Results 11 to 20 of 41
Thread: Gold dollar
-
04-04-2015, 09:17 PM #11
-
04-04-2015, 09:20 PM #12
-
04-04-2015, 09:48 PM #13
-
04-04-2015, 09:52 PM #14
That's not a bad idea but how are you going to know you did a good job? You could be a great honer, it still wouldn't be a good shave. You may get discouraged I know I did. Spent hours on it so I could even hone it... Still sucked. It does make improve your stroke though because after 1000 strokes you get pretty good and after 1000 it still sucks... Haha
-
04-04-2015, 11:09 PM #15
-
04-05-2015, 05:11 AM #16
If this is what you want to do, then do it & enjoy it.
My opinion for your situation & many others who are in the same situation as you, is this;
You have "3" quailty razors with "known" edges,, meaning, you are shaving with them & not complaining about the results. You know that eventually the edge/results/shave will start to degrade. Select a finisher & learn to "maintain" the edges on the 3 known edges that you have; maintaining is honing & it is a much simpler process than running a problem/unknown edge through the honing progression. Maintaining the edge can be as simple as 10 to 20 light strokes on the finisher, strop & your back to that comfortable edge that you know.
After you have maintained your 3 good razors for a few months,, then take one of them & drop it to the 8K or even 4K level,,, then put it back through your same finisher. You now have a standard to compare with, that you created.
I can attest that spending days or weeks on a problem razor, when I first started, did not make be a better honer,,, it was just stubborn stupidity on my part, it wore me out mentally & I put it away for 3 years,,,,, got bored one day & finished it to a good shave in 45 minutes.
Your technique can only be sharpened, if your technique is good to begin with.
Build a good technique first,,, JMO......
-
The Following User Says Thank You to Hirlau For This Useful Post:
Razorfeld (04-05-2015)
-
04-05-2015, 11:12 AM #17
why bother it wont teach you how to hone a real razor ,, but then again why hone when you first start , its cheaper and you get much better edges from the guys who know so you can concentrate on learning to shave at your early entry good luck with the RSO tc
“ I,m getting the impression that everyone thinks I have TIME to fix their bikes”
-
04-05-2015, 11:43 AM #18
Everyone who replied has good advice. But it's really up to you who's advice you go with. I would however have a pro honed blade to compare my work too. when I started I acquired many razors off the Bay and at antique stores in my area. I cleaned them all and sent them to a real pro in my opium. when I got them back I started my journey to straight razor shaving. When I felt comfortable I ordered the stones and watched the videos by the pros . I practiced on the less expensive razors. these were less expensive but not less quality. I had found names like Henckel boker double duck all for less than 40 dollars each. now they were ruff but the cutting edge was ok so when the edge got to where I could shave with it without crying I thought I was on my way . I don't know what the gold dollar razor cost or how it compares to other brands. I would not buy one because I read the post here and listen to members on which not to buy. I hope you have good luck with your chore ahead of you.
-
04-05-2015, 01:17 PM #19
If you can't get a good shave after honing a gold dollar you will not know if it is your skills or the razor. You are better served using a razor you have shaved with one you know can hold an edge and did not cost a fortune or is a favorite. Practice with that and shave. You will know if it is skill rather than GD luck.
"The best way to have a good idea is to have a lot of ideas." -Linus Pauling
-
04-05-2015, 02:30 PM #20
Good luck! I think there is plenty to be learned from working with a GD. You're gonna want to get a DMT to go with it.