Thread: To tape or not to tape - Newbie question

I generally use one layer of tape. First it eliminates any further spine wear on an old razor or new wear on a new razor. Depending on the age of the blade and wear I may use two layers of tape. If there is gold wash on the spine I immediately use tape.

Hi everyone,

Thanks for the fast and friendly feedback.

Originally Posted by Nightblade

There are as many opinions on this as their are stew recipes I would imagine but, I have been told the tape makes very little difference to angle to worry about as it is more for keeping spine wear down,especially if your honing someone else's blade.

1 layer of tape #1

Originally Posted by Birnando

First off, when you see references to more than one layer of tape we are talking about something different than honing.
We use that, as needed, to correct various geometrical issues on razors with specific challenges such as uneven hone wear and wahtnot.

Thanks for this input. It looks like this is not what I am looking for right now.

Originally Posted by Birnando

Now, as for the whole tape or no tape debate, here's my take on it.
Both methods will both work just fine.

Some will use it to elliminate hone wear on the spine.

1 layer of tape #2

Originally Posted by Birnando

This can be useful when you have say gold wash on the spine or other stuff like filework and so on.

The whole argument about chage in angle due to the layer of tape, even when talking about honing the razor for decades is in my humble opinion a load of ballony.

So, again, either will work just fine.
It's all a matter of preference.

Originally Posted by rhensley

I use tape on every razor I hone. 3 of the best hone masters I know use tape. I learned from them. Now i'm not saying i'm as in there class but I get a decent shave off my edges and don't scratch my blade. I start out with 1K then the 3k next the 8k then 12k and I finish up with the 20K. I will at a later date add the 5K to the sys. all are the naniwa supper stone the 20 I cant spell. I guess what i'm saying is tape or no tape it's really up to you. Some blades maybe warn enough to use tape to get the bevel as you need it. I have one that I use 2 layers of tape for that reason. there are several videos on utube to watch that may help. Good luck.

1 layer of tape #3

Originally Posted by monkeypuzzlebeefeater

When I started out I really struggled until I started using 1 layer of tape, personally I found the tape really helped me especially with being consistent.

1 layer of tape #4

Originally Posted by bouschie

I generally use one layer of tape. First it eliminates any further spine wear on an old razor or new wear on a new razor. Depending on the age of the blade and wear I may use two layers of tape. If there is gold wash on the spine I immediately use tape.

1 layer of tape #5

Summary: From now on it will be 1 layer of tape. 5 helpful guys told me so, and no one adviced me on how to avoid spine wear without the tape. I am struggling to get a 4000/8000 stone, and might be getting a finer one later on (actually trying to trade them for some vintage fountain pens I own). But this will take time, as they are not available where I live.

Rgds

Martin

What Birnando said: "a load of ballony"

I don't hone for hire so never use tape, even for "problem" razors. Just use the spine as a guide; don't apply more pressure on the spine than is required to keep it in contact with the hone. (Actually touching the hone with the spine isn't always necessary or even advisable.)

Call it as you see it mate. I always reserve my position. and make a final choice based on facts. And like you, don't hone for cash.

Regards

Bob

Ephemeral: the feeling of all steel on a hone. There are exceptions where I think tape is necessary which others have said.
Non-ephemeral: It now feels like it takes me forever to center the tape on the spine because I am a fanatic for symmetry.
Good Luck