Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree3Likes

Thread: Naniwa SS 1k as a Bevel Setter, Or King?

  1. #1
    Senior Member jpcwon's Avatar
    Join Date
    Oct 2012
    Location
    Boston, MA
    Posts
    384
    Thanked: 45

    Default Naniwa SS 1k as a Bevel Setter, Or King?

    Hello SRP,

    So I'm venturing into the world of honing, and have acquired some "toys" to start out with:

    -Norton 4k/8k
    -DMT 120 for initial lapping
    -DMT 325 for more frequent lapping
    -A Chinese 12k for finish-honing,

    and a Naniwa SS 1k for Bevel-Setting. Now my question is; is the Naniwa really not recommended for bevel-setting on its own? I was going to go with a King 1k, but I got a REALLY good deal on the SS. My plan down the road is to acquire the rest of the Naniwa SS set, so I'll be able to use the 1k with those. But is it reasonable to use it with the rest of my existing setup, or is the King 1k that much better for bevel-setting?

    Thanks a lot for any input you may have!!

    John

  2. #2
    Senior Member 111Nathaniel's Avatar
    Join Date
    Jan 2011
    Location
    Newfoundland, Canada
    Posts
    266
    Thanked: 23

    Default

    I can only vote for King 1000 as that's what I got. And it works well for me. i will say there's nothing wrong with mixing brands, the nani should work fine with what you got. After all I only use a king 1k/4k and a coticule /bbw combo from there up.

    Edit: The 4000 grit can set bevels too, just a little slow. Wont hurt to take your time to decide.
    Last edited by 111Nathaniel; 10-27-2012 at 11:08 PM.

  3. #3
    Senior Member blabbermouth Theseus's Avatar
    Join Date
    Mar 2011
    Location
    Ohio
    Posts
    2,786
    Thanked: 421

    Default

    Any 1k will do the job. After that it comes down to personal preference. My personal preference is for the King.

  4. #4
    Senior Member jpcwon's Avatar
    Join Date
    Oct 2012
    Location
    Boston, MA
    Posts
    384
    Thanked: 45

    Default

    good to know; thx for the responses. I think I might pick up a King 1k after all, and save the Nani SS for when I get the whole set...

  5. #5
    Senior Member Wolfpack34's Avatar
    Join Date
    Apr 2011
    Location
    California
    Posts
    1,596
    Thanked: 865

    Default

    The Naniwa 1k is perfectly acceptable and works very well IMO. It is however slow...which is not a problem unless your 'in the business' or in a hurry. I also have a King 1200 Big Block that I use for just about everything. Both stones require frequent 'light lapping'. My usual routine is to set the bevel with the King (much faster cutter) and then 'smooth it out' with the Naniwa. That might seem contrary to some folks but it works very well for me...

    From there your Norton 4/8 will take it the rest of the way for shave ready and then the Chinese 12K for final finish.

  6. #6
    Senior Member Frameback's Avatar
    Join Date
    Jan 2012
    Location
    Gothenburg, SWEDEN
    Posts
    450
    Thanked: 38

    Default

    Real men use chosera 600

  7. #7
    Senior Member mjsorkin's Avatar
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    1,139
    Thanked: 173

    Default

    Great post on the subject:

    http://straightrazorpalace.com/hones...l-setting.html


    There is a video on the front page of Lynn setting a bevel on the Naniwa SS 1k. Hey, if it's good enough for Lynn.....

    Michael
    gssixgun likes this.

  8. #8
    Member
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    46
    Thanked: 3

    Default

    I've had trouble with the Naniwa, but the King works fine for me.

    In all fairness, if we gave Lynn a badly chipped razor and a piece of granite for a hone, he could probably get that thing shave ready.

    YMMV

    Quote Originally Posted by mjsorkin View Post
    Great post on the subject:

    http://straightrazorpalace.com/hones...l-setting.html


    There is a video on the front page of Lynn setting a bevel on the Naniwa SS 1k. Hey, if it's good enough for Lynn.....

    Michael

  9. #9
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    I really am not much fan of any of the King stones. Tested them ad nauseam and they never performed as well as others. The Naniwa SS 1K is really nice for bevel setting and will work well. When I am not using the Naniwa Chosera 1K, the Super Stone 1K is my fallback stone. Very consistent and nice feedback and results I can always count on.

    Have fun.
    mjsorkin and tiddle like this.

  10. #10
    Senior Member tiddle's Avatar
    Join Date
    May 2012
    Location
    Oxford, Al
    Posts
    1,605
    Thanked: 407

    Default

    Everyone says the SS is slow, compared to a chocera or the kings I am sure, but I have heard it is faster than the norton 1k. I really like my SS 1k, like lynn said it gives good feedback, doesn't get muddy and messy, and sets a bevel fairly quickly, but to me sets a smoother and more consistent bevel than the king. Just my $0.02. A buddy let me try his king and I didn't keep it but for one razor and went back to my SS.
    Mastering implies there is nothing more for you to learn of something... I prefer proficient enough to not totally screw it up.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •