nice. The quest for the "Perfect" edge and most spectacular shave possible eventually drove me to the Coticule, Escher, Japanese Naturals, Synthetics up to 30K and the paste/spray media. The fundamentals developed with the 4K/8K, I feel, really helped in the progression with the circles that I later developed. The nice thing about the 8K is that if you are close, you can go back and dial in a razor using 3 to 5 strokes for a couple trips until it gets there.
There is much more information available today and a bunch more nice stones out there. Like with shaving, once you take the time to develop your technique with the basics, you will enjoy the results, not only quicker, but better.
The main tips that I can give you is to not obsess over one razor. Always assume the problem is you and not the razor. Be willing to take a step back and work on the razor tomorrow instead of investing hours on any given razor in a given day, thus really removing more metal than necessary. Less strokes are better (usually). Call one of us who have been doing this a while and ask for recommendations or help on problems. And most importantly, Have fun!
Lynn
-
The Following 3 Users Say Thank You to Lynn For This Useful Post:
JimmyHAD (01-27-2010), leot (01-27-2010), welshwizard (01-31-2010)
-
01-27-2010, 06:23 PM #9
- Join Date
- Apr 2007
- Location
- St. Paul, MN, USA
- Posts
- 2,401
Thanked: 335Shucks. Here I was hoping to get myself appointed Deacon for a Small Fee and ushering hopefuls to the Altar of Grit in the House of Hone.
Looks like I need a new scheme.