Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Like Tree16Likes

Thread: Contrary advise?

  1. #1
    Senior Member
    Join Date
    Sep 2011
    Posts
    224
    Thanked: 20

    Default Contrary advice?

    Gentlemen:
    I would like to start a discussion and hear opinions on something that, to me, seems to contradict one another.

    Common advice given to newbies (of which I still consider myself) is to buy a shave ready razor when the decision is made to take the plunge. I consider this sound advise, and having followed it myself feel that it has allowed me to successfully focus on developing proper technique without having to worry about the razor itself (until I screwed it up on the strop - but that is another thread!) In keeping said razor sharp, stropping and touch-ups with pastes and barber's hones is often asked about and discussed.

    Switch now to honing - The advice often given it to start with a 4k/8k combo and buy a finisher (12k or such) later when one feels comfortable with technique coming off the 8k.

    So here are my thoughts: If one buys a shave ready razor as his first razor, shouldn't the first hone aquired be the finisher? Assuming the edge isn't ruined by improper stropping (a pretty big assumption, I concede) wouldn't the first time a shave ready razor touches a hone be when it requires a "touch up" only? With a 12k finisher, the newbie can practice the full honing motion on a full sized stone and not a barber's hone. This would require a small amount of strokes per session as opposed to a full blown sharpening regimen, and if done properly, would prolong the life of the edge. When the time comes for the razor to be sharpened more extensively, numerous touch-ups on the 12k stone would have provided enough repetitions for the now not-so-newbie to be comfortable with honing and therefore want to purchase the lower grit stones to bevel set or what have you.


    As always, my assumptions may be flawed and my facts may be incorrect, so please fix those if needed (but that's why we're here, right?) Thanks to all for their help and insight.

    Gags
    Last edited by Joegags; 03-22-2012 at 03:06 PM. Reason: Spelling errors

  2. #2
    Customized Birnando's Avatar
    Join Date
    Feb 2010
    Location
    Oslo, Norway
    Posts
    5,079
    Thanked: 1694

    Default

    I'm sure there are lots of opinions on this, here's mine:

    The thing with the finisher only in your description is that when an edge is maintained on pastes for touch-ups, it tends to round off a bit.
    So, when the user finally reach the point where the pasted strop doesn't quite get the edge back, you really need more than a finisher to put it back.

    That's why the 4/8 combo is such a great and versatile tool.
    It can get you back from a rounded edge, it can be used to set a bevel and it can finish the razor quite admirably.

    Now, if one catches the edge before it falls off too much, then sure, a finisher will be able to put it back.
    A barber hone will be another very suitable tool for the user you are describing.
    That can, when used properly, keep an edge going indefinitely IMO.
    dave5225 likes this.
    Bjoernar
    Um, all of them, any of them that have been in front of me over all these years....


  3. #3
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    In principle I would agree with buying the 12k to begin with. OTOH, that is not what I did. I began with the norton starter set of the 220/1k, 4/8k and lapping plate. Shortly thereafter I added a shapton pro 12k. Anyway, I did not hone the shave ready razors I had bought from vendors. To learn I bought vintage razors in excellent or better condition to learn on. I always used 1 layer of electrical tape for the first year or so until I felt confident enough in my skills, that I wouldn't cause excessive wear at the spine, to do without the tape.

    Honing razors takes some learning of stroke, pressure, you eventually develop the muscle memory, but it takes a number of razors IMO. How long it takes, as with any learned skill, depends on the individual. Anyway, that is what I did. If you have one or two shave ready razors a 12k is good for touchups. Some guys will recommend a barber hone. I would say get one but get the 12k as well.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  4. #4
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    Before I ever found SRP I maintained 2 razors on a biweekly basis using only a Arkansas stone (a special one) for 20+ years I wish I had known about Barber's hones back then, could have saved mony

    What you are talking about is more than possible it is pretty much the way things were done for years.. The shaver maintained their razors, and brought it to a Cuttler (some were Barbers) for other fixes

    Is it good for you ??? I have no clue..

    You have to decide what you are after, but that is exactly how I started

    you might want to read this it is the latest version..

    http://straightrazorpalace.com/begin...tml#post750448
    Last edited by gssixgun; 03-22-2012 at 03:25 PM.
    twogun likes this.

  5. #5
    Just a guy with free time.
    Join Date
    Oct 2011
    Location
    Mid state Illinois
    Posts
    1,448
    Thanked: 247

    Default

    I've seen threads in both directions man. I've seen guys ask "what's the first stone I should buy?" and get advice of Nani12k, C12k, barber hone, etc. And I've seen guys who say "I want to hone! What should I buy?". Those in the latter usually get advised to go the Norton route, and hold off on a finisher until after they can shave off the 8k. I think the bottom line for it is that the senior members are trying to advise, dependant on the purpose of the user, while reminding us to go one step at a time. So if a person wants to hone, they get Nortons or something similar. While if they want to maintain their edges between send offs, they get a 12k or something higher.

    Hmm..looks like they beat me to it...lol

  6. #6
    Senior Member Cove5440's Avatar
    Join Date
    Jul 2009
    Location
    Brampton, Ontario
    Posts
    635
    Thanked: 121

    Default

    Quote Originally Posted by JimmyHAD View Post
    In principle I would agree with buying the 12k to begin with. OTOH, that is not what I did. I began with the norton starter set of the 220/1k, 4/8k and lapping plate. Shortly thereafter I added a shapton pro 12k. Anyway, I did not hone the shave ready razors I had bought from vendors. To learn I bought vintage razors in excellent or better condition to learn on. I always used 1 layer of electrical tape for the first year or so until I felt confident enough in my skills, that I wouldn't cause excessive wear at the spine, to do without the tape.

    Honing razors takes some learning of stroke, pressure, you eventually develop the muscle memory, but it takes a number of razors IMO. How long it takes, as with any learned skill, depends on the individual. Anyway, that is what I did. If you have one or two shave ready razors a 12k is good for touchups. Some guys will recommend a barber hone. I would say get one but get the 12k as well.
    I agree with Jimmy. Having a shave ready razor is essential, but having one to learn to hone on, that is not the one you are using consistently is also important in my opinion. I made the mistake of trying to fix up my main razor and almost quit straight razors because I couldn't get a comfortable shave. Then I picked up one off of the classifieds here that was shave ready and it brought me back to loving it again. Although I developed RAD immediately afterwards, but that is another story. LOL
    twogun likes this.

  7. #7
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,737
    Thanked: 5016
    Blog Entries
    4

    Default

    Yea Glen is right. Through the golden age of straights when it was the only way to shave the average Joe had 1 hone he used to keep the razor keen and if you asked him what the grit was he'd look at you like you were crazy. He just bought it from a barber or cutlery shop where it was sold as maint. for a razor. In those days there were plenty of places to go to get a razor professionally sharpened or repaired on the cheap and it was done right.

    The first hone I bought was the Norton 4/8 combo and later on added a Kitayama. After that...well...you know the story.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  8. #8
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    Yeah, one finishing hone is more than enough as long as you don't also use pasted strops which would round the bevel beyond what that hone can recover.
    The advantage of a norton is that it's more versatile, so you can recover from much more situations of making an error. My first experience was a touch up with something like 15-30 strokes on a 1"x4.5" thuringian. I had no idea what pressure etc to use, so I went with what I read 'as light s possible'. Having no experience whatsoever I thought the razor was not even touching the hone just gliding over the water, but to my amazement it magically worked like a charm and the razor was back to shaving like a dream (only because it was properly honed before).

  9. #9
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    A finisher makes sense if a person is to maintain a shave ready razor.
    However it has occured countless times, once a person starts to use SR, they become razor hoarders.
    Then most people want to hone their blades, and then just finisher will not cut it when it comes to fixing edges or bevel resets.
    In this latter case one has to use several stones in a progression.
    HNSB and Hirlau like this.
    Stefan

  10. #10
    Senior Member blabbermouth Kees's Avatar
    Join Date
    Jun 2006
    Location
    The Netherlands
    Posts
    5,474
    Thanked: 656

    Default

    A coticule with slurry stone is all you need. With slurry pretty fast, some people even reset bevels with coticule and heavy slurry. With little or no slurry much higher grit equivalent.
    Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •