Thread: Japan-razor shave that beard

so .. i found these pages, in Japanese, an illustrated guide to honing kamisori

to see pics, go to “ú–{’ä“� ‚‚ç‚ä‚«�@Šâ�è’ä“��@颒ä‚è‚̃y�[ƒW�@“u‚¬•û‚©‚çŽg—p–@‚Ü‚Å ::

following is a auto-translate by Chromium [Chrome on 64-bit Linux]

Japan-razor shave that beard

Introduction

　 New product competition is fierce razor had been impressed each time.
　 Buy let the body, others will follow if one company have a new product coming out of the Commercial Code is a role model to make money on the blades.
　 I was using the ones that are thick amorphous diamond coating. I think it is a good enough level of sharpness, mochi blade is the product of more than this is not needed anymore.
　On top of all that you are in doubt what would you buy alcohol cleaning also be interested in electric shavers, I have bought a razor Japan.
　This was also found that you do not think very interesting and so much fun to beard.
　It is something that can be a very fine taste.
　I Yuku helpful to introduce those who believe and those who are interested in razor razor and western Japan, and one more sharpness I'm using. I think there is also an opinion not finish off is difficult and wrong, good and these people, and are intended to shave the beard well easy to clean.
　I borrowed a little while I would like to recommend Yuku says秀是"Let us cheerfully will comfortably shave daily fun fun to imagine the day to spend Kokoroshite thank you."
Invitation to shave beard

　I find it's a haircut (barber shop) barber in its place of destination is really like, the difference in arm barber was well understood.
In particular, the difference is clearly understood that I shave beard.
I have only two people that felt that it was good.
　However, I think that the win is not a new chic diamond. (Do not lose it shave)
　is vulnerable to razor blade such expressions.
　New condition is that the sharpness fall each time you use. It is also that there is something that does not expire even among the products in the case, shall be cut off.
　This time, the aim with the razor Japan is that I used to be a state like sharpening using 2-3 times a diamond.
　Since sharpness recover every time sharpening, it is the level that can satisfy even picky people sharpness.
　In Japan, there are many weaknesses razor compared to the formula blade of course. However, there is a fun place to people who use its weakness is compensated.
　Buddhism was introduced along with the razor handed down. We are barbarians of the Far East, had a culture that the tonsure from before it.
　I think part of the fun also remember the spirit of the samurai Some of the genes that are built by the beard with a razor.
　There were reports that Mr. rocky has compared the Nippon razor shave and barber shop among the wide leather Saturday.
　difference of the sound is different beard with a razor is leather and Japan. Japanese razor blade was soft gentle things around.
　Feel comfortable, the sound reaches the eardrum shaving directly from their own skin and bones actually used.
Cautions 　goodness of sharpness is by far the county among the cutlery in the home. 　There is no stainless steel. Be careful to rust. Rust was 70% of the causes of the 1962 razor stainless steel is used will not expire. 　Wash after use, wipe with a dry cloth to completely well. It is also effective in the dryer blower. Can not fool steam rising from the human body. 　Condensation from the cutting edge thin strongly influenced by the thermal change, especially in winter. Small water droplets invisible rust the cutting edge. 　Is necessary to avoid cases that are effective insulation out of the reach of children which they are stored. 　Do not treat them roughly. I can not repair an individual cutting edge is absent. Japan razor is simple, it is one of the delicate and highly accurate tool among all blade.
　






Japanese manufacturers are making a razor

　Miki City, Hyogo Prefecture (Kiyotaka Ichihara) Tsurayuki
　　is the last craftsman to build a Japanese razor. Temporarily became the last person really. It is an endangered species. Than when it is scarce.
　　It is great to continue to defend to the end the Japanese culture.
　Sanjo, Niigata Prefecture (City Mizuochi good) Iwasaki
　　had saved the razor was almost disappeared Sanjo Mr. Shigeyoshi Iwasaki will not make the razor is Mizuochi Yoshi.
　　Kiya Kato, president of the knife has been introduced in the 2009 issue of 2006.4 magazine.
　　Kiya also owns a razor and Japan and only law Wenshu是excellent work.
　　Why I did not like the clear water made ​​the razor ball had made ​​a number of unusual cutout Mr. Shigeyoshi Iwasaki?
Paraphernalia



　

　

Finishing grindstone 1: Although there are natural and man-made things, I'd recommend something natural.
　　　　Has the advantage that it is difficult to crazy hard to drainage plane: that hard choice.
　　　　　　　　　Cutting edge crash partially caught in such large particles and particles is uneven: it is a fine and uniform particles constituting the grindstone.
　　　　　　　　　 　　　　　　　　　　　　　　　　　　　This is a fatal damage razor.
　　　　　　　　　I do not have to be without power: polishing.
　　　　　　　　　I think it is difficult to those who have never used a natural whetstone sharpening I do not know and do not in practice.
　　　　　　　　　I may ask the color and polishing force "with" do not care "that there is no hard and uneven fine particles for razor" to trust ya so grindstone.
　　　　　　　　　I think Mr. Tanaka and industrial grindstone grindstone me choose which worth the price. (Because asking too carpenter around me)
　　　　　　　　　do not need expensive grindstone.
　　　　　　　　　Things I tend to sharpen straight edge along the edge, so sharpen when I sharpen razor good for leather in size.

　There are only two manufacturers as above: 2 Japanese razor. Iwasaki's razor image

　White Mikawa Nagura: grindstone Nagura 3. Those of the cube is easy to use.

　I used to modify the surface of the grinding wheel Finish: grindstone of 4. I will not be directly hit a knife.
　　　　　　　　I need two or more together We'll release the sliding plane. We will use the four-sided Lapping is two and two sides.
　　　　　　　　I recommend No. 2000 Pink Imanishi grindstone. Make a plane together to the grindstone, I will modify the surface finish of the wheel.
　　　　　　　　Scratches to medium grade millstone and grindstone rough finish.
　　　　　　　　We will then be modified if there is no harder than finishing grindstone. 　　　　　　

　Razor back and turn left towards the cutting edge when you put it on the head table: 5 razor. (Inscription that have been pressed)
　and the table razor blade is facing towards the right when you put it on your head: 6 razor back. I (6.16 has been corrected)

Out the plane of the wheel in

　There is a ceramic whetstone that there is unevenness in the product.
　We want something more than two of the same hardness, see if you can align the same items of the shop.
　I'll put in the water medium grade millstone that you have purchased. Let me suck enough water.
　Because it is not just the horizontal grinding wheel has been bought, we plane soup by a sliding fit.
　I Yuku fit the grindstone while changing the front and back, up and down. I make a horizontal circular motion or a combination of up-and-down movement (7).
　The trick is that the contact surface is pressed with a uniform pressure is always the same.

that the plane has gone out in the village that lost the frictional force is engaged grindstone rub that I should be able to understand.
　Lapping is also completed in accordance with any part of the grinding wheel and the grinding wheel, if it is properly bonded. 　Is fitted with a medium grade millstone that this rub, I put the plane of the wheel finish. (8) 　finishing grindstone, the following is the same size as the medium grade millstone plane can be easily obtained. 　That the plane appears to rely on the sound of the grinding wheel grinding wheel and the friction force is engaged rubbed rubbing should know so well. 　Abrasive finishing out of the plane drops a particle of medium grade millstone Wash scrub brush or sponge.

Plane has not even come out Nagura grindstone just bought.
　Determine the aspect of a beautiful fully equipped cube if you put the plane on the medium grade millstone Lapping. (9)
　Wash grindstone Nagura which came out of the plane as well.
　Nagura, pour water over the surface of the wheel to finish.
　If there is not a plane curve with either loose finishing grinding wheel, grinding wheel Nagura, between the grinding wheel is no longer in effect sucker stick away.
　Put in the water without peeling force, when I let go little by this crowded.
　I bet you do to fix the plane Nakura.
　I spend the entire wheel surface finish Nagura to feel the surface of the grinding wheel abrasive finishing first put some force to Nakura. (10)
　Note that when you sharpen when you feel caught in the grinding stone Nakura is because there is a muscle there.
　I Yuku prepare the abrasive surface which was a medium grade millstone. I spend enough Nakura.
　We sharpen the razor using the abrasive surface smooth this over a Nagura prepare the abrasive surface smooth as ice riding smoothly without a force then. (11)

It is more and more abrasive technique, razor is made ​​to be easy abrasive technique. Technique is easy to abrasive than any other blade.
　The people who have written on the inscription, Masu Table abrasive technique. Guho abrasive is less susceptible to the abrasive surface parallel to the blade, with a good blade.
　As an aside, bladed people improve the quality of abrasive finishing is a stone pedestal than improve the quality of a good Nakura.
　In order to be dragged to the performance of the socle absolutely, this is not that good results can be obtained by using a good Nagura grindstone rough finish.
　Use a good Nakura who plan on further after he got a good finishing grindstone.


　

　I Yuku sharpening ice as if gliding smoothly without a green line force (12) to hit the uniform.
　 Rather than by cutting out the eyes to give the cutting edge with the knife and grindstone different knives, razor must sharpen to sharpen a straight line as obtained by continuous thin.
　I work in a small lowering in sharpening whetstone so shank and hit send too deep.
　I have certainly achieved without any black particles appear. Cutting edge is so delicate.
　I sharpen stop to observe the signs will not be able to sharpen the grinding wheel surface is smooth and dry.
　I have been reliably sharpen sharpen if one quartile. Do not however the plane of the grinding wheel must be sure to do so.
　Back technique is abrasive, this is difficult.
　I will be hardly affected by the wheel surface pressure of the wheel is subjected cutting edge so many ground area in the wash of the table is reduced, the ground contact area of the back is hardly
　even doctor abrasive, strong impact with abrasive and disconnect the power easily attached to the cutting edge eye received grindstone.
　The shape of the cutting edge is serrated cutting edge and with eyes grindstone. Had said, "It is desirable because the saw blade knife cut to draw," said Ichikawa had been field testing of female medical an aside.
　Story count is lower than you think in order to put a serrated blade, grinding wheel that has the best doctor ever will be replaced or if you'd like to talk to that doctor what kind of stone.
　Of putting a razor blade serrated, I still must be preceded by a straight blade without a continuous thin.
　Because, I do not only must make a beard without cutting the skin. It should be able to imagine grindstone needed to sharpen the razor how it will therefore.
　's Hair cut only to not cut the skin, the hair is not just because it is a projection.
　Thing does not turn off the required pressure as the analogy does not work if the wind willow.
　I do not hurt the skin, so the skin soft and distribute the pressure.

We hurt the skin without beard is because it takes a very high pressure to the cutting edge of the blade is serrated, however.
　We returned to the table to talk abrasive technique. Why, I'll try to think of the shape of the edge of the table or thin filaments.
　I feel that it is conceivable that different easy to take a back blade If you think simple, think that the barber is using abrasive skin I will.
　(I think to take the blade return and have the most sensible or even take the abrasive skin oil, etc. There are several theories and apply the abrasive skin ceased when cut.)
　that is considered the most, Shaving I think I can reduce the resistance.

　

　In the razor-edged properly, such as fine vellus hair is well cut. The thick hair is also the most difficult to cut.
　Cutting edge, but captures the hair properly, I hardly have become like shaving because the thickness of the wedge-shaped blade acts as a resistance force.
　As an aside, I think that's why it does not win in the razor sharp blade formula.
　The Razor's Edge formula is the very thin blade. Blade area exposed to skin contact at a time also widely because it is flexible. I admire and such are made ​​really good.
　To do so, the part that was edged with filamentous this is less than or equal to half of the thickness of a hair of thinking in order to reduce the resistance, and is in the form of filamentous I are appropriate for interest I think this effect can not be expected.
　In that I am using razor Unfortunately, there is no accuracy to there. (It might be because you are regrinding buff)
　, or there is no might have become a razor's Mizuochi and Ishihara because they finish a line this part, I examined since there is no actual no.
　Expression with a razor blade, I feel like I have to do this.
　Accuracy might be better to some extent re-comb it with a mechanical grinding machine grinding wheel finish, I is not common.
　I think I was in a solid blade with both sides, but is easy to use, here's a blade with a filiform to respect the intention of the author is good.
　Relax as much as possible, you should sharpen the grinding wheel to ride uniformly green line 13. Be careful because there is no place to occur partially achieved when the blade very thin thread. 　I will generate extreme pressure of the razor tip in contact with skin. Crush technique abrasive blade perpendicular to the cutting edge in medium grade millstone (○ 12 and 13).
　

　You may return blade razor has occurred to Ida abrasive. I returned the blade not just hurt the skin damaging the sharpness.

I took the blade gently back on a folded towel or towel.

Summary of abrasive technique

　I think you can see, the project to abrasive finishing planes made ​​of medium grade millstone, prepare the surface of the wheel finished in Nakura grindstone, make the surface smooth and uniform and dense, by the abrasive tool in terms of the razor, cutting edge By reflecting its dense surface, by reflecting on the face by its smooth surface and dense beard shave, after shave face is shiny smooth and silky.
　Smooth and smooth face of the cutting edge of the wheel will be the same and smooth.
　You can shave without per tooth gently, tingling, is razor blade in the expression is not obtained.
　Resurrected by a short period of time sharpening sharpness every time.
　You often hear or abrasive technique once crowded million to Zaregoto of an expert, such as in abrasive amateur casual talk, to increase the threshold, the abrasive tool that comes out to anyone even if you hold down the base. (Cutlery are those who rely on the medium grade millstone that it is difficult, I think it's easy if you just hit the grindstone finish)
　Please ask for regrinding to Togiya that when you are missing, such as relying on medium grade millstone can trust.
　Also, please fix this also liked by Togiya is low in the table favorite.

Shave

　Good barber is easy to create a state beard always bother.
　Rub out the beard, it is also effective to soften the skin, reducing the probability of damage to the skin.
　Taste varies greatly by shaving shaving cream or soap as a lubricant. (In the formula blade is. We had to put a thing to be smoother)
　Please have aged as much as possible. "answer when asked how to use before using a razor around the skin becomes soft. was ".
　Maybe, but I think that through the use of microscopic irregularities that remains cutting edge and lay the blade, may be due to the fact that the smaller the apparent shape.
　However, because there is a peculiarity in the way of the beard and the unevenness of the face fly, in the hunting field, you must also be able to capture the beard is well used in stand lay the blade harder.
　Does not move off the beard is lost to resistance, in order to capture that beard off, I must be at an angle that beard does not move.
　A thick dark beard density generates a strong resistance. Does not deviate from the Sioux, go little by little shave.

Afterword

　For doubt there.
　Any times when the cutting edge angle technique has been increasingly abrasive to the surface is very thin soup.
　Cutting edge is of one arrow is not a metaphor for the three arrows of Mori.
　When confronted by a swarm of cutting edge thin dark beard, I think for the pressure on the cutting edge.
　I work with the action reaction. To counter the line against said surface is hard work even for the hard steel.
　Cutlery sweet (low hardness) is changing its shape bent strongly influenced by the reaction.
　If you have enough cutlery hardness is low, I will not be able to tell the direction you want to turn off the power of big bend.
　Hard edge, the force is transmitted to the direct without Ru song because its hardness. I would break the limit is reached.
　Is said to be easy to sharpen not bend without breaking as a condition of good cutlery.
　And there is no doubt it, but I cut low hardness of the blade.
　Although cutlery or place any returns or arranging the organization of the steel and should not finish with the blade, and this is not to say there is a veritable well-made cutlery for the organization.
　Knife edged by issuing a grinding wheel surface without eyes I must withstand the forces that are applied to sharpen the blade.
　Is different from the user-friendliness and easy-with abrasive techniques, and blade.
　I do not often give as good cutlery to the metal structure of low hardness that is good over the back, long and easy to slice technique also abrasive blacksmith.
　I struggled to put the blade can be hard tricks abrasive abrasive actually see doctor. Do have to unplug the power to put an abrasive grinding wheel comes from medium grade millstone will not work.
　The blade is bent and succumbed to the pressure of the grinding wheel is no blade is Tsuka.
　The razor blade must not be spilled and still thinner steel extend, you can understand the respect that you get a good metal structure.
　There are in fact valid for blade to spill the organization you spheroidized, I'm not cut equal.
　I will not spill the blade and been told exactly without losing the ability to cut and try. With a blade that good in a short time, even if there is also some difficulty abrasive technique.
　This is the condition of a doubt there is this cutlery. (It is a sense of me)
　there was somewhere words that Shigeru是"said the hit and I Do not extend such extended but hit blacksmith of the region and extending extending steel", believed to be the truth this word I would like to.
　I want to believe that the spirit of the blacksmith forge believe that can withstand without breaking if three arrows.

It is undoubted favorite there is not a razor. 2006.7.12 (brewed chasing two dimensions)

　

　Small tricks

　One of the tricks that I think this is such a good recently.　
　(Put) Transfer the soap to the cutting edge of the razor blade in a manner that takes the return on the soap
　feel that deviate smoothly as Smoother and shave in this state, I will.
　I like it somehow although this is not durable. 2006.7.14

　I think that

　I think also to cut really should Katakere a little more every time you shave every day, easy to remember the feeling ghastly cold to the skin and the timing is right,
　the cutting edge of leisure much thought to the cutting edge still has the razor is good I think.
　Sharpness does not have any complaints alright, it comes Tsurayuki.
　Iwasaki razor's previous work I had cut out.
　This cut-out is something that I bought because I had to thank ridiculed at every lunch break to find that the plane was A~tsu Wakui's placing.
　In the story of the father of another tool shop, I was told my son and I do not have any merit Mr. Kosuke Iwasaki, there were achievements, however is pretty good. (Which is expensive)
　molding and building, but is not necessarily a good variety of cut-out design, I have learned many things as cutlery.



　(Bullion on the chisel is very good), but it is hard or thick steel abrasive technique, the entire surface is not unlike the razor back also hit the grindstone, and I is not even necessarily blade retention bullion is much better I will not be broken or chipped or cutting edge well.
　Have often forge welding wire and steel ingots.
　Line forge welding is also can appear clearly cause a bad forge welding it by forge welding at low temperatures, in the carpenter's tool Although the evidence was forge welding at low temperatures with dark spots-shaped sesame,
　Rather Apparently, there is a way to give well I think it.
　Put iron powder extra in the components of the material forge welding, tools that appeared strong line forge welding seen in tools Some Will not there are many tools which looks like was forge welding at low temperatures.
　I think not I recognize many times did you actually forge welding.
　There is also a tool to forge welding material is interesting and has a similar Iwasaki forge welding in tool that I have, in various ones own blacksmith.
　Well cut instrument of such a person.
　It is no secret in the mystery I look around in bare metal steel is beyond the line of forge welding real strange.　

　For gold plate

　The act of pressing the back or just a carpenter's what I do not know a thing common to the people involved in abrasive technology dealing with the back of a knife.
　But I want the act of pressing the back of the blade to a very mild steel and gold plate, called a carpenter.
　By sharpening the back is I am (male or male) without pressing.
　This act of pressing many craftsmen have experienced carpenter if maybe. No distortion backing accuracy as direct and Sheng old man page of the tool is pressed for some reason, it also pushes desperately.
　It seems like outrageous conduct any stretch of the imagination.
　I do not know who began to be the way that I think we would not necessarily know that from the time when certain customs.
　I might prefer to think that there was a meaning that has been lost in the act of pressing the gold plate be better.
　Sharpening the blade pushed back. I think it's very strange.
　I pressed on the gold plate of the wheel because accuracy does not pass a bad meaning. It is not considered the accuracy of the grinding wheel and the old carpenter was bad, I can not say with accuracy better gold plate.
　Tool in the book, which is written to move the particles of the wheel by applying a grindstone to gold plate (pierced) and sprinkle with the emery or use, in which it will be just like the one that was used the grindstone.
　Called, such as 8000 or # 1000 medium grade millstone in the fastest finish of the wheel.
　It seems to have divided Arato, and finishing with abrasive medium grade millstone in the particle size of the wheel, and I think the fine is determined by the roughness and unevenness of the wheel surface overall.
　Those who think they could keep the wheels of the Tiny abrasive surface is flat with no irregularities looks good.



　I'll put a picture of the gold plate once. (The plane does not come out too well just buy gold plate,. Is very people who were out in plane hone is good)
　but I can not force the abrasive expected in gold plate. Plane is a plane can be expected.
　As I wrote in the way of razor sharpener, sharpening plane made ​​back in the grindstone and finished shooting a medium grade millstone has nothing to do with the state of the wheel surface striations.
　I think when you press the back, and thing to flat gold plate with the help of the state of this wheel surface.
　Indeed, I think that the "press" is similar to placing a roller on the pavement.
　I think that it is somehow not transmitted to the first meaning, sharpening the back of the wheel to put the particles is done to gold plate, this is now being conveyed to.
　In other words, things that in order to form the shape of the back hone, was finished by pressing the back in gold plate, gold plate finish edged down at. I think it is not there had changed to.
　You can not expect to force abrasive gold plate, crazy mild steel because it is very easy to turn face.
　So, when you press the back desperately, backing is completed is horrible to see.
　Because I lived in harsh apprenticeship carpenter barber also, I would not is has it under the same mistake repeatedly Tsutawa~tsu If a single mistake by downward communication. 　Gold plate and the plate surface is roughened plane in medium grade millstone rust out quickly. I press the back from rubbing in turn prepare the surface again Nakura. 　Press the number plane without sharpening. (The cutting edge to the caution, use the presser bar if necessary. Was sewing as needle five fingers I also push so focused) 　I also dense even without a gold plate Effect of Pressing the grindstone in the back also by taking advantage of the abrasive grinding wheel with less force can be obtained. 　I think the correct thing to leave in the form of ancient wisdom is that it is culture. Watched the last Potter吉first eighty Tokuda 2006.10.8
　

Recent razor

　Recently, I found out that the reason there is bleeding in shaving.
　Lacked the cutting edge appears to have taken to go trick abrasive things like countless round nest in the back of the eye abrasive liked to use my razor.
　I get through to reduce abrasive technique if one or two, I exist as a mass group.

　

　Do Yuku mainly abrasive so the table as shown in the figure on the left, as I came to the cutting edge (I think rust or bubbles) things that exist in the back focal lacked the cutting edge appearance.
　Can not be found with the naked eye this is due to the presence in the eyes of the plow plow back, I was surprised that there a lot of nothing and viewed under a microscope or magnifying glass.
　Because on the surface, but I like the cutting edge does not appear in the eye but there is also a plow on the front side, of course.
　As a countermeasure, as shown in the diagram on the left, we decided to move to the front of the razor blade in the vertices of the abrasive technique that advance back. (There is no way back yarn is precious)
　, so long-awaited opportunity, but I've tried many things or try to press the gold plate to the table, I was not a good result can be obtained.
　To efficiently back down can be used in the sense of the grinding wheel is finished Shaputon No. 5000. Attention is required to the deviation of the plane of the abrasive surface a little so soft, woven well, what I was easy to put the finishing abrasive.
　Coarse particles are not digests, things did not get good results to be the same manufacturer No. 12000 I like the strategy to increase the count of apparent increasing the binding force of the abrasive surface also.
　I'm not in possession of 8000, but is in between. (I think this, and very good, so suffice No. 5000)
　razor which does not come out of tune is not only not fit, I was the worst face is tingling. Texture of the skin is also rustling after.
　It's not interesting, I was back in good condition over the finishing grindstone take some time. Is, push the back of the gold plate will somehow feel that is a little more.
　Get a better razor sharpness that good or bad physical condition is noticeable, so you do not pull a cold, I'll frequently see, the hassle tightly so as not to Ita-sa injury.
　It is a good tool that allows you to grow by continued use. 2006.10.23

　斎 razor consistency

　I got a razor naive at the time.
　Because with a blade, I was very concerned about what was being sold with a razor blade how much of the time.
　Cutter blade like that could be good to check with a loupe and I actually had been put.
　If so you can easily play blade of this degree, looking squeezed from the side of the blade with the nail, I had become confined to curved cutter and squash as 100 yen shop.
　Now that you have each piece I tried to hit the grindstone trying to fix the abrasive technique oyster with a steel or really rather sweet, I re-hit from medium grade millstone.
　Since the finish polishing addition, multiplication tables in abrasive technology in the habit sweet, a steel or perhaps all this? I thought.
　I can imagine would're sweet to prevent hardening crack razor thin if steel, all to discover the line forge welding in a razor-edged taken to go trick abrasive, steel bill also in, I was disappointed at the low level.