Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree2Likes

Thread: Honing advise needed: 1 layer vs 2 layers of tape

  1. #1
    Senior Member
    Join Date
    Sep 2011
    Posts
    145
    Thanked: 23

    Default Honing advise needed: 1 layer vs 2 layers of tape

    Hi all,

    I tried to hone a dovo #300 with no luck. Below are some picture of the very blade.

    I got this blade from ebay and from the look of it has rather wide hone wear, it looks quite even across the blade but it has a slight smile. MMT confirmed this but shows rather poor heel contact on face of the blade.

    I tried to hone it the other night with mixed results depends on how many layers of tape I used. Btw, I only honed it on 1k to see if I could establish a bevel.

    With 2 layers of tape, bevel formed pretty quickly and passed TNT pretty well.

    Since I was thinking of using 1 layer of tape on all my razors to avoid confusion, I killed the edge and rehone with 1 layer of tape. I spent 45 minutes and could only get the toe and heel sharp, the belly just wouldn't get sharp.

    So I'm looking for a shed of light in this frustrating tunnel and hope some of you can help. my questions are:
    1. Do you try to use only 1 layer of tape on all your razors or am I just being OCD?
    2. Why did 2 layers of tape get the bevel up quite quickly but not with 1 layer?
    3. What did I do wrong?

    Thank you for your help.

    Cheers,
    Sy


    Click image for larger version. 

Name:	photo 1.jpg 
Views:	422 
Size:	27.1 KB 
ID:	101530Click image for larger version. 

Name:	photo 2.jpg 
Views:	411 
Size:	27.1 KB 
ID:	101531

  2. #2
    Eagle-eyed Zephyr's Avatar
    Join Date
    Jan 2011
    Location
    Slemmestad, Norway
    Posts
    1,535
    Thanked: 418

    Default

    I can't see the honewear in the pics, but to me it looks like it might have been breadknifed?If so you will need to remove a fair amount of metal to get the bevel back, Glen (Gssixgun) have some good videos on youtube to how to fix.If you also have a lot of honewear on the spine the honing angle will decrease even more, and more metal will need to be removed and you will usually get a quite wide bevel.To compensate if you don't want a very wide bevel you can use a extra layer of tape to increase the angle, with an increased angle less metal will also need to be removed.I have been lazy and used two layers of tape on two of my personal razors to compensate for large honewear, simply beacause I didn't want a huge bevel. They shave just as great as my others, and it's simply a cosmetic thing cause I'm a bit vain
    Need help or tutoring? Check out the  .

    Rune

  3. #3
    Senior Member
    Join Date
    Sep 2011
    Posts
    145
    Thanked: 23

    Default

    I think I'm as vain as you are when it comes to hone wear and wide bevel. Apologies for the bad photos, I couldn't get the angle right to show the wide bevel. I don't know whether it has been bk or just honed alot, but I agree it does look abit short judging from the rounded tip.

  4. #4
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Just did my father in laws Wostie and it had a a large amount of hone wear on the spine and a wide uneven bevel to the edge and a slight up swoop at the toe. I used two layers of tape on a 3000 stone set a new edge and then one layer on a 8000 stone. The new bevel is small and more even but the old one still shows. I'm guessing after more refreshes the wear of honing will slowly remove the original wide bevel. I can live with that as it shaves well now.

    Bob

  5. #5
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    Where are ya from gnoils? If you are anywhere around me, maybe I can help you out a bit. Sounds like you are using too much pressure. Try x strokes and the honing stone in your hand instead of on the table...this helps to show yourself how much pressure you are using.

    BobH:
    Two layers on 3K, then one layer on 8K? Must have taken a long time to get things right on the 8K. What I am saying, unless it's a typo, you did things backwards my friend and your 8K didn't even have a chance to polish the cutting edge, you just polished the side of the edge but not the cutting edge.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  6. #6
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    I dunno, looked at the edge with a magnifier and seemed polished to me. Then again being a raging noob I could easily be mistaken. Although the shave seemed OK.

    Bob

  7. #7
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    If you could get it to take an edge with two layers, it should take an edge with one or none (assuming no serious problems with the geometry). So if you're not getting there with less tape, you probably just need to put in more time honing it. That said, walk away as soon as you get frustrated and come back with a cool head later.

  8. The Following User Says Thank You to holli4pirating For This Useful Post:

    ZeroCool (07-19-2012)

  9. #8
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    I regularly get razors that have problems taking a fully set bevel right across the blade, usually due to a minor warp, with just one layer of tape. Giving more strokes at the tip and the heel and adding another layer of tape usually fixes things if the warp is not severe - the extra layer is just enough to lift the spine up a bit so that with sweeping rolling strokes the bevel gets set all along the blade. Works for me - might not work for someone else, but that's life.

    Regards,
    Neil

  10. #9
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    I normally find that the razors like this are more a case of uneven honing than being warped. The wear is typically significant into the spine and usually is not the same on either side. This razor has already lost at least 1/8 inch of width from whatever. One layer of tape will simply mimic the wear already on the razor and the bevel will continue to reflect the existing wear. Two layers will at least give you a working mini bevel. I would probably just repair the damage with circles, obviously with additional wear, but the bevel and edge would be corrected.

    Have fun.

  11. The Following User Says Thank You to Lynn For This Useful Post:

    mjsorkin (07-22-2012)

  12. #10
    Senior Member
    Join Date
    Sep 2011
    Posts
    145
    Thanked: 23

    Default

    Quote Originally Posted by Lynn View Post
    I normally find that the razors like this are more a case of uneven honing than being warped. The wear is typically significant into the spine and usually is not the same on either side. This razor has already lost at least 1/8 inch of width from whatever. One layer of tape will simply mimic the wear already on the razor and the bevel will continue to reflect the existing wear. Two layers will at least give you a working mini bevel. I would probably just repair the damage with circles, obviously with additional wear, but the bevel and edge would be corrected.

    Have fun.
    When you say repair the damage with circles, I'm getting the hint to not use tape. Is that correct?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •