Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree8Likes

Thread: Need some experienced advice - does this need honing?

  1. #1
    Senior Member Kaden101's Avatar
    Join Date
    Nov 2012
    Location
    Castleford, West Yorkshire, England
    Posts
    124
    Thanked: 11

    Default Need some experienced advice - does this need honing?

    Had my straight since December, & as my experience shaving with it has increased I find that I can get closer with multiple passes than ever before but also that it feels like it's tugging more, especially round the chin. It doesn't feel like it's tugging when I do my sideburns & cheeks, but I do tend to use the toe end of the blade for that (due to having ears probably) & use the central part of the blade more for the rest of my face. I really don't know if it's my technique, a blade that's not as sharp is at was when new, or a combination of the two. It is after all a distinct possibility that I've blunted the blade with my amateur stropping & shaving technique.

    I've got myself a Norton 4K/8K & a jewellers loupe. The norton is lapped, & the edges are rounded so I've got the basic equipment to hone, but lack the experience. I can't afford additional 1k or 12K hones just yet, so if/when I do this it's going to be just with the Norton for now. My issue is due to lack of experience, I'm looking through the loupe & can't really tell what I'm looking at, so I did the only decent thing I could think of & took some pictures. The yellow background is the Norton, & the silver thing at the bottom is the zippo I'm resting the loupe on.

    The 1st 4 pictures are from the toe to the heel of the left hand side. To my distinctly amateur eyes this side doesn't look that bad, but what do I know?

    Name:  LHS-1-toe.jpg
Views: 254
Size:  24.5 KB
    Name:  LHS-2-middle.jpg
Views: 247
Size:  25.3 KB
    Name:  LHS-3-middle.jpg
Views: 265
Size:  25.5 KB
    Name:  LHS-4-heel.jpg
Views: 252
Size:  32.5 KB

    The following are from the toe to the heel of the right hand side. I could be completely off base, but the bevel in the middle doesn't look as deep or as clean as the other side. Again, what do I know?

    Name:  RHS-1-toe.jpg
Views: 251
Size:  20.4 KB
    Name:  RHS-2-middle.jpg
Views: 255
Size:  22.1 KB
    Name:  RHS-3-middle.jpg
Views: 253
Size:  31.6 KB
    Name:  RHS-4-middle.jpg
Views: 238
Size:  33.0 KB
    Name:  RHS-5-middle.jpg
Views: 243
Size:  29.1 KB
    Name:  RHS-6-heel.jpg
Views: 244
Size:  25.3 KB

    I appreciate that these photos from a mobile phone won't be anywhere near as helpful as actually seeing the razor in the flesh & you might not be able to tell me much from these alone, but any advice is appreciated. I really don't know if I just just soldier on with improving my technique, or if it does need honing? The straight was bought from The Invisible Edge which came recommened on SRP, so I can be quite sure it was shave ready when I received it.

    Thanks for any help.
    AFDavis11 and m4dm4n like this.

  2. The Following User Says Thank You to Kaden101 For This Useful Post:

    AFDavis11 (02-08-2013)

  3. #2
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    Not enough magnification or clarity to tell. Take a sharpie and lightly run it on the edge from heel to toe. If you feel any, any snagging you have a chip or damaged edge.

    It is not unusual for a shaver new to straight razors to damage the edge while stropping. A properly honed edge is a very fragile thing. A sharpie should glide smoothly along the entire edge. If it does, proper stropping should bring it back.

    Unfortunately it does take some time to develop the muscle memory need to learn to strop properly, really is it a matter of pressure, too much can damage the edge and keeping the spine and edge flat on the strop. The condition of the strop is or can also be a factor. It should be clean and smooth.

  4. The Following User Says Thank You to Euclid440 For This Useful Post:

    Kaden101 (02-07-2013)

  5. #3
    Senior Member Kaden101's Avatar
    Join Date
    Nov 2012
    Location
    Castleford, West Yorkshire, England
    Posts
    124
    Thanked: 11

    Default

    Thanks for the reply. I think my stropping is better now, but I'm sure it was very subpar when I first got the razor, just like a lot of beginners. It wouldn't suprise me at all if I dulled the edge prematurely.

    I know there is a very tiny nick near the toe of the straight, noticed it a couple of weeks back, but it was still shaving fine, it actually looks worse to the naked eye than it does through the loupe & even then it's hard to notice unless you really look for it. You can definitely feel it using the TNT though & you can see it on the 1st picture above. It is still shaving at present, just feels a little snaggy at times, but not when I'm using the toe end of the blade where the nick is for my sideburns & cheeks.

    Other dumb question, what's a sharpie?

  6. #4
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    A sharpie is also known as a magic marker. It is useful for beginning honers in making sure the edge is making full contact with the hone. The ink will be removed if the stroke is correct , or it will remain if it doesn't contact the stone. I would recommend you try a light weight of the blade touch up on the 8k. Do 5 round trips and try the blade after stropping. If that doesn't get it do 5 more and strop and try shaving again. For me the loupe is to see chips or other problems with the edge. Not to tell if it is sharp enough. Your shave will tell you that.

  7. The Following User Says Thank You to JimmyHAD For This Useful Post:

    Kaden101 (02-07-2013)

  8. #5
    Senior Member Kaden101's Avatar
    Join Date
    Nov 2012
    Location
    Castleford, West Yorkshire, England
    Posts
    124
    Thanked: 11

    Default

    I've never heard of marker pens called Sharpies before. I'm sure I've got something around the house that will do the job nicely, if not I need to go get some electrical tape anyway. It's always the way when you need something, it's never where you forgot where you put it.

    I'll bear in mind the uses for the loupe & I'll try some light touch up on the 8K.

    Thanks for the time & info.

  9. #6
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    The fiber tip of the marker will test the edge without causing damage. If you do not have one, a piece of foam or cotton Q tip will work. If you feel a snag, the edge is damaged and need to at the least, be touched up on a finish hone.

    If you have good magnification look at the edge straight on, down on the edge. Any damage will appear as a shiny spot, reflecting light. A sharp edge will appear blurred grey.
    It is just a quick, easy test of an edge.

  10. The Following User Says Thank You to Euclid440 For This Useful Post:

    Kaden101 (02-07-2013)

  11. #7
    Senior Member Kaden101's Avatar
    Join Date
    Nov 2012
    Location
    Castleford, West Yorkshire, England
    Posts
    124
    Thanked: 11

    Default

    I followed JimmyHADs' advice & popped my honing cherry. I did a small number of light strokes on the 8K side of the Norton followed by 50 strokes both ways on the strop. Massive difference. The nick at the toe end no longer registers on the TNT, but more importantly the shaving quality was much improved. A lot less tugging than before, & the improvement gave me my best straight shave by a long way. I could tell immediately on the 1st pass how much better it was. It may still need a tiny bit more work on the hone, but good result so far.

    Thanks for the advice, much appreciated.
    JimmyHAD and ScottGoodman like this.

  12. #8
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Those pictures were fantastic. Everyone should absorb those pictures and take note of Jimmy's advice, which was right on the money. I think if guys could understand better when, and when not, to use the 4k, they'd be a lot better off.

    Quote Originally Posted by Kaden101 View Post
    I followed JimmyHADs' advice & popped my honing cherry. I did a small number of light strokes on the 8K side of the Norton followed by 50 strokes both ways on the strop. Massive difference. The nick at the toe end no longer registers on the TNT, but more importantly the shaving quality was much improved. A lot less tugging than before, & the improvement gave me my best straight shave by a long way. I could tell immediately on the 1st pass how much better it was. It may still need a tiny bit more work on the hone, but good result so far.

    Thanks for the advice, much appreciated.
    Kaden101 likes this.

  13. The Following User Says Thank You to AFDavis11 For This Useful Post:

    Kaden101 (02-08-2013)

  14. #9
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,251
    Thanked: 3222

    Default

    Congratulations on getting things sorted out and improving your shaving experience.

    Bob
    Life is a terminal illness in the end

  15. The Following User Says Thank You to BobH For This Useful Post:

    Kaden101 (02-08-2013)

  16. #10
    ace
    ace is offline
    Senior Member blabbermouth ace's Avatar
    Join Date
    Dec 2010
    Location
    Virginia
    Posts
    3,362
    Thanked: 581

    Default

    Just remember that as helpful as the TNT may be, running the edge across your fingernail does dull it a bit. A couple more passes on the 8K would relieve that. Then strop once again of course.

  17. The Following User Says Thank You to ace For This Useful Post:

    Kaden101 (02-08-2013)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •