Results 1 to 10 of 12
Thread: LAPPING SANDPAPER OR DMT?
Hybrid View
-
03-08-2010, 10:12 PM #1
What do you mean by "better results" and what hones were you lapping?
-
03-09-2010, 03:41 AM #2
A good question. To the OP, it is now a known fact that using a DMT 1200 for lapping waterstones will ruin the plate sooner than later. How soon depends on what and how much you're lapping with it. Could that account for your lesser results with the diamond plates ?
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
03-09-2010, 03:59 AM #3
I'm curious as to "what stones" also.
I've always used a DMT8C or DMT8XC on my Shapton Glasstones. If by "better results" you mean a smoother surface that can be fixed. It's late, and shaptons are kinda different so my experience won't be much help unless thats what you're using.
I like the DMT.
...and to what JimmyHad...Yep, my DMT8C is needs replacing...and it's been less than a year. ("Diamonds Last Forever", )
-
03-09-2010, 06:41 AM #4
Tavli,
Currently I use 400/600 grit silicon carbide paper with my Nortons & Naniwas.
This is mainly because I can't get a suitable DMT plate in the UK ;
I am going to order one from SRD
Have fun !
regards
Russ
-
03-09-2010, 07:02 AM #5
The stones are all Naniwa 1 - 12K. the 'better' result is that the sandpaper seems to give a slightly smoother finish.
-
03-09-2010, 07:59 AM #6
This company sell DMT in the UK, there are a few others as well.
Beesleys Tool Shop Bench Stones'Living the dream, one nightmare at a time'
-
The Following User Says Thank You to welshwizard For This Useful Post:
PhatMan (03-09-2010)