Results 1 to 10 of 24

Hybrid View

  1. #1
    Junior Member gencer's Avatar
    Join Date
    Jun 2010
    Posts
    19
    Thanked: 4

    Default Which Grit Level ?

    Hi All,

    Unfortunately my razor is now dull and i've resorted to using a Gillette temporarily . It cuts leg hair quite nicely but its a little too rough for the face. I have a Naniwa 12k hone on which i attempted to bring the blade back with, but all i managed to achieved was getting the edge nice and shiny.

    I've been reading a lot and at the same have been getting confused a lot as well. I've come to the conclusion that i probably need a 1k and either an 5k or 8k to complement my 12k. I'm looking at the Naniwas again as these are quicker to get hold of.

    Could someone tell me if i'm on the right track with my thinking or not please.

    Thanks.

  2. #2
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    you should be able to get by just fine with 1k and 5k.
    If you decide to get those grits, fist start with the 5k, then 12k and see if there is an improvement, if not go back to 1k and work up the grits.
    Stefan

  3. #3
    Still learning markevens's Avatar
    Join Date
    Jun 2010
    Posts
    1,043
    Thanked: 240

    Default

    The norton 4k/8k combo would probably suit you just fine. I would think that unless you severely damaged your razor, you wouldn't need a 1k (unless you wanted to restore of course.)
    Last edited by markevens; 01-03-2011 at 09:57 PM.

  4. #4
    zib
    zib is offline
    Hell Razor zib's Avatar
    Join Date
    Nov 2008
    Location
    Jacksonville, Fl.
    Posts
    5,348
    Thanked: 1217
    Blog Entries
    4

    Default

    I have lot's of hones, but my go to hones are the Naniwa SS's. Actually, a 1, 5, and 8 will do nicely. 1k for bevel setting, then the 5k, 8k, and finish with the 12k. That's a good setup. Setting a proper bevel is key. PM me if I can be of any help...

    The Norton 4/8 is good as well.

    Rich
    Last edited by zib; 01-03-2011 at 09:36 PM. Reason: add norton's
    We have assumed control !

  5. #5
    Junior Member gencer's Avatar
    Join Date
    Jun 2010
    Posts
    19
    Thanked: 4

    Default

    Thanks for advice guys. I probably don't need the 1k, but seeing as i'm getting one hone i might as well get the 1k as well.

    Is there much difference between the 5k and 8k then ? Is it ok to go from the 5k to the 12k, or is the 8k needed for bit more fine tuning before hitting the 12k ?

  6. #6
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,552
    Thanked: 3795
    Blog Entries
    1

    Default

    Wait, stop, hold on, halt, pause, and reconsider.

    From what you wrote, you at least imply that the blade WAS sharp and shaved well but now no longer is/does. Is that correct?

    What kind of razor is it?

    Have you ever successfully honed any other razor?

    The point I'm working toward is that your 12k should be sufficient to touch up a previously correctly honed decent razor. You should not need to drop lower than that. If you do need to go lower, then I certainly wouldn't start with a 5K or worse, a 1k. You may not need another hone, you may need to become a better honer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •