Results 11 to 20 of 22
Thread: Happy to have found SRP!
-
07-08-2014, 11:33 PM #11
Contact Crouton976 via the PM section. He is a lathering demon. Tell him I said so. A good source for straight shaving info. I'm sure he will be willing to share knowledge with you, that's the nature of this forum.
"The sharpening stones from time to time provide officers with gasoline."
-
07-09-2014, 03:02 AM #12
If you are using a shaving cream you can lather it directly on your face or in a bowl.
If you are using a shaving soap (hard puck) then you usually need a bowl.
That being said, I've made lather from a hard puck in hand and wiped it onto my face with the other hand. It was real messy and definitely put the wet in wet shaving.
You can pick up a VDH starter bowl, boar brush, and soap kit at Walgreens, CVS, Walmart, etc. for about $15. It lathers up pretty easy and shaves well.Some people never go crazy. What truly horrible lives they must lead - Charles Bukowski
-
07-14-2014, 03:05 AM #13
RazorCut, first I'd like to say a warm welcome to SRP! As I'm sure you're learning, the guys (and few gals) we have here are truly the cream of the crop and are definitely willing to help if you start having any issues.
Also, I did get your PM, but if it's alright with you, I'll respond here so that more of the new guys besides yourself can maybe learn something.
Also, thank you to Pope Razorfeld for the vote of confidence! That means a lot to me, good sir!
Okay, so as others have said before me, it sounds like you've pretty much hit the sweet spot in terms of your gear, but as some have pointed out, if you make the switch to a straight razor, there will be a slight learning curve coming off of the shavette. Not bad, mind you, just slight. Your soaps/creams are good quality, and your brush has a good reputation (I'm still using my cheap $5 Van der Hagen Boar brushes, and the Van der Hagen Badger brush that came with my starter kit, along with a vintage Eveready Boar brush... One day, I'll get a "real" brush, but can do just fine with what I have now).
From the sounds of your PM, you're two shaves in, using a combo of Proraso soap and C.O. Bigelow cream(which is actually Proraso cream rebranded) with glycerine to make an uberlather. I personally love the Proraso/Bigelow cream, as it gives a slick and dense lather. You can't go wrong with this one.
As for doing an uberlather, feel free to keep trying it, but I'd actually recommend starting with just the Bigelow cream or just the Proraso soap for now. I'd even leave the glycerine out, and probably start with the cream. The reason is that you essentially have about 7 variables when doing an uberlather (soap, cream, glycerine, water, brush, bowl, technique/experience) as opposed to 5 using just a soap or cream (soap or cream alone, water, brush, bowl, technique/experience). Controlling the variables and mastering them before getting into advanced aspects means an easier learning curve for you. The other reason I'd recommend the cream is that they tend to be easier to lather well, especially for new users.
Another thing to point out here is practice and practice, and then practice some more! The good thing about learning to lather well is that you can do it between shaves without wasting too much soap. On that note, as you go further into things, you'll find that each soap has it's own set of quirks and nuances to learn to get the lather you're looking for. Take a look at a thread I started called "The Great Common Soap Experiment!". You'll see that I went through 6 or so soaps/creams that I found in the wild at local grocery and drug stores. I kinda broke down each one and described some of the variables of each to get good lather.
As for your bowl/mug/face lathering questions, it's definitely easier to control in a bowl/mug (with the possible exception of a shave soap stick, like Arko or Palmolive, which is a different animal altogether). You can start with a relatively dry brush (after soaking, shake or squeeze most of the water out) and add a few drops of water at a time until you have just the right consistency you're looking for. Also, you were correct in mugs/bowls with ridges adding a bit more air to the lather, which if your water and soap amounts are right, means it will lather faster and easier.
Apart from a shave ready razor, which yours being a shavette eliminates that variable, your prep/lather is the most important aspect. A sharp blade and proper lather can be very forgiving to improper technique and pressure when learning.
One more thing... The toughest nut for me to crack, soap-wise, was Williams Mug Soap. I tried everything I could think of and couldn't get it to lather well. At about $1.50 a puck, I decided that I was going to make it lather well, and spent some time with my brush and bowl, loading, lathering, rinsing and repeating until I finally gave up. One day, I happened to come across a thread giving detailed info on how to get Williams to work well. The advice was totally counter to everything I knew about building lather, but by golly, it worked. That was only possible because of the awesome members here, who share their knowledge and experience so freely. As such, feel free to ask any questions you have because we love to help each other here. Additionally, since you're in the Atlanta area, I'd be more than happy to meet up some time and give you some in-person pointers. I'm not the most knowledgeable member here, far from it, but certainly don't mind showing you what I do know. We just moved to Paulding County, but I'm sure we could figure out something in terms of where to meet. As has already been said, meeting and learning in person for an hour or so will gain you the knowledge and experience of hundreds of hours of forum/YouTube time. If you're interested, just let me know.
Again, welcome to SRP, and if I, or any of us, may be of service, just ask.Last edited by crouton976; 07-14-2014 at 03:10 AM.
"Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead
-
The Following User Says Thank You to crouton976 For This Useful Post:
Razorfeld (07-14-2014)
-
07-14-2014, 11:17 PM #14
Crouton976,
Thanks for all the good feedback fella.
As you pointed out above yes I am two shaves in, this evening will be #3.
Regarding the uberlather vs a simpler mix that's just what I did. Meaning on my second shave, I used only the Proraso Soap without the cream or glycerin. Tonight I intend to flip that and use only the cream with no soap or glycerin then reflect on the differences of all three.
In reference to your thread on The Great Common Soap Experiment!, I will definitely be looking that one up after this post. Also I'm going to search for something to sample having a textured interior mug/bowl aspect based on your feedback above.
Lastly, I would like very much to take you up on your gracious offer to meet. I live north off of 400, I'll PM you to work out the specifics of where we can meet between us.
Thanks again!Insert witty statement here, T.B.D.
-
07-14-2014, 11:45 PM #15
RazorCut, Crouton has a bowl I modified. See if he can have it with him to show you if you don't meet at his place. Simple to modify a bowl. Loctite quickset epoxy - dual tubes, you attach a mixing spout and apply a series of dots to the bottom and lines radiating up on the inner sides. Let set a good 30 hours and enjoy a lot of lather.
Have a good mini meet!"The sharpening stones from time to time provide officers with gasoline."
-
The Following User Says Thank You to Razorfeld For This Useful Post:
RazorCut (07-15-2014)
-
07-15-2014, 12:11 AM #16
Razorfeld makes an excellent lathering bowl.
Going to use mine again tonight with the sample of soap Ed sent me!
It's got some nice ridges on the inside of the bowl that are just perfect for getting a good thick lather, I find myself using it all the time when I need a bowl for a soap sample of cream.
-
07-15-2014, 01:12 AM #17
I have to agree with Phrank on Razorfeld's bowls... hands down the easiest for me to lather in (and also, many thanks for the new addition and the housewarming gift, Richard! The new version is even more perfect than the original!).
RazorCut, I got your PM, so expect a response here shortly. I'm definitely down for a "mini meet", and if I was smart, I'd try to organize a full on meet, at least for all of the Georgian's! I know WillN and DonR are in Georgia (DonR is actually in a neighborhood around the corner from the house we just moved out of). I know there are more...
Anyway, I'll definitely bring an example of Pope Razorfeld's fine work for you to see, as well as some specimens of various soaps/creams, razors, strops, etc.
I'm also going to bring a stick of Arko soap and a twist up container that if you like the scent, you can have. I personally love the scent, but some folks don't. On top of that, it's a cheap, good quality soap... In fact, I only kept out the stick I'm using to shave with while all my gear was packed up during our recent move (still unpacking boxes, sigh). I'm also going to bring a puck of Williams Mug Soap, because if you can successfully lather that, you can handle just about anything! I don't know that I'd try shaving with it just yet since you're still learning your angles and technique, but just to practice lathering to get the same consistency as some of the better soaps out there it should do you fine.
PM incoming... Stay tuned."Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead
-
07-15-2014, 02:09 AM #18
How can I not 'like' the previous two posts. But, in my defense, anyone can construct an effective lathering bowl. And a number have posted their versions. So all I can do as Pope Razorfeld is issue a blanket Blessing of the Lather and wish you all nick free shaves (at least for the foreseeable future).
"The sharpening stones from time to time provide officers with gasoline."
-
07-15-2014, 12:49 PM #19
Razorfeld any chance of some pics of the bowl so us hsndy folk can give it a shot. Thanks
My wife calls me......... Can you just use Ed
-
07-15-2014, 01:26 PM #20