Thread: Hone of the Day

I did nearly the same thing with my Hart last weekend, dropped it edge down on the corner of my vermio finisher.

We've all done it. My condolences to the lost steel of your Hart JOB15!

BTW, never sling water off a hone or razor, about 1/1000 of the time you'll sling the hone or razor, and you will be very sad. Don't ask me how I know this.

Cheers, Steve

Originally Posted by Steve56

We've all done it. My condolences to the lost steel of your Hart JOB15!

BTW, never sling water off a hone or razor, about 1/1000 of the time you'll sling the hone or razor, and you will be very sad. Don't ask me how I know this.

Cheers, Steve

How do you NOT know this.

Touched up my Henkels fridour 72 1/2. Stupid hard steel and was just missing after my last session although the others came up fine. Touched up on the Narutaki with slurry then clear water.

Also working on a gd for the friend of a friend. Tried to do it himself and messed it up. Had to fix heel and toe profiles flatten edge, remove chips and remove a small frown. Started with the atoma 1200 then onto Chosera 1k with slurry high honing and then down to flat. Eventually got it right and now will take hair above the skin. Will finish with 3, 5, 8, and 12k Naniwa Super Stones and crox when I get a chance. At least all the hard work is done

Another Russian razor honed with no tape, steel to stone. Final finish on unknown stone 30-50 passes w/slurry....


watered down slurry for another 30-50 passes...


finish w/ water only for 30-50+ passes. Keep that steel singing!

Mike

Mike i love this stripped thuri of yours Exelent stone -looks very pure and fine .

I hone my new Paramilitary 2 on a Solviet era, hard barber hone .

A very nice pair of Iwasaki Kamisori in for Monday the start to the week don't get much better, these two only needed to visit the Chosera 5K then the Snow White 8K Naniwa 12K finished on the Suehiro Gokumyo 20K I'm extremely pleased with both edges.