Page 1 of 7 12345 ... LastLast
Results 1 to 10 of 66
Like Tree293Likes

Thread: Escher loved natural combos!

  1. #1
    Preserver of old grinding methods hatzicho's Avatar
    Join Date
    Jun 2012
    Location
    Germany
    Posts
    649
    Thanked: 1230

    Default Escher loved natural combos!

    I recently met a guy in the thuringian area whose grandfather once worked as the last blaster for the JGES company in the thuringian whetstone quarries.

    I got a lot of information and also gained some material from the legacy of the Escher company.

    One very interesting issue in the context of how the best stones for producing high quality hones were selected from JGES company is, that the workers were admonished to find, mine and select especially natural combination stones.

    These stones often were sold and mainly exported under the name barbers delight.

    In fact this seemed to be an Escher specialty because up today I have not seen such a combo from the other thuringian whetstone companies –even though they surely do exist because the stones often come from the same quarries.

    So the pictures you will see in the following show the material as it was found and mined in the thuringian slate mountains. Mostly these are tail cuts of the large stones the famous Escher hones were cut from.



    Name:  IMG_5678.jpg
Views: 1991
Size:  55.1 KBName:  IMG_5680.jpg
Views: 1947
Size:  48.4 KBName:  IMG_5681.jpg
Views: 1988
Size:  43.4 KB



    Looking at the exterior shell of the slate stones the different colors are sometimes not visible. The combination gets visible after the stone had been cut. To select those stones in the quarries - if not the different layers were directly cut during mining - must have presumed a lot of experience from the miners in the past.


    Name:  IMG_5687_88.jpg
Views: 1875
Size:  38.7 KBName:  IMG_5688_89.jpg
Views: 1891
Size:  46.1 KB



    Sometimes the layers and especially the yellow/ yellow green ones have been very thin. Here you see a couple of three colored stones were the yellow green layers is only about a quarter of an inch or 5 mm thick and packed between two blue layers.


    Name:  IMG_5702.jpg
Views: 1921
Size:  39.7 KBName:  IMG_5707.jpg
Views: 1934
Size:  23.2 KB



    Some more pictures for all Escher and Thuringian lovers – enjoy!

    Name:  IMG_5693.jpg
Views: 1905
Size:  52.3 KBName:  IMG_5696.jpg
Views: 1872
Size:  52.3 KBName:  IMG_5691.jpg
Views: 1918
Size:  44.0 KB

  2. The Following 44 Users Say Thank You to hatzicho For This Useful Post:

    25609289 (06-10-2013), adrspach (06-10-2013), bartds (05-06-2020), Bram (04-24-2014), Catrentshaving (06-09-2013), CJBianco (01-16-2016), Croaker (06-11-2013), doorsch (03-21-2018), Double0757 (06-10-2013), Frankenstein (06-10-2013), Geezer (06-09-2013), gooser (06-10-2013), HNSB (06-10-2013), islandshaver (06-10-2013), JimmyHAD (06-09-2013), JOB15 (02-26-2018), Jonah (06-10-2013), Kingfish (06-10-2013), Lemur (06-11-2013), livingontheedge (06-09-2013), Lynn (06-09-2013), mainaman (06-10-2013), Margeja (06-10-2013), Martin103 (06-09-2013), Mcbladescar (06-09-2013), Neil Miller (06-10-2013), nipper (06-11-2013), nun2sharp (06-11-2013), outback (02-26-2018), ovidiucotiga (02-28-2018), pfries (06-09-2013), Phrank (07-02-2015), RogueRazor (06-09-2013), roughkype (06-10-2013), RusenBG (02-09-2018), saitou (06-13-2013), SirStropalot (06-09-2013), Skippy (06-10-2013), Stoned (06-12-2013), Substance (07-02-2015), Traskrom (06-10-2013), Utopian (02-06-2018), Vasilis (06-09-2013), xiaotuzi (02-06-2018)

  3. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Magnificent !

    I have such a Barber's Delight ....... will post pix later ..... off to church now. Thanks very much for this thread, I hope more new history will be forthcoming.

  4. #3
    I love Burls....... and Acrylic HARRYWALLY's Avatar
    Join Date
    Mar 2012
    Location
    Baden, Ontario
    Posts
    5,475
    Thanked: 2284

    Default

    Those are awesome. I'm still holding out, trying to stumble upon a boxed Escher at the antique stores I frequent. I figure the area I'm in is a dominant German area, there has to be some kicking around. I can find tons of old Bokers and October fest hats but no Thuringians. Its amazing how those stones look in their raw form. Very beautiful coloring on them. I bet they look even better wet. Thanks for showing them.
    Geezer, hatzicho and saitou like this.
    Burls, Girls, and all things that Swirl....

  5. #4
    Member
    Join Date
    Apr 2013
    Posts
    63
    Thanked: 3

    Default

    That's some hardcore research right there.
    hatzicho likes this.

  6. #5
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Here is a Barber's Delight labeled gelb-grun (yellow green). I was fascinated that it is a combo when I got it and was tempted to soak the back label off. I didn't because I have a blue/green and the old labels, unlike the Escher & Sohn labels, are very hard to get off without ruining them. Anyway ...... here it is;

    Name:  esch.barb.delite.jpg
Views: 1865
Size:  15.7 KBName:  escher1.jpg
Views: 1849
Size:  18.1 KBName:  escher2.jpg
Views: 1842
Size:  21.0 KB

  7. #6
    Preserver of old grinding methods hatzicho's Avatar
    Join Date
    Jun 2012
    Location
    Germany
    Posts
    649
    Thanked: 1230

    Default

    Great one Jimmy!

    Here you have the stones in comparison to the largest officially sold Escher combo I own, a 9 x 2 inch stone.

    Name:  IMG_5708.jpg
Views: 1823
Size:  49.0 KB

    The hone really is more white in color than green.

    Name:  IMG_5710.jpg
Views: 1769
Size:  56.3 KBName:  IMG_5711.jpg
Views: 1806
Size:  54.6 KB

    From the label only an edge is remaining, but clearly showing this is an Escher.

    Name:  IMG_5713.jpg
Views: 1792
Size:  35.6 KB

    I purchased this stone from the son of an old barber. I bought in total 3 large thuringians and one French special stone from him. Concerning the combination stone he told me that his father always used this stone for the very endfinishing of the razors, only taking a few strokes on it. Happenstance for me because the stone was not worn out much! It is one of my absolute favorite finishers.

    Sometimes the stones were not cut along the layers but crossways. Also great looking stones. I have not tried honing on them but being curios how it will feel.

    Name:  IMG_5715.jpg
Views: 1784
Size:  35.1 KBName:  IMG_5719.jpg
Views: 1776
Size:  32.4 KB

  8. The Following 3 Users Say Thank You to hatzicho For This Useful Post:

    25609289 (06-10-2013), bartds (05-06-2020), CJBianco (01-16-2016)

  9. #7
    Poor Fit
    Join Date
    May 2010
    Posts
    4,562
    Thanked: 1263

    Default

    That's really cool. Thanks so much for sharing all this and the eye candy as well!

  10. #8
    Modine MODINE's Avatar
    Join Date
    Dec 2009
    Location
    Lee's Summit, Missouri- (KC)
    Posts
    1,442
    Thanked: 730

    Default

    Thank you for sharing hatzicho. This is verrrry interesting information. Here is another example. I am doing some comparison testing now with a Barbers Delight.
    Mike


  11. #9
    Senior Member Kingfish's Avatar
    Join Date
    Dec 2008
    Location
    South Florida
    Posts
    1,057
    Thanked: 255

    Default

    In historical context, "combination" must have had an entirely different meaning than our current perspective. We now think of combination stone having for example a course and a relatively finer side. Barber's Delight stones were apparently never intended to be used on the darker side as the label was always found there.

  12. #10
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by Kingfish View Post
    Barber's Delight stones were apparently never intended to be used on the darker side as the label was always found there.
    Of course the lighter colored stones were more expensive than the darker. Not hard to see why the label went on the dark side. Not that the darker stones weren't very good as well. I assume that the price differential was a reflection of the scarcity of the lighter stone rather than because it was considered superior ? I wonder if the old man from the mine would know the answer to that ? FWIW, I consider the lighter stones better in that they seem as fine but faster. YMMV.

Page 1 of 7 12345 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •