Results 1 to 7 of 7
  1. #1
    Senior Member
    Join Date
    Sep 2006
    Posts
    142
    Thanked: 0

    Default advice ...green paste /belgian cocticule

    hello friend..... i don't want to spend other money for another strop with green paste....

    could i use to refresh my blade some lap in the belgian?? (or i wil pick up a swaty on ebay for 20$)

    thanks

  2. #2
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    If your coticule is in a good shape you could use it to refresh your blades. With that being said, mine was crappy but I got amazing edges from chromium oxide 0.5 micron abrasive powder mixed with strop dressing. About 25c worth was enough to give that final finish to 10 blades and there's still more than enough to refresh these edges for at least a year (by my free estimate). So far I've only tested 3 but they all gave me great ultra-close and very comfortable shaves.

  3. #3
    Vlad the Impaler LX_Emergency's Avatar
    Join Date
    Mar 2006
    Location
    Oss, the Netherlands
    Posts
    2,854
    Thanked: 223

    Default

    Works for my belgian. I use it for refreshing all the time.

  4. #4
    Senior Member
    Join Date
    Sep 2006
    Posts
    142
    Thanked: 0

    Default

    i have tried to pass the razor without wet the stone(belgian) for check the balance...i have applied no pressure....

    i have damaged the blade?

  5. #5
    Vlad the Impaler LX_Emergency's Avatar
    Join Date
    Mar 2006
    Location
    Oss, the Netherlands
    Posts
    2,854
    Thanked: 223

    Default

    Probably not.

    Here's what I do:

    1) get a small plate of water, your stone, some waterproof sandpaper and a piece of cloth to put the stone on.
    2) dip the stone into the water
    3) put the stone on the cloth yellow/white side up
    4) Sand the stone quickly with the sandpaper
    5) add a few extra drops of water to the grayish slurry that's now on top of the stone.
    6) Pull the razor, sharp towards the sharp en lying flat on the stone up and down in an X pattern flipping it over everytime.
    7) Make sure to put on quite a bit of pressure at first
    8) lessen the pressure slowly while honing
    Add water whenever the stone starts to get dry

    Finish up with 60 times up and down on the linen and 60 or more times up and down on the leather.

    now the amount of time you have to pull the blade up and down varies with each razor. But I do around 60 laps usually at least.

  6. #6
    Senior Member
    Join Date
    Sep 2006
    Posts
    142
    Thanked: 0

    Default

    thanks....could you explain me the sensation (when i shave) of the overhoned blade and the not properly sharp blade???

  7. #7
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    8,023
    Thanked: 2209
    Blog Entries
    1

    Default

    If the blade is not sharp enough it will pull or tug at your whiskers.
    If the blade is overhoned it will feel scratchy and harsh on your skin and will skip over some whiskers.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •