Results 1 to 7 of 7
LinkBack URL
About LinkBacks-
04-13-2011, 11:53 PM #1Senior Member
- Join Date
- Aug 2010
- Location
- bucolic south central mass
- Posts
- 245
Thanked: 35
what a revolting development this is...
this new photo posting system is confusing me. anyway, how do i fix this?
-
04-14-2011, 09:07 AM #2The Great & Powerful Oz
- Join Date
- May 2008
- Location
- Bodalla, NSW
- Posts
- 15,626
Thanked: 3749
Grind off most of the stabiliser & begin honing a new edge but that looks like a serious warp in the edge unless you've put weight near the centre with finger pressure..
The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.
-
04-14-2011, 01:14 PM #3Senior Member
- Join Date
- Aug 2010
- Location
- bucolic south central mass
- Posts
- 245
Thanked: 35
weight with the finger, that's exactly what i did. once i grind the stabiliser back a bit, how do i then hone the blade straight? i'd like to get that bump out of it. Rolling X? i don't care for the point on this razor and would like to dub it a little, round it a little. in spite of being a bengall, this was pretty cheap. has nice ebony scales.
-
04-14-2011, 01:42 PM #4Senior Member
- Join Date
- Nov 2005
- Posts
- 4,521
Thanked: 1636
You don't have to do rolling x no reason for it.
Originally Posted by Noisykids
Make your stone flat you could do straight strokes or x pattern . X pattern will be safe.
Don't use your finger to put pressure in any location of the blade. grab from the shank.
gl
-
04-14-2011, 06:32 PM #5Senior Member
- Join Date
- Aug 2010
- Location
- bucolic south central mass
- Posts
- 245
Thanked: 35
it had a slight frown i was trying to get rid of. i held it at a 45 degree angle and tried honing from the frown to the toe. things got worse rapidly. i don't mind if the profile of the blade gets changed. this is how a guy learns how to do this, i guess.
if you look just to the right of the frosty patch on the blade you can see the frown.
-
04-14-2011, 06:41 PM #6Senior Member
- Join Date
- Apr 2010
- Location
- Yakima, Wa
- Posts
- 1,955
Thanked: 494
Try this for straightening an edge. It works and is quick.
YouTube - VTS_01_1.VOB
Reply With Quote
04-15-2011, 01:22 AM
#7
- Join Date
- May 2008
- Location
- Bodalla, NSW
- Posts
- 15,626
Thanked: 3749
Thought so. Don't use finger pressure like that. You'll skew the edge . You need to grind the stabiliser back enough to clear it off the stone for honing & then some to allow for edge correction. You can freehand the edge like a knife till you have the profile you want & then work with the spine taped till you get a bevel. After that your choice with taping. Funny the spine doesn't look like it should have a frowning edge. Btw if it's an old Bengall the scales are most likely horn.
Here's some links to study. You have some work ahead of you but as you said it's all learning.
Correcting heels
Honing: Troubleshooting Guide - Straight Razor Place Wiki
The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.
