Thread: Loving my coticule

Originally Posted by Jeltz

(...)Unfortunately being a slow stone forming the bevel was a challenge that I wasn't winning and I was starting to get rather disappointed that the slurry on my slow stone remained so light indicating that it was removing very little metal.

Eventually I gave up and set the bevel using my King Combo stone; 40 half strokes on the 1000grit side with slurry then 20 laps without slurry then 20 laps on the 6000 side with slurry then 20 on just water. I then raised a slurry on the Coti and did about 30 laps on a thick slurry, then taped and did 30 laps on a light slurry then 60ish on just water. (...)

The golden rule I was advised is to quit trying to set the bevel on a coticule, if it takes more than 15 minutes. It indicates that the blade needs a more serious correction on a coarse 1k-ish stone. From it, you can pick it up back on a coticule.

Also, when you're working on a bevel using heavier slurry, remember that it removes steel and dulls the edge at the same time. So if you try to shave arm hair straight off thick slurry, chances are you will never hit it. Dilute it to milky consistency, work on it a bit, and check again.

best regards,
Matt

All I've read about La Nouvelle would indicate if you have the slow end of the vein, it might not be the hot tip for womb to tomb coti work, but with alot of patience and alot of strokes or circles, the finish might be impressive.

I agree that bevel sets are not the coti's forte. They do it. They work. There's better ways.

My experience is limited to the La Petite Blanche, and not much time on it. It's fairly fast on slurry and water - darkens either in 15-22 strokes. I don't have any method that takes a blade from a set bevel to 8k+ faster. I'm used to Norton 1/4k, Nani 8k. This stone works faster, and the edge feels more keen than the Nani.

I'm still working the dilution process, and have yet to have an edge that approaches the N-asagi, if that's possible at all. 'Just paying my dues to do the work and develop the skills for now. The pay's not that good, but it's great work!