Results 1 to 10 of 42
Thread: Greetings From Canada
Hybrid View
-
03-02-2019, 12:21 PM #1
- Join Date
- Feb 2019
- Location
- Toronto, Canada
- Posts
- 19
Thanked: 0Yup, I didn't touch it. I wanted a properly honed razor so I knew what it should perform like. I have 2 others on the way so one of them will be the one I hone myself. I don't suck with a knife on a stone/strop but I understand knives are far different than razors
I think a lot of people have very high expectations about how good a shave with a straight razor will be when starting out. The shaves can be excellent but it takes about 3 months of shaving every day with a straight razor to gain a decent level of proficiency with one in order to get that decent shave. It is a steep and longer learning curve than most had thought, myself included. When you start to learn to hone your own it is more of the same. Been there also and all of that was made even worse as I was self taught with no mentor anywhere near where I live to give one on one tutoring.
-
03-02-2019, 12:28 PM #2
- Join Date
- Feb 2018
- Location
- Manotick, Ontario, Canada
- Posts
- 2,775
Thanked: 552You may have already read this article on your first straight razor shave from the Library, but it offers very good advice.
https://shavelibrary.com/w/First_straight_razor_shave
Take it SLOW. Maybe just begin by shaving the easiest parts of your face - the cheeks. And do not neglect the prep, it’s a major part of the zen-like routine that makes the whole experience pleasurable.David
“Shared sorrow is lessened, shared joy is increased”
― Spider Robinson, Callahan's Crosstime Saloon
-
03-02-2019, 01:25 PM #3
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,251
Thanked: 3222That is good that you did not touch it so the tugging is down to beginner shaving and or lathering technique which is quite normal even with a shave ready razor. Yes, honing a straight razor is similar to sharpening a knife or wood working tool but different at the same time. You'll notice the difference when you hone your first razor so it will be no surprise to you as you are expecting that.
Since you did better on the first shave than your expectations you seem to off to a good start. It will only get better from there.
BobLife is a terminal illness in the end
-
03-02-2019, 01:46 PM #4
- Join Date
- Aug 2013
- Location
- Orangeville, Ontario
- Posts
- 8,391
- Blog Entries
- 1
Thanked: 4200I vouch for Phil as well.
Have had him and Jane, his lovely bride attend a number of the CDN GTGs and teach honing to the new folk, as well as hone a bunch fir the people in attendance.
From a north of the border professional store and hone service, they are as good as it gets.
I’ve purchased stones and strops and scents from Phil, but nary a razor and yet his service and civility has always been about the craft. He honed one of my first, bad restores, spent hours resetting my bevel, and charged me regular rate for the efforts.
Classic service from Classicedge.
That being said, as Cuda and tc have said, there are members here that could go edge to edge with Phil for sure. One day, I may be one of them,, but not yet...
"Depression is just anger,, without the enthusiasm."
Steven Wright
https://mobro.co/michaelbolton65?mc=5
-
The Following User Says Thank You to MikeB52 For This Useful Post:
TripleD (03-02-2019)
-
03-02-2019, 03:16 PM #5
- Join Date
- May 2016
- Location
- Magog, Quebec
- Posts
- 560
Thanked: 81Welcome to the forum!
Classic Edge is also my go-to for the hardware. Phil and Jane are great, and I always prefer supporting a family business. Anytime you have questions about the gear you've bought or want to buy, Phil is happy to chat on the phone about it, and takes his time to explain things well.
Phil has also honed several razors for me, and he does a great job - but if you want him to tape the spines you need to specify it.