Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree4Likes

Thread: Gold Dollar .... I learn the hardway

  1. #1
    Senior Member
    Join Date
    Apr 2014
    Location
    Berks Cty, Pa
    Posts
    234
    Thanked: 25

    Default Gold Dollar .... I learn the hardway

    I asked recently about Chieese Razors and was given good advice. Looked at the 80 page post on GD's and came away with the thought that with some mods, it could be made into a shaver.
    Well, the one I received had many flaws and questionable geometry.
    Ignoring the bent tang and edge frown, I used my dremel to grind away the heel web so that the spline/edge could lay flat on a stone.
    Then I hit the 320 DMT, 600DMT, 4k/8k Norton, 12k Nami, .5 Oxy, web and leather.
    I hammered the 320 and 600 for a long time before moving on.
    But the real "pi$$ me off " came on the strop. After a half dozen laps I was horified to see 8" long scratches on the left side of my new English Briddle strop !!! I looked all over the razor, but could not find anything that should have caused that. No sharp edges, burrs, or nasty toe point.
    I started to shave one side of my face with it just to see how I had done.....it was passable, but not real good.
    It's in the trash now...GONE !!

    I wonder if the strop is ruined? I can feel the grooves with my fingernail going across them.

  2. #2
    There is no charge for Awesomeness Jimbo's Avatar
    Join Date
    Aug 2006
    Location
    Maleny, Australia
    Posts
    7,977
    Thanked: 1587
    Blog Entries
    3

    Default

    The strop's not ruined - the cuts or scratches that really ruin a strop are the ones that run perpendicular to the length, not parallel. And even then, there's sometimes things you can do.

    I'd suggest a little strop dressing, then just work it in with your hand for a while. See if that helps with the scratches. If after a few days of the hand thing (just dress it once initially with oil/whatever) the scratches are still noticeable to the touch you can think about something a bit more drastic like a light sanding or pumice.

    James.
    earcutter and Steel like this.
    <This signature intentionally left blank>

  3. #3
    Senior Member blabbermouth Steel's Avatar
    Join Date
    Nov 2013
    Posts
    2,321
    Thanked: 498

    Default

    Sorry to hear your luck. Anytime you get a razor it could have geometry issues. I just got one (German) that has a pretty bad warped spine. GD's are known for there issues too so it's the luck of the draw and the skill of the person. I lucked out and my GD is one of my best shavers.
    scotishcavalir likes this.
    What a curse be a dull razor; what a prideful comfort a sharp one

  4. #4
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    Yet another warning re GDs. True, some people get good shavers, but the good to bad ratio is pitiably small and then you have to invest so much effort in getting the d**n thing to shave that you may as well have bought a decent razor in the first place.

    Chinese junk IMO, it just so happens that whereas most reputed makers turn out the odd few rubbish razors, GD have reversed the trend and turn out the odd few passable razors.

    Me - I wouldn't even consider buying or honing one.

    Regards,
    Neil

  5. #5
    Senior Member
    Join Date
    Apr 2014
    Location
    Berks Cty, Pa
    Posts
    234
    Thanked: 25

    Default

    Quote Originally Posted by Jimbo View Post
    The strop's not ruined - the cuts or scratches that really ruin a strop are the ones that run perpendicular to the length, not parallel. And even then, there's sometimes things you can do.

    I'd suggest a little strop dressing, then just work it in with your hand for a while. See if that helps with the scratches. If after a few days of the hand thing (just dress it once initially with oil/whatever) the scratches are still noticeable to the touch you can think about something a bit more drastic like a light sanding or pumice.

    James.
    James, I immediately laid the strop on the counter and rubbed hard with the heel of my hand. The scuffed surface lost the whitish color, blending in, and I felt the grooves became more shallow and less pronounced.
    A lot of potty mouth going on.
    I'll work on it some more. I have the same thought with the parallel grooves being less detrimental,

  6. #6
    Have Married My Coticule
    Join Date
    Dec 2013
    Posts
    318
    Thanked: 39

    Default

    I wonder whether going from 320 and 600DMT to 4k was not perhaps too big a jump, having 'hammered' those lower grits?

  7. #7
    Senior Member
    Join Date
    Apr 2014
    Location
    Berks Cty, Pa
    Posts
    234
    Thanked: 25

    Default

    Could be, but it will be all theory from here on. It's in the trash.

  8. #8
    Wid
    Wid is offline
    Senior Member Wid's Avatar
    Join Date
    Aug 2010
    Location
    Wilmington IL
    Posts
    757
    Thanked: 107

    Default

    Not a fan either but going from the 600 to a 4K is to big of a jump imo.

  9. #9
    Member
    Join Date
    May 2014
    Location
    Sonoma, California
    Posts
    39
    Thanked: 0

    Default

    I got a 66 that isn't too bad. Takes a nice edge, just needs the stabilizer on the heel taken down. Only other thing is 1 spot on the hollow was ground a bit on the spine. Purely cosmetic and minor.

    I payed 4$ new, so totally worth it. It is a real carbon steel blade to mess with and no worries about screwing it up.
    Steel likes this.

  10. #10
    Senior Member johnmrson's Avatar
    Join Date
    Dec 2009
    Location
    Sunshine Coast, Australia
    Posts
    1,590
    Thanked: 311

    Default

    If you're reasonably inexperienced and looking for a good razor to shave with, then stay away from them. If you're a competent honer and want something to play around with and do some experiments on blade shapes then they can be great fun.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •