Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree18Likes

Thread: I Am A Newbee....

  1. #1
    Aspiring Shaver gflight's Avatar
    Join Date
    Sep 2015
    Location
    Central Missouri
    Posts
    364
    Thanked: 28

    Default I Am A Newbee....

    Good day all!

    I have used an electric razor most of my shaving life (a few decades) and went to a Double Edge razor and wet shaving two weeks ago yesterday.

    My ultimate goal is to go to a Straight Razor but wanted to ease in slowly.

    I am now starting to get comfortable and enjoying the ritual and comfort associated with wet shaving.

    I found the beginner guide very useful and decided to join for more info and maybe the classifieds as I become ready.

    The one question I have since I sharpen my own pocket knives is the process pretty much the same for the thinner blades?

    Gerald

  2. #2
    Senior Member blabbermouth Leatherstockiings's Avatar
    Join Date
    Apr 2013
    Location
    Rural Missouri
    Posts
    4,981
    Thanked: 972

    Default

    Hello, Gerald. Welcome to Straight Razor Place!

    The short answer to your question is no. There are differences between sharpening a pocket knife and a straight razor.
    rhensley and engine46 like this.

  3. #3
    Senior Member
    Join Date
    Jul 2015
    Location
    Helmetta, NJ
    Posts
    439
    Thanked: 56

    Default

    Welcome!

    Starting with a DE is a good way to transition to straights. You learn about shave angle, how to build a lather with brush and cream/soap, and proper pressure. It's the route I took and not having to think about everything while shaving with the straight the first several times was a blessing.

    I don't know much about sharpening knives, but I understand they are held at an angle to the stone. Razors need a finer edge and are laid flat on the stone. Also, higher grits are typically used for razors than knives. There may be more, so someone else may chime in with further details.
    gflight likes this.

  4. #4
    Aspiring Shaver gflight's Avatar
    Join Date
    Sep 2015
    Location
    Central Missouri
    Posts
    364
    Thanked: 28

    Default

    Thanks,

    I have bunch of different whetstones and was hoping to get by as cheap as possible. Should have known better and guess I did deep down.

    I also had an old gem micromatic Single Edge I was going to start with and found it had a spur where the blade was supposed to seat and the blade wouldn't sit right.

    So I bought a kit with a Badger hair and Merkur 34 Double Edge and I am liking it, shave is close and no pulling, even if I let it go for a couple days.

    I think I want to go to a straight but am going to research and wait at least a month before I pull the trigger.

    I guess I should resign to the fact that this will be like reloading, cheaper to do but your always buying new equipment and gadgets and shooting more....
    "When defeat comes, accept it as a signal that your plans are not sound,
    rebuild those plans, and set sail once more toward your coveted goal."

  5. #5
    Senior Member blabbermouth Leatherstockiings's Avatar
    Join Date
    Apr 2013
    Location
    Rural Missouri
    Posts
    4,981
    Thanked: 972

    Default

    A frequent recommendation to folks starting out is to have their razors pro-honed. Using a straight razor has a bit of a learning curve and it complicates things if you are trying to learn to hone on top of learning to strop, lather, and straight shave. Luckily, you are in Missouri which is a center for straight razor honers. There are two honers in the SRP classifieds based in MO.
    eddy79, Raol, rhensley and 2 others like this.

  6. #6
    Senior Member blabbermouth eddy79's Avatar
    Join Date
    Feb 2013
    Location
    Gosnells Perth Western Australia
    Posts
    7,041
    Thanked: 656

    Default

    Hi and welcome. Starting with a pre honed shave ready razor and using it for a few months will give you a real idea of what shave ready truly means. After that learning on a second razor is made easier as you know what to aim for and have had the time to do enough research to know what to do. If you can meet with someone local to show you the ropes then that would dramatically reduce the learning curve. Good luck and any questions feel free to ask
    My wife calls me......... Can you just use Ed

  7. #7
    Member
    Join Date
    Mar 2015
    Location
    Northern VA/ DC area
    Posts
    36
    Thanked: 4

    Default

    As said before, there is nothing like a shave ready razor. Send it out and it will be well worth it; I've had my latest one since march and it still has a great edge. Do not think that it will require frequent touch-ups on the stones. Proper stropping should keep it in good shape.
    gflight likes this.

  8. #8
    Aspiring Shaver gflight's Avatar
    Join Date
    Sep 2015
    Location
    Central Missouri
    Posts
    364
    Thanked: 28

    Default

    Thanks for the input. Seems like very good advice to not worry about sharpening until later.
    "When defeat comes, accept it as a signal that your plans are not sound,
    rebuild those plans, and set sail once more toward your coveted goal."

  9. #9
    Senior Member
    Join Date
    Jul 2015
    Location
    Helmetta, NJ
    Posts
    439
    Thanked: 56

    Default

    This can be done with a single investment. If you check out Straight Razor Designs, you can pick a razor/strop combo where the strop is heavily discounted. Consider upgrading to a 3" strop which makes it easier. Some chrome oxide paste on the inside of the fabric for a weekly touch up, and you'll rarely need to send the blade out to be rehoned. Then your only ongoing expense is shave cream and whatever other products you choose to use.

    That said, most people end up collecting one thing or another, if not everything, so it can get expensive. But it is possible. Sticking to one razor while you get your technique down will help, too.
    gflight likes this.

  10. #10
    Senior Member blabbermouth engine46's Avatar
    Join Date
    Feb 2014
    Location
    Republic of Texas
    Posts
    7,810
    Thanked: 1744
    Blog Entries
    2

    Default

    Hi & welcome to SRP. Since you have already seen the Beginners Guide, here's a couple links that might interest you:

    First straight razor shave - Straight Razor Place Library

    http://straightrazorpalace.com/begin...icipation.html

    As you can see there is a lot of knowledge here so just keep on going from the Beginners Guide.
    Any questions, just ask.
    Oh, BTW, Straight Razor Designs has good deals on a straight razor & strop set. The Ralf Aust with strop is a quality straight razor plus you have the option to upgrade to a better strop if it fits your budget. Lynn, the owner of this forum is also an owner of SRD & he personally hones & strops each new straight before it goes to its new home plus you get a free honing for when it needs it. Just look 'em up on the internet or you might see their ad on here & you can just click on it, then click on straight razor & strop sets. You can also practice stropping with a butter knife so you don't cut a new strop up which many of us did when we first started. You can usually sand it out or glue it back down with super glue (CA) or some rubber cement.
    Good luck my friend.
    Last edited by engine46; 09-14-2015 at 11:22 PM.
    criswilson10 and gflight like this.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •