Results 1 to 7 of 7
  1. #1
    Modine MODINE's Avatar
    Join Date
    Dec 2009
    Location
    Lee's Summit, Missouri- (KC)
    Posts
    1,442
    Thanked: 731

    Default BOI-HEMOTH TURKISH OILSTONE

    At least I think it is a Turkish oilstone. If someone else has any ideas please respond. It is from England and it did require cleanup and lapping. This is why I am not sure about the stones origins. The stone was lapped with a 325 DMT plate. The test razor was a Sheffield “Best Silver Steel” razor.

    Pitch was used to hold the stone in the wood cradle. To release the stone from the pitch, cold was used instead of heat. The stone was placed in a cardboard box and left outside over night. Nighttime temp was approx 10°F or -12C. There was less mess with this method. A little twisting and the stone popped right out of wood base.

    To remove the residual pitch on the stone, CRC Bathroom tile cleaner and a Scotchbrite pad was used with good results. The wood base was sanded and colored with some alkanet root and sealed with rubbing oil.

    Grit estimate is around the 8k mark, maybe higher. It improved the edge of this particular razor. This “Best Silver Steel” is the hardest steel I have tried to sharpen to date. Attached are some other novaculite stones it was compared with. From top to bottom,

    Boi-hemoth Turkish oilstone approx 8K.
    CF approx 25K
    Turkish oilstone approx 12-15K. Similar speckle pattern.
    The bottom stone is a translucent novaculite 25K or “Gravestone”. Kelly referred to as Hutchinson stone.

    The stone cleaned up nice with a green mossy appearance. It should last for quite some time.

    MIke

  2. #2
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1

    Default

    What stone? Is there supposed to be an attached image?
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  3. #3
    Modine MODINE's Avatar
    Join Date
    Dec 2009
    Location
    Lee's Summit, Missouri- (KC)
    Posts
    1,442
    Thanked: 731

    Default

    I know, I'm struggling getting the pics resized to fit. sorry

  4. #4
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1

    Default

    Quote Originally Posted by MODINE View Post
    I know, I'm struggling getting the pics resized to fit. sorry
    I thought maybe it was me. if you get stuck, try emailing it to me and I can post it for you
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  5. #5
    Senior Member
    Join Date
    May 2008
    Posts
    289
    Thanked: 46

    Default

    HEY HEY HEY, where are the pics!!! this is a crime around here!

  6. #6
    Senior Member blabbermouth JimR's Avatar
    Join Date
    Dec 2008
    Location
    Japan
    Posts
    2,746
    Thanked: 1014
    Blog Entries
    2

    Default

    If you're having resize problems, download the free software Irfanview, open the picture and under the "Image" menu, select resize. 640x480 is usually the best best. Save, then upload!

  7. The Following User Says Thank You to JimR For This Useful Post:

    MODINE (01-06-2011)

  8. #7
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •