Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
Like Tree8Likes

Thread: How hard is hard, and how fine is fine??

  1. #11
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by Neil Miller View Post
    or even people for that matter. Try classifying people!
    I can be hard and fast or soft and slow .... depending on who I'm interacting with. As to hones, I only estimate hardness by how the razor feels on the hone and by how fast the hone cuts. I have an Escher labeled y/g that has an end label that says "guaranteed soft". The hone doesn't feel soft but will auto slurry after awhile. So will a Shapton pro 15k IME.

    I gather from that label that a soft hone was considered desirable and the label a selling point ? I have a nakayama asagi that came to me by way of So that feels very hard to me. Performance is outstanding as a finisher. In trying to generate slurry with a credit card sized diamond plate (325) I found it difficult.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  2. The Following User Says Thank You to JimmyHAD For This Useful Post:

    alx (09-23-2011)

  3. #12
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    For me hardness is related to how tight the bonding of the grit is , polishing stone should not release grit while honing on it.
    Prepolishers are softer and more likely to release grit.

    Alex could you explain your rating system to us? You use 0-10 if I am not wrong?
    zib and maxim207 like this.
    Stefan

  4. The Following User Says Thank You to mainaman For This Useful Post:

    alx (09-18-2011)

  5. #13
    zib
    zib is offline
    Hell Razor zib's Avatar
    Join Date
    Nov 2008
    Location
    Jacksonville, Fl.
    Posts
    5,348
    Thanked: 1217
    Blog Entries
    4

    Default

    Quote Originally Posted by mainaman View Post
    For me hardness is related to how tight the bonding of the grit is , polishing stone should not release grit while honing on it.
    Prepolishers are softer and more likely to release grit.

    Alex could you explain your rating system to us? You use 0-10 if I am not wrong?

    I agree with Stefan here. This explanation makes sense to me. I know I'm late to the party, but the hardness scale is subjective, assigned by the Vendor.
    As far as I know, there is no bureau of weights and measures....Ha...!
    maxim207 likes this.
    We have assumed control !

  6. The Following 2 Users Say Thank You to zib For This Useful Post:

    alx (09-18-2011), maxim207 (09-18-2011)

  7. #14
    alx
    alx is offline
    Senior Member alx's Avatar
    Join Date
    Aug 2009
    Location
    Sonoma, California
    Posts
    418
    Thanked: 405

    Default About my rating system

    Stefan


    About 8 years ago when I first started selling Japanese natural stones I was carrying an inventory of about 75 stones which were all Old/New stock. My purchase funded an addition to the house for the little old man in Japan I bought my stock from.


    I was sort of out there alone with these stones, So-san spent more time surfing than selling, and I did not know that much altogether. This was the Shapton 30k era. I saw a need for challenging Shapton, and no one, including So-san was willing to talk grit sizes or to speculate as to the grit particles of the stones. All anyone would say was it is fine, or really fine or super fine, or in So-sans case "my father does not like to talk about such things", etc. or very slow or slow or fast or very fast. I wanted to open up the market to fellows and professionals who were already using the finest handmade Japanese laminated tool and knife blades but were sharpening them with synthetic stones, really wasting the intentions of the blacksmiths.


    It wasn't too long before I stepped off the deep end when I threw the figures "the grit can break down into the 30-40,000 range" for my best stones and about that time I invented a photographic system of observing the slurry to determine how soft a stone reacted under a blade and how jealous the stone was to cough up slurry. It did not matter if a knife or plane blade just so the system was consistant with the tester. I remember reading on this forum after a year or so, and on the knife forums also about that guy claiming his stones are in 30k to 40k range and how his stones are way too expensive.


    Anyhow my scale of 1-10 turned out to be top heavy because I found that any stone below a 7 was too soft and useless for tools so as a consequence all my results were in the 8-10 range. Sort of like with the 1-5 system the 1-3 levels are too soft for honing so why include them except to discuss nagura. Here is an example of the way I designed my system. This was before Nakaoka-san (aka 330Mate) invented the simpler straightforward 1-5Lv system which Metal Master picked it up and then others like Maxium here and most everyone else now.

    type in, thejapanblade.com/ and add, hard72.htm

    It was about 5 years of selling stones before I was contacted by any razor users, you Stefan were one of the first, for stones for razor honing. At that time I only had large tool size stones and I was selling to knife and tool users all around the world, I had one amateur sushi chef in NY buy 5 stones within two weeks for $11,000 all overnight FEDX.

    As it turns out the type of stones being touted right now as finishers were always regarded as too hard for tools until the idea of a Diamond Nagura was introduced by Peter Cowick, a sharpening sevant from back east. The DN really opened up a lot of doors for very hard stones which So-san would, until then, only recommend to be used by the most experienced sharpeners. Some of these were the finest stones and they were the most difficult to use and to hard sell.

    I know that Iwasaki published a guide on how to sharpen razors using a progressive nagura sequence, and this is the traditional way. In Japan still even now only the avent garde will use a DN to raise a slurry, but this is changing in part because true nagura is getting expensive and hard to find in the finest grits. Although there was a line a number of years ago of very hard asagi Nakayama Stones I believe created by Hatanaka-san and tailored to Iwasaki's specifications, in the past super hard stones were not necessarily the first choice for professionals, it was always about cutting strength, speed. Speed gets the job done faster and in Japan one of the signs of a professional is to get the job done fast, correct is assumed, but fast is something to achive. And I was reminded of this when it was either Jim or Dr. Naka asked to see Iwasaki-sans razor hones on a post here, and the first one he pulled out was a lovely large kiita stone. Speed in important and this is why in my 1-10 Hard system I made a special column and noted the amount of black iron and steel particles within the slurry, the direct result of cutting as opposed to burnishing or what is being called polishing.

    My Hard Tests were a crude way to try to create an objective way that sharpeners could discuss the attributes of a given stone. Obviously it was not a very successful method because over all these years no one ever contacted me to say that they had also repeated my test, and lets talk about it. Also the 1-10 scale is a bygone, I am now using the Lv1-5 test. Alx
    Last edited by alx; 09-19-2011 at 02:59 AM.
    Jimbo and bassguy like this.

  8. The Following 3 Users Say Thank You to alx For This Useful Post:

    bassguy (09-29-2011), Jimbo (09-19-2011), Skizzo (09-23-2011)

  9. #15
    alx
    alx is offline
    Senior Member alx's Avatar
    Join Date
    Aug 2009
    Location
    Sonoma, California
    Posts
    418
    Thanked: 405

    Default

    Hopefully you can more easily see the Hard Test here. Alx




    Last edited by alx; 09-23-2011 at 10:37 AM.

  10. The Following User Says Thank You to alx For This Useful Post:

    SharpMan (12-09-2011)

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •