Results 1 to 10 of 16
-
06-25-2010, 08:17 PM #1
Is this a Charnley Forest and how to lap it?
Hi everyone,
I'm trying to figure out whether this old sharpening stone that I have is a Charnley Forest or not. Its about 1 1/2 by 6 inches, aside from the scratches it has, its otherwise really smooth feeling and seems like a pretty hard stone. Its mostly light gray-green in color but it has a generous amount of red-brown swirls in it too. What do you experts think? Is this a Charnley? I'm going to lap it on a flat granite surface with 600/1000/2000 grit sandpaper and then test it out. But I have a feeling thats going to take a while and in the meanwhile, I would appreciate if anyone has some feedback about this stone.
Thanks in advance
Pete
-
06-25-2010, 08:30 PM #2
Looks like it is a CF. I've used my 325 diamond plate and never anything finer. If I was lapping it I would use 325 paper or the 600 if that was the coarsest I had. I see no reason to go finer but YMMV.
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
The Following User Says Thank You to JimmyHAD For This Useful Post:
RazorPete (06-25-2010)
-
06-25-2010, 08:36 PM #3
Looks like it could very well be, please post more pics after the lapping!
It is easier to fool people than to convince them they have been fooled. Twain
-
The Following User Says Thank You to nun2sharp For This Useful Post:
RazorPete (06-25-2010)
-
06-25-2010, 09:06 PM #4
thanks for the feedback! This inspires me to get lapping (with the coarser grit). I'll post pics afterwards
-
06-25-2010, 09:53 PM #5
That stone looks familiar. I had it in my watchlist. If it really is a Charnley you will need 120-220 grit waterproof sanding paper or better yet a coarse diamond hone. I started with 120 grit sanding paper on mine but after a few days I realized it was taking too long. Instead I used a $3 diamond hone with semi-flexible backing on a glass plate and finished it with 240 to 2000 sanding paper.
-
06-25-2010, 10:15 PM #6
very hard to call. it will need lapping then may be we can say .or have better idea.let us know when you done lapping. i don't think you need more then 1k in any hone while you lap it.
-
06-26-2010, 01:44 AM #7
For my part, I think it's a Charnley. I'm not an expert, but I do like mine.
As far as lapping, a real Charnley Forest can take a joke. It is a very hard and dense stone, so be prepared for a lot of effort. But I feel they are worth the effort, one of the top finishing stones I've ever used to take a sharp razor to a very sharp razor. That's all its good for, but it's very good at that.Last edited by FatboySlim; 06-26-2010 at 01:47 AM.
-
06-26-2010, 07:55 AM #8
- Join Date
- Mar 2009
- Posts
- 1,211
Thanked: 202For size I would say not CF (quite small). For the colour it is hard to say lap it first and then show the pics. To help with that. Normally with chipped and dished CFs I start on grit 60-80 dry (often dusting it out with a brush). Once it is flat I go higher grit with water. It is dense stone it does take long time to lap it but a beauty can be revealed. Good luck.
-
06-26-2010, 02:07 PM #9
I've never seen a charnley..in the grit, so to speak, however from various pictures of them I have witnessed amongst many posts here I would identify it as a Charnley Forest. Stubear did a review on one recently.
Lap that hone up and get the pics on here.
I would be interested to hear the opinion of anyone who has used both a Charnely and a genuine Escher, and how they compare.
-
06-26-2010, 02:18 PM #10
Thanks everybody for your input. On Jimmie's advice I got a 325 grit DMT plate and still it took quite a while to properly lap it, especially getting the one major chip out. I finished with some 2000 grit sandpaper on a flat granite countertop, and now its really smooth feeling. Anyway, here's some photos: