Results 1 to 10 of 88
Thread: Chinese Hone
Hybrid View
-
04-15-2011, 11:52 AM #1
- Join Date
- May 2008
- Posts
- 82
Thanked: 15For what it's worth, I have one set of hones and only do razors for myself. I can easily achieve a good shaving edge from my 8K stone. That being said, I purchased the C12K based partly on some reviews here, and partly on it's price and local availability. The stone I have is very hard, and as said many times here quite a slow cutter. The speed of the cut is greatly increased with making slurry on the stone. I make the slurry with my DMT. I observed in Glen's videos his technique of a couple of figure 8's on his stones right before he puts a blade on them. This cleans the stone, and does provide a slurry. If I feel I need or want more, I just give it a couple more passes.
I will usually get the edge as perfect as I can with the 8K, then move on to the 12K with light slurry, diluting as I go. I just did an experiment with my 12K that produced excellent results. After I finished honing the razor, a shave test told me that while it was very sharp and adequately shaveable, it could have been a bit smoother. I went back to the hones, and did a pyramid on my Norton 8K and C12K stones. I started them both with a light slurry, and diluted through the pyramid, ending with water only on both stones. I finished with a few passes on the C12K with only water. I'll tell you what, I was SHOCKED at how much smoother the shave turned out. The shave literally went from a "That's a good shave" to "WOW that was an AMAZING shave"
Long story longer..... I like my C12K stone. I don't see how it can be beaten for the money, and the results I am able to achieve from it.
-
04-15-2011, 01:00 PM #2
- Join Date
- Jun 2010
- Location
- Brisbane/Redcliffe, Australia
- Posts
- 6,380
Thanked: 983Adam MA's post is my experience almost to a T.
Mick