Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Senior Member
    Join Date
    Apr 2008
    Location
    Boston, MA
    Posts
    1,486
    Thanked: 953

    Default How often do you touch up?

    I know there are a myriad factors involved, but how often do you guys touch up your blade on a hone/chrome ox? Ie, assuming you use linen/canvas and leather stropping every day, how many shaves to you usually go with each razor before you touch it up beyond the linen/leather with a pasted paddle strop or finishing hone?

    When I started, I had just a TM 4 sided (with 3 sides pasted) paddle strop and a non-professionally honed razor. I found myself going to paste every shave, and then learned on shaving websites that my bevel might not be right, and also figured out I just am not very good with paddle stropping. I also was using too extreme an angle when I shaved - basically I was doing stuff all wrong but still getting good shaves.

    I recently got a Lynn-honed Filarmonica and TM hanging strop, and so far with that get up I'm at shave 12 and counting without needing a touch up, and could see going for a while without hone touch up based on how good and smooth the shaves still are at shave 12. I also found on the same lesser unprofessionally honed razor I'd used before I can now go about 8 shaves without need for some chrome ox touch up just by going from leather paddle to leather hanging plus canvas, but then it gets pretty scratchy. So for me, having a professionally honed razor made a huge difference, shaving with a less steep angle is probably helping, and also I just do a better job stropping with a hanging strop/canvas setup than I did with leather on paddle. I'm buying a yellow coticule from Howard soon as well and look forward to adding that to my "keep it sharp" program.

    But to give myself some idea of what I'm shooting for, I'm curious from those with more experience, how long do you usually go before you decide to do a touch up on a swaty or 12k or coticule or chrome ox or whatever is your weapon of choice?

    I think I've seen some say months, and some say every couple of weeks. And I'm not looking for the "how long can you stretch it between touch ups if you have to to prove your razor is forged from the same steel used on the Sword of Shannara" answer, but what do you generally do to make your shaves most comfortable. And just to be clear, I'm asking how many shaves you go on each razor before touching up - so if you only touch up a razor every eight weeks, but you only use each razor once a week, that's touching it up every 8 shaves, not every eight weeks - I only say that because I've seen posts saying you can go half a year but I know the poster has eight million razors so I'm not sure what that means in terms of how many shaves they are really going with a particular razor before touching up.

    Thanks!

  2. #2
    < Banned User >
    Join Date
    Feb 2008
    Posts
    3,763
    Thanked: 735

    Default

    I haven't had a ton of experience, but I will say that it may depend on the razor itself.

    I have a Dovo Renaissance that has gone about 20 shaves so far without needing a touchup at all. I was going to see if it was indeed made by the same blacksmith as the sword of Shanarra, but I'm in the process of re-scaling it, so I'll re-hone it while I'm at it too. After that I'll see how long it goes.

    Most all of my other razors I find that I end up screwing around with touching them up sooner than that.

  3. The Following User Says Thank You to Seraphim For This Useful Post:

    loueedacat (06-26-2008)

  4. #3
    Senior Member
    Join Date
    Aug 2006
    Posts
    882
    Thanked: 108

    Default

    It really does depend on the razor. I have a very faint amount of chrome oxide on my canvas and this seems to keep most razors going a long time.

    In my experience sheffields need touchups more frequently, but the feel of the blade is 'softer' against the skin than Solingens, so I prefer them (maybe someone who knows steel will step in here and tell me I'm talking nonsense, but this is my experience.) My favorite sheffield I use chrome-on-canvas every fourth shave or so and take it to an escher every 15 shaves, approximately.

    For what it's worth I have a few Fillies and they seem to keep their edge an unusually long time. I love those razors, the edge they take seems to have the perfect balance of very crisp and very smooth, and they last forever.

    But in general with increased confidence in honing I care a lot less about which razor keeps its edge forever. Taking a razor to an escher takes about five minutes and it's part of the whole experience.

  5. #4
    Member
    Join Date
    Apr 2008
    Location
    North Haven, CT
    Posts
    73
    Thanked: 4

    Default

    I'm about 18 shaves into a Lynn-honed blade and I haven't had to do anything but strop it so far. I was planning on touching it up after 25-30 shaves but that's up to the blade, not me.

    Really, though, I just dropped in to give you props for the Sword of Shannara reference...one of the most beloved books of my youth.

  6. #5
    Previously lost, now "Pasturized" kaptain_zero's Avatar
    Join Date
    Oct 2005
    Location
    Winnipeg Manitoba Canada
    Posts
    1,333
    Thanked: 351

    Default

    Well, there is need and there is want. I do not NEED to touch up my razors all that often but I CHOOSE to do so about every 5 to 10 shaves depending on the razor. I like my razors the most when they are fresh off a honing session and while they still work well a week later and can probably go for quite some time after that, I don't enjoy the shave as much. I was the same way when I used DE's, I'd be tossing the blade after 3 shaves rather than a weeks worth.

    My personal opinion is that a light touch up once a week or so on a CrO2 pasted strop, or maybe a few passes on my Coticule if it's not responding the way I want, will go a long ways towards avoiding major honing sessions. I feel that frequent, light touch ups help the edge last longer than letting it dull as once it begins to dull, the cutting pressure increases which causes additional wear on the edge which now will begin to dull faster which increases the cutting pressu....... In other words, not keeping on top of the edge allows the wear to snowball and while it will continue to shave well for a long period of time, the mounting wear and tear simply puts the blade closer and closer to a major honing session which does remove steel from the blade.

    I hope that made sense....


    Regards

    Christian
    "Aw nuts, now I can't remember what I forgot!" --- Kaptain "Champion of lost causes" Zero

  7. #6
    Senior Member Howard's Avatar
    Join Date
    Jun 2005
    Location
    Massachusetts
    Posts
    686
    Thanked: 118

    Default

    "It's easier to keep your blade sharp than it is to sharpen your blade". I touch up about every 3 shaves with a bout I keep in the medicine cabinet solely for that purpose. By "touching up" I mean about 5 licks on each size of the razor.

  8. The Following User Says Thank You to Howard For This Useful Post:

    loueedacat (06-26-2008)

  9. #7
    Senior Member
    Join Date
    Apr 2008
    Location
    Boston, MA
    Posts
    1,486
    Thanked: 953

    Default

    Quote Originally Posted by DaveF View Post
    I'm about 18 shaves into a Lynn-honed blade and I haven't had to do anything but strop it so far. I was planning on touching it up after 25-30 shaves but that's up to the blade, not me.

    Really, though, I just dropped in to give you props for the Sword of Shannara reference...one of the most beloved books of my youth.

    Me too on Shannara. I picked up the prequel [when the sword was actually forged] and read it last year, which took me back to reading the first one some thirty years ago.

  10. #8
    Senior Member
    Join Date
    Apr 2008
    Location
    Boston, MA
    Posts
    1,486
    Thanked: 953

    Default

    Quote Originally Posted by kaptain_zero View Post
    Well, there is need and there is want. I do not NEED to touch up my razors all that often but I CHOOSE to do so about every 5 to 10 shaves depending on the razor. I like my razors the most when they are fresh off a honing session and while they still work well a week later and can probably go for quite some time after that, I don't enjoy the shave as much. I was the same way when I used DE's, I'd be tossing the blade after 3 shaves rather than a weeks worth.

    My personal opinion is that a light touch up once a week or so on a CrO2 pasted strop, or maybe a few passes on my Coticule if it's not responding the way I want, will go a long ways towards avoiding major honing sessions. I feel that frequent, light touch ups help the edge last longer than letting it dull as once it begins to dull, the cutting pressure increases which causes additional wear on the edge which now will begin to dull faster which increases the cutting pressu....... In other words, not keeping on top of the edge allows the wear to snowball and while it will continue to shave well for a long period of time, the mounting wear and tear simply puts the blade closer and closer to a major honing session which does remove steel from the blade.

    I hope that made sense....


    Regards

    Christian
    that makes a lot of sense, and the DE analogy resonates with me. I always chucked my M3 and DE cartridges after three uses for exactly the same reason.

  11. #9
    BHAD cured Sticky's Avatar
    Join Date
    Jan 2008
    Location
    Indiana
    Posts
    1,306
    Thanked: 230

    Default

    I am firmly in kaptain_zero's camp on this one.

    Depending on the razor, a touch-up is needed every 30 to 60 shaves.

    By preference: about every 20 shaves, I do 5 to 15 laps on a barber hone.

  12. #10
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,947
    Thanked: 13221
    Blog Entries
    1

    Default

    There are just way to many variables to get an answer that means anything to any other person other than the person answering the question......

    Wow was that confusing or what????

    Just think about some of the more logical variables here

    Razor, hone, honer, strops, pastes, shaving angle, beard thickness, hair thickness, lather, number of passes , and probably 10 more that I cant think of off hand.....

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •