Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Senior Member
    Join Date
    Oct 2008
    Location
    Coventry, UK
    Posts
    106
    Thanked: 9

    Angry Coticule with chip

    I bought a Coticule bout a few weeks ago, and was very happy. Unfortunately, I have now noticed a chip on the edge, that I suspect may have appeared since I bought it. I have been very careful with it, and definitely not knocked it on anything.

    The chip is right in the middle of one of the long sides of the stone, about 1/8th square, and right on what looks like a seam/vein (not sure of the terminology!) in the stone, which I am guessing is a weak point. I have used it a couple of times since, only honing from the other side of the stone to avoid it.

    Is there any thing I can do to make it so it's safe to hone on that side? Will it do any damage at all to my razors? Would sanding it to remove the sharp edges help?

    It wasn't too cheap as it is one of the bigger ones, so I am a bit upset to say the least!

    I am at work at the moment, so I don't have any pictures. I will attach a pic later.

    Last edited by darrensandford; 11-25-2008 at 12:22 PM. Reason: Remove vendor name

  2. #2
    Senior Member
    Join Date
    Aug 2006
    Posts
    882
    Thanked: 108

    Default

    The pic will be helpful.

    It's possible that it could be easily lapped out. Being natural products coticules often have minor flaws. If it's major my guess is they'll replace it.

    Just so you know, the etiquette at SRP is usually that you take up these sorts of things with the vendor before publicly posting. If you're unsure whether something's a problem in the first place, you could post a general query first (preferably with pics) not naming the vendor, and then based on feedback take it up with the vendor.

    For what it's worth, both of my vintage coticules have chips; one even has a chunk missing on one side. Neither flaw interferes with my honing. Regardless of flaws you'll want to be rounding the edges if you haven't already.

    This is not meant to be a slap on the wrist or anything, I'm just telling you for your information. You can see the logic. The vendor might take care of the problem (if it is a problem) to your absolute satisfaction, but there will forever be this post here for other newbs to read, leaving a little shadow of doubt in their minds about the vendor.

  3. The Following 2 Users Say Thank You to dylandog For This Useful Post:

    ArdennesCoticule (11-25-2008), darrensandford (11-25-2008)

  4. #3
    Senior Member
    Join Date
    Oct 2008
    Location
    Coventry, UK
    Posts
    106
    Thanked: 9

    Default

    I removed the vendor name. I am not unhappy with the stone, and wasn't trying to imply that the service or product I received was substandard. I was really after a way to fix the problem.

    I will post a picture later, but I suspect that the chip is about 1/8th deep as well. That seems like a lot of stone to me, but I suspect that even with that removed, the coticule will last a lifetime anyway

    Thanks for the heads-up.

  5. #4
    Heat it and beat it Bruno's Avatar
    Join Date
    Nov 2006
    Location
    Belgium
    Posts
    15,130
    Thanked: 5229
    Blog Entries
    10

    Default

    I have a Japanese stone that was chipped Removing the chip would have been too much work, so I just rounded the edges of the chipped part with sandpaper.
    It works perfectly and the missing bit is causing no problems because it is rounded.
    Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
    To spit in Sightblinder’s eye on the Last Day

  6. The Following User Says Thank You to Bruno For This Useful Post:

    darrensandford (11-25-2008)

  7. #5
    Senior Member
    Join Date
    Aug 2006
    Posts
    882
    Thanked: 108

    Default

    Quote Originally Posted by Bruno View Post
    I have a Japanese stone that was chipped Removing the chip would have been too much work, so I just rounded the edges of the chipped part with sandpaper.
    It works perfectly and the missing bit is causing no problems because it is rounded.
    This is exactly what I did with the missing chunk from my coticule.

    You need one edge with no flaws to x-properly. Flaws on the far edge won't hurt anything if they're rounded like Bruno explains.

    There's a difference between veins and cracks on coticules. If you've got a crack, and the chip you're talking about is just the beginning of crumbling deterioration, then you might well want to have it replaced.

  8. The Following User Says Thank You to dylandog For This Useful Post:

    darrensandford (11-25-2008)

  9. #6
    Senior Member
    Join Date
    Apr 2008
    Location
    Boston, MA
    Posts
    1,486
    Thanked: 953

    Default

    My yellow coticule broke a little chip along a vein after I'd used it for a couple months. I think that just is part of the fun with naturals. I lapped it a bit to smooth it, but it's no issue. First, the slurry fills it up, and ifyou are careful the blade just slides right over it. And as i've used the coticule more and more it is of course disappearing.

    I have a Y/G escher that sprunk a chip first time I lapped it - same thing - I smoothed it a bit, and just keep on using it, and the slurry fills the holes anyway (and the other side was more compact and didn't chip when I lapped it).

    So if this needs to replaced go that route, but don't let it bug you other wise bec it's part of the joy of the natural stones. Just remember to use your slurry stone.

  10. The Following User Says Thank You to loueedacat For This Useful Post:

    darrensandford (11-25-2008)

  11. #7
    Senior Member
    Join Date
    Oct 2008
    Location
    Coventry, UK
    Posts
    106
    Thanked: 9

    Default

    I don't think it's a crack, just a vein making a natural weak point.

    Thanks everyone. I think I will just be careful and hone from the good side.

  12. #8
    Senior Member
    Join Date
    Oct 2008
    Location
    Coventry, UK
    Posts
    106
    Thanked: 9

    Default

    Here are the pics anyway

    You can see the chip along with the little line it sits on. It does look smaller than it looks in my head!

    http://farm4.static.flickr.com/3165/...219dafd1_b.jpg



    http://farm4.static.flickr.com/3223/...7b99ee49_b.jpg



    http://farm4.static.flickr.com/3229/...50673025_b.jpg


  13. #9
    Senior Member Milton Man's Avatar
    Join Date
    Sep 2007
    Location
    Ottawa, Canada
    Posts
    971
    Thanked: 132

    Default

    I reckon that can be easily lapped out and chamfered out as already noted - it's not that large after all.

    It's funny how these things seem to magnify in size and scope in our head. I have the exact same problem!

    Mark

  14. #10
    # Coticule miner # ArdennesCoticule's Avatar
    Join Date
    Nov 2008
    Location
    Hasselt, Belgium
    Posts
    76
    Thanked: 155

    Default

    That's nothing my dear Coticule user .

    But if you want you can send it back to us (even in case you didn't bought it directly from us) and I'll replace the stone.
    PM or email me if you are interested!

  15. The Following User Says Thank You to ArdennesCoticule For This Useful Post:

    darrensandford (11-25-2008)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •