Results 1 to 10 of 29
Thread: John from New England
Hybrid View
-
03-24-2021, 02:19 PM #1
Hello John,
I had my first straight razor shave at 57.
You're never too old to start, just start. 3 months or so and it will feel pretty easy.
I've been straight shaving only since Oct 2019 but it feels so natural and i get such a comfortable close shave that I really can't imagine shaving any other way anymore.
Get a spare razor from the Buy, Sell Trade here on the forum. Any razor you buy from the guys here is sure to be sharp and shave ready and anyone here that sells you a razor is 100% trustworthy.- - Steve
You never realize what you have until it's gone -- Toilet paper is a good example
-
03-24-2021, 03:00 PM #2
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,401
Thanked: 4822Welcome to the forum
It's not what you know, it's who you take fishing!
-
03-24-2021, 03:19 PM #3
Very welcoming! Thank you all.
I'll be sending the Dovo to be honed for the first time (Any recommendations?) But absolutely plan on learning to hone it my self I ordered 2 gold dollars off amazon to start that journey.
I have plenty of knife sharpening stones and equipment but nothing in a high enough grit for razors so that is what I will be on the look out for. I have heard are people having good results with lapping films on glass or might pick up a Norton 4000/8000 combo and a 10-12k stone. but I am not sure yet.Last edited by Audels1; 03-24-2021 at 03:21 PM.
-
03-24-2021, 06:00 PM #4
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,401
Thanked: 4822When I decided to learn to hone, the gold dollars had quality issues and needed to be modified in order to be honed. I was just wanting to learn to hone. I bought NOS vintage and new razors to learn with. As new honers tend to put too much pressure on the spine and cause premature wear, I taped them. None of them suffered from my learning and are still in use. It made learning to hone very simple. Later I learned about repair when restoring some vintage razors. There are a lot of people who can hone. Near you is outback (Mike) and easily mailable is Gssixgun (Glen) and countless others. Also there is a lot of opinion and various techniques on YouTube. It’s near impossible to follow all paths at once. I found I learned easily from Gssixgun videos.
It's not what you know, it's who you take fishing!
-
03-24-2021, 06:14 PM #5
- Join Date
- Feb 2018
- Location
- Manotick, Ontario, Canada
- Posts
- 2,775
Thanked: 552Check out Griffiths Shaving Goods. He is based in Rhode Island and from my own personal experience is a very reputable dealer of new and vintage blades as well as hones and strops.
David
“Shared sorrow is lessened, shared joy is increased”
― Spider Robinson, Callahan's Crosstime Saloon
-
The Following User Says Thank You to DZEC For This Useful Post:
Audels1 (03-24-2021)
-
03-24-2021, 06:26 PM #6
Welcome from another member from New England (Boston metro area here). I second the recommendation to check out Griffith Shaving Goods. Matt, the owner, sells some nice vintage razors and does a good honing job on them. He also sells natural sharpening stones from Rhode Island from time to time, which may be of local interest to you if you take up honing. A couple of them can be used as finishers off, say, an 8k synth hone.
Me, I started shaving and honing straight razors in 2011.Last edited by Brontosaurus; 03-24-2021 at 06:29 PM.
Striving to be brief, I become obscure. --Horace
-
The Following User Says Thank You to Brontosaurus For This Useful Post:
Audels1 (03-24-2021)
-
03-24-2021, 08:30 PM #7
Yep lots of people jump out of a plane before they pack a chute, but hey why shave at all just hone, that way you never know if the edge is good, call it a win win
“ I,m getting the impression that everyone thinks I have TIME to fix their bikes”
-
03-24-2021, 08:46 PM #8
Learn to shave! Strop!
Stropping can keep an edge keen and ready for shaving for a long time. But improper stropping will damage an edge easy too. That alone is what you should learn to do BEFORE ALL ELSE! Worry about the rabbit hole of honing next year.
Honing takes a long time to learn. It's nothing like sharpening a knife! A lot of us have been down that same road and we try to help others to not make the same mistake. Learn to shave first! After 6 months or so then learn to maintain an edge with a finishing stone or barber hone. Only a few laps are needed. A razor treated properly will not need to be honed very often. Unless your going to be a collector and/or restorer of razors (like most of us are) there is no need to buy all the stones needed for honing. we do have a couple of guys here that still push the film thing but I will leave my comment out of that one.It's just Sharpening, right?
Jerry...
-
The Following User Says Thank You to Gasman For This Useful Post:
Audels1 (03-24-2021)
-
03-24-2021, 11:21 PM #9
-
03-24-2021, 10:18 PM #10
I have a Gold Dollar that I got to practice honing and scaling etc.
The problem is that like most new razors they aren't shave ready and will need honing. That's not actually the problem now i think about it.
The real problem may be finding someone that is willing to hone them.
I was really surprised how sharp mine was after i honed it for practice, actually it's in my rotation until it needs honing again but the initial honing may have been more luck than judgement.
It is still worth getting a vintage razor from here, they are not expensive for something suitable to start with, it will come shave ready and it will be easy to find someone to hone it again when it needs it, bear in mind that the more cheap vintage razors you get yourself the less often that they need honing. I have 14 so I use each one twice a month, that's only 24 times in a year!
There are guys here that have hundreds!
The last thought, if you don't make sure you have a truly shave ready razor you won't be able to tell if your razors are sharp or need refreshing.- - Steve
You never realize what you have until it's gone -- Toilet paper is a good example
-
The Following User Says Thank You to STF For This Useful Post:
Audels1 (03-25-2021)