Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree2Likes

Thread: Any experiences with these Jnats from aframestokyo?

  1. #1
    Senior Member
    Join Date
    Aug 2011
    Location
    Rhode Island
    Posts
    161
    Thanked: 32

    Default Any experiences with these Jnats from aframestokyo?

    I have just ordered this small whetstone from Aframestokyo, has anyone else tried one of these stones? If so I am interested in hearing some feedback.
    Nakayama Honyama Natural Whetstone 439.6g (15.7oz. )
    I have been wanting to try a Japanese natural hone for a while now, and at this price how could I say no? I've read positive reviews of the stones from this site, so I have high hopes. I am hoping for a good finishing stone, but if it ends up not being a good finisher I could possibly use it for my woodworking blades.
    Also a couple questions:
    - I did not order a nagura stone, will raising a slurry by diamond plate be sufficient?
    - Since the stone is thin, should I mount it to a block or wood with epoxy? Gorilla Glue? Any other suggestions.

    Thanks in advance for the wisdom shared here.

  2. #2
    Senior Member Kingfish's Avatar
    Join Date
    Dec 2008
    Location
    South Florida
    Posts
    1,057
    Thanked: 255

    Default

    I got a very nice kiita from a member here who got it from him. I guess there is always a bit of luck involved when buying a stone that has not had much expertise evaluation.
    As far as mounting, I have mounted various stones artificial and natural on slate using epoxie and never had one fail. If you use clear epoxie, you can color it with earth pigments for asthetics.
    You can definately use diamond nagura to increase cutting power. Nagura usage is a whole new game and not exactly cheap.

  3. The Following User Says Thank You to Kingfish For This Useful Post:

    Disburden (11-11-2011)

  4. #3
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    I suggest you get a stone from a trusted seller.
    Stefan

  5. #4
    Senior Member Vasilis's Avatar
    Join Date
    Sep 2011
    Location
    Thessaloniki, Greece
    Posts
    885
    Thanked: 202

    Default

    Japanese stones are overpriced, for 60$ I don't think the stone will be as good as you think. For someone who sells stones, and he has pieces with the same dimensions as this with 500$, means he knows which one is a hard-fine-fast one and which one isn't. I don't think you found the seller with the exceptional pieces with very low prices. I don't question the reliability of the seller, I'm just stating the obvious.

  6. #5
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    Hello Matt,

    Vasilis is right - you probably get what you pay for. He has stones priced at 1,760 dollars so he obviously knows what he is doing. I have had dealings with him several times - not only is he an experienced seller who knows what he is doing, but he is a very nice chap too. You can ask him any questions and he will do his best to help.

    Regards,
    Neil

  7. #6
    Junior Member
    Join Date
    Dec 2009
    Posts
    1
    Thanked: 1

    Default he is a decent seller.

    I had several stones from this this gentleman namedTakeshi. In fact, I own lots of jnats from various sellers like Alex, Maxim, So, 330mate and Morihei and I can tell definitely tell you that I've got some of my best stones from him! He never claims himself as an expert about jnats anyways, and he says that he is more liked tuned to knives since he is a chef himself. He's been very decent, very honest and a humble seller to me so far... That's been my experience with him and thanks for that Mr. Takeshi Aoki!!

  8. The Following User Says Thank You to nerve For This Useful Post:

    Neil Miller (11-11-2011)

  9. #7
    I Bleed Slurry Disburden's Avatar
    Join Date
    Feb 2009
    Location
    Carmel, NY
    Posts
    2,458
    Thanked: 545

    Default

    I've purchase two stones there, both were exceptional, but I know what to look for... that's the trick with aframestokyo.com

  10. #8
    zib
    zib is offline
    Hell Razor zib's Avatar
    Join Date
    Nov 2008
    Location
    Jacksonville, Fl.
    Posts
    5,348
    Thanked: 1217
    Blog Entries
    4

    Default

    You know, All natural stones are a crapshoot imho. All you can do, is give it a go, and see how it does.
    Like the other's mentioned, you get what you pay for, and that was very low priced for a Japanese Natural.
    Sicne it has no tomonagura, or slurry stone, you can raise a slurry with a diamond plate, atoma, or even sandpaper.

    You can absolutely mount it to a base if you like. I'd use some type of epoxy, something with some substance to it. If it's small enough for hand held honing, you may want to consider that. That's how I use my 7x1.5 Escher, and smaller hones.
    We have assumed control !

  11. #9
    Senior Member
    Join Date
    Apr 2010
    Location
    Central MA
    Posts
    118
    Thanked: 19

    Default

    Quote Originally Posted by nerve View Post
    I had several stones from this this gentleman namedTakeshi. In fact, I own lots of jnats from various sellers like Alex, Maxim, So, 330mate and Morihei and I can tell definitely tell you that I've got some of my best stones from him! He never claims himself as an expert about jnats anyways, and he says that he is more liked tuned to knives since he is a chef himself. He's been very decent, very honest and a humble seller to me so far... That's been my experience with him and thanks for that Mr. Takeshi Aoki!!
    I agree. I got a nice hone from him. He's a good guy.

  12. #10
    Senior Member
    Join Date
    Aug 2011
    Location
    Rhode Island
    Posts
    161
    Thanked: 32

    Default

    Thanks for all of the comments.
    To explain a little further my purchase, I am not expecting a $50 stone to necessarily perform like a very expensive on, or one that has been performance tested (thought this stone at least has a general grit/use rating). I have enough hones to get my razors shave ready to my liking, but I have been honing a lot recently and am just looking for something new to experiment with that I can afford right now. I know many Japanese naturals can get very high in price, so I figured for this price I can get something pretty cheap to play with, and will have a rough grit rating and multiple photos of it unlike the cheap Nakayamas from 330mate on ebay for example.
    Once I get the stone an try it out I will post an update on what I think.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •