Results 1 to 10 of 13

Thread: do i need a 1k?

Hybrid View

  1. #1
    Senior Member Noisykids's Avatar
    Join Date
    Aug 2010
    Location
    bucolic south central mass
    Posts
    245
    Thanked: 35

    Default

    don't tell me that. i'll head right to the library to get a book on how to make one and save a few bucks. when My Favorite Martian was on tv in the 60's Ray Walton made a laser with a slide projector. My parents were in the other room and my father said to my mother, wait, listen... and sure enough, I said, let's make one! there was a place in my town that made ruby rods and a buddy and i went to scope one out, but it was 800 1965 dollars, so that project never got off the ground. now you can buy laser pointers at hardware stores for 2 bucks. i have a trend of getting wacky ideas and following through to a point, and then losing interest. Hence the telescope where I could see the splashes on Jupiter from the comet which nows sits in a corner, and the 5-ton brick oven which gets fired once a year for pizza. that's why i can't go crazy with razors and hones. adult ADD and all that. got to keep a lid on some things. time will tell

  2. #2
    Senior Member Noisykids's Avatar
    Join Date
    Aug 2010
    Location
    bucolic south central mass
    Posts
    245
    Thanked: 35

    Default

    the stone were just delivered and i lapped the combo on 220 grit wet/dry on a piece of plate glass. also chamfered all the edges. there was a small chip on the 4k side. the 12k was minute chips on the vertical edges, so i chamfered them too. the combo is soaking right now. should i soak the 12k? maybe later i'll get to try and shave. got everything i need. razors, (pending a sharpening), soap, strop, band-aids. good to go.

  3. #3
    Senior Member jeffegg2's Avatar
    Join Date
    Jul 2010
    Location
    Michigan
    Posts
    735
    Thanked: 104

    Cool

    Quote Originally Posted by Noisykids View Post
    the stone were just delivered and i lapped the combo on 220 grit wet/dry on a piece of plate glass. also chamfered all the edges. there was a small chip on the 4k side. the 12k was minute chips on the vertical edges, so i chamfered them too. the combo is soaking right now. should i soak the 12k? maybe later i'll get to try and shave. got everything i need. razors, (pending a sharpening), soap, strop, band-aids. good to go.
    There are some important unknowns here. Do you have a "Shave ready" razor to compare your work to? If you have no experience with straight razor shaving, then all your attempts will be for naught. You will never know when it is shave ready which is the final honing test if you don't know what it is suppose to shave like.

    .

  4. #4
    Senior Member Noisykids's Avatar
    Join Date
    Aug 2010
    Location
    bucolic south central mass
    Posts
    245
    Thanked: 35

    Default

    no, i don't have a shave ready to compare it to. i figure if i can shave with it, it's ready. and all i have to say about that after the last hour's activity...you can call me Sweeney.
    there's too much going on around the house today to try and hone a razor in a reflective and contemplative fashion the activity obviously deserves. we had new furniture delivered, everything is out of place, i'm going from one thing to the next, and i need to not charge ahead with this. oops, too late, i already did, and it didn't work. it'll come. No one ever taught me how to make the telescope mirror, or sourdough bread, and at my my job, i was known as The Bread God.

    edited to add: you're absolutely right. while i still have the packaging from my last $8.50 ebay find right here, i should package up the Red Point 917 and ship it off.
    I read a book about archetypes recently and was a little distraught to find that none of mine were included. we all have them, but you have to do a little introspection to get beyond what was in the section where you were supposed to pick yourself out. There was no entry for the Smart-Ass or the Know-It-All.
    Last edited by Noisykids; 09-23-2010 at 08:53 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •