Results 1 to 10 of 23
Thread: What have I found???
-
05-27-2012, 09:47 AM #1
- Join Date
- Apr 2009
- Location
- Sydney, Australia
- Posts
- 41
Thanked: 6What have I found???
Fellow enthusiasts,
I recently stumbled on this honing stone amongst some rubble on a friends building site. Turns out it was in old fishing boat that my friend received as payment for doing a building job. He didn't think much of it and threw it into the waste pile. Needless to say he let me have it when I saw it, but that explains the rather poor shape it was in. It was basically being walked on every day.
It's a blue grey natural stone, and although the pictures don't show it too well, you can see some veins in the rock. I lapped it smooth and it feels very very fine. The slurry was grey in colour. Anyone have a clue what it could be?
Cheers,
Bagman.
-
05-27-2012, 10:09 AM #2
A Japanese hone? It could be many things, but in the end, if you plan to keep it, it's performance is the most important thing. If you like it, no matter its name, its a good hone. It looks like a nice piece, fine. Something like nakayama asagi, but I don't have enough experience with the Japanese stones. And more importantly, it was free. Nice find!
-
The Following User Says Thank You to Vasilis For This Useful Post:
Bagman (05-29-2012)
-
05-27-2012, 10:25 AM #3
From the looks it could be a Thuringian but it would be a long way from home.
-
The Following User Says Thank You to Piet For This Useful Post:
Bagman (05-29-2012)
-
05-27-2012, 10:43 AM #4
That's what my first thought, but it is indeed a long way from home, the back is too yellow, unusual for most of the classic Thuringians and usual for the Japanese. If it is Thuringian, I suppose it should be soft because of its color(but not always), and fine. Test it, and inform us regarding its speed, hardness and how fine it is. It could be also a stone quarried from there. Every country has its hones.
-
The Following User Says Thank You to Vasilis For This Useful Post:
Bagman (05-29-2012)
-
05-27-2012, 11:00 AM #5
- Join Date
- Apr 2009
- Location
- Sydney, Australia
- Posts
- 41
Thanked: 6Thanks for the replies! I'll put a blade to it and see how it goes...
-
05-28-2012, 12:19 AM #6
what did you use to lap it, and how hard was it to lap ?
-
05-28-2012, 01:07 AM #7
- Join Date
- Aug 2011
- Location
- Upstate New York
- Posts
- 5,782
- Blog Entries
- 1
Thanked: 4249
-
05-28-2012, 08:15 AM #8
- Join Date
- Apr 2009
- Location
- Sydney, Australia
- Posts
- 41
Thanked: 6Lapped it with 80, 180 and 400 wet and dry. It probably took about 40 mins to get it nice and smooth, so it wasn't ultra hard but it did take a bit of effort. The slurry was a grey color.
-
05-28-2012, 08:50 AM #9
I doubt it's an Asagi. It's unusual to not see any skin on the sides or base but anybody's guess just what it is exactly.
-
The Following User Says Thank You to onimaru55 For This Useful Post:
Bagman (05-29-2012)
-
05-28-2012, 09:14 AM #10
I have Thuringian like that, but it also can be Asagi, need close up of the stone to see.
Thuringian they are usually super clean, where Asagi have some black spots or bit variation
-
The Following User Says Thank You to maxim207 For This Useful Post:
Bagman (05-29-2012)