Page 1 of 2 12 LastLast
Results 1 to 10 of 22

Hybrid View

  1. #1
    Member amber62509's Avatar
    Join Date
    Mar 2010
    Location
    Suwanee, Ga.
    Posts
    45
    Thanked: 5

    Question I am in the candy store of hones

    I want to swim in the deep end with the big boys by that I mean I want to hone. I have had several people tell me don't do it at all or have someone else do. I love straight razing (love at first sight) I love my straight razors I want know and learn everything with straight razing. I know I know there is a thread about this but I have searched and could not find it. Thank you for taking the time to help me out.

    I have done my homework with honing but now I am at stopping point because I not sure which one to buy. I know that choosing a hone means what do you want to do. Well I want to take my dull blades and make them ready to strop and shave. From what I know and read the best to start is the Norton 4k/8k. However, durning my search I found "Belgian Blue Whetstone" and the "Chinese 12k grit waterstone." Which I don't think I need the "Chinese 12k grit waterstone" though I may be wrong not sure. The "Belgian Blue Whetstone" I am seeing and reading all the razzle dazzle but I am not reading the meat so what is the meat? Oh I keep reading barber hone and quite frankly I am lost on those. Do I need a barber hone instead of a Norton?
    Also if anyone knows a great deal on a Norton I would appreciate it. I am a college student and the Nortons I have seen have cost the same as my books! Once again thank you thank you for your time and for answering this probably for the millionth time.

  2. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11044

    Default

    I know the feeling. That was my attitude and I started right at it too. IMO for bang for the buck you best bet is the Norton Waterstone Starter Kit here. If you google in under shopping you may find it cheaper. With this you can get a razor from dull as a butter knife to shave ready. Start with that and once you get proficient with it you can look at a higher grit finisher but the norton set is all that you really need.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. The Following 3 Users Say Thank You to JimmyHAD For This Useful Post:

    amber62509 (05-19-2010), Disburden (05-16-2010), Silver2 (05-21-2010)

  4. #3
    Carbon-steel-aholic DwarvenChef's Avatar
    Join Date
    Mar 2007
    Location
    Santa Barbara, CA
    Posts
    2,814
    Thanked: 823

    Default

    +1 As Jimmy stated

    You are progressing nicely Now beware of the otherside of this... HAD lurks there

  5. The Following User Says Thank You to DwarvenChef For This Useful Post:

    amber62509 (05-19-2010)

  6. #4
    They call me Mr Bear. Stubear's Avatar
    Join Date
    Jul 2009
    Location
    Alton, UK
    Posts
    5,715
    Thanked: 1683
    Blog Entries
    3

    Default

    +1 on that Norton kit, its really good value and gives you all the tools you need. You could add a C12k to it if you wanted to, but its not a must have.

  7. The Following User Says Thank You to Stubear For This Useful Post:

    amber62509 (05-19-2010)

  8. #5
    . Otto's Avatar
    Join Date
    Sep 2008
    Posts
    3,757
    Thanked: 3708

    Default

    I agree with Jimmy. Learn to use the 4k / 8k Norton. When you consistently get a good shave from the 8k, you can start to think about higher grits.


    "Cheap Tools Is Misplaced Economy. Always buy the best and highest grade of razors, hones and strops. Then you are prepared to do the best work."
    - Napoleon LeBlanc, 1895

  9. The Following User Says Thank You to Otto For This Useful Post:

    amber62509 (05-19-2010)

  10. #6
    Robert Williams Custom Razors PapaBull's Avatar
    Join Date
    May 2005
    Location
    East Liverpool, Ohio
    Posts
    971
    Thanked: 324

    Default

    I don't care what anyone says, it's simply not possible to have too many hones. Hones are to me what young ladies are to Tiger Woods. I've exercised great restraint for a little while, but every time I see a new hone I don't have...... ooooohhhhhh man, my heart starts beating a little faster and I start feeling like I'm short of breath; gasping for air. Frantic.... must.... must ..... not.... no, MUST have it.

    Coticules and Thuringens and Chinese Waterstones and Japanese waterstones, and ceramic hones and shaptons and diamond hones and ruby hones and barber's hones and glass hones and wet hones and dry hones and flattening stones and slurry stones and crystalon hones and....... varieties within each. When your biggest problem is deciding which of your precious hones you're going to take out to play and when storage starts to be a real issue for you, you'll know you've followed me down the path of H.A.D.

    And the damnedest thing is that you can really get by with 2 or 3 different hones and do everything you really need to do.

  11. The Following 7 Users Say Thank You to PapaBull For This Useful Post:

    amber62509 (05-19-2010), DwarvenChef (05-14-2010), FatboySlim (05-15-2010), HNSB (06-02-2010), matt321 (05-16-2010), mrbhagwan (05-24-2010), nun2sharp (05-15-2010)

  12. #7
    Member amber62509's Avatar
    Join Date
    Mar 2010
    Location
    Suwanee, Ga.
    Posts
    45
    Thanked: 5

    Default

    THANKS EVERYBODY! Good to know I did my homework right. The only part I left out was getting the 220/1000 grit stone. Now what the heck is HAD? Well I am extremely excited and can not wait to get started. I did fined one site grand total 114 no shipping and handling fee but it wasn't a kit more like separate pieces.

  13. #8
    I Bleed Slurry Disburden's Avatar
    Join Date
    Feb 2009
    Location
    Carmel, NY
    Posts
    2,458
    Thanked: 545

    Default

    HAD goes hand and hand with the other ADs such as RAD and you will know what it means when you have more than four stones and you want more. You may even force yourself to spend 500.00 on one hone!

  14. #9
    Member amber62509's Avatar
    Join Date
    Mar 2010
    Location
    Suwanee, Ga.
    Posts
    45
    Thanked: 5

    Default Big Thanks

    A big thanks to everybody. As a quick update I went ahead and bought it along with some mb but I believe I will return the mb soap. I am so excited and it should be here tomorrow or wed. I haven't been able to sleep much with all the excitement and all. So thanks again.

  15. #10
    Senior Member Brando's Avatar
    Join Date
    Jan 2010
    Location
    Suburb of Chicago
    Posts
    637
    Thanked: 184

    Default

    Quote Originally Posted by JimmyHAD View Post
    I know the feeling. That was my attitude and I started right at it too. IMO for bang for the buck you best bet is the Norton Waterstone Starter Kit here. If you google in under shopping you may find it cheaper. With this you can get a razor from dull as a butter knife to shave ready. Start with that and once you get proficient with it you can look at a higher grit finisher but the norton set is all that you really need.
    I agree 100% with Jimmy!!!
    I myself toiled on wich set of hones to get for my 1st set. And I went with the popular oppinion, the Norton Waterstone 220/1000 4000/8000 combination set. They work excellent and I couldnt be more pleased

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •