Results 1 to 10 of 76
Thread: Mid-range tips
Threaded View
-
10-02-2015, 02:14 AM #13
When my bevel is finally set by 2k I then look for an even polish forming which begins at the edge & not the shoulder using mid stones etc.
There will be no chips or wire at the 2k bevel set. A good low power loupe will help see if you are doing too much & also if the bevel is not quite set in the first place.
May go without saying but inspect both sides of the bevel“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”