The same for the good brake cleaner… spray brake cleaner on a towel and wipe the blade, when buffing.

Make some sanding sticks, glue some 1 & 2K Wet & Dry to a couple of coffee stir stick & sand between the scales, sand the outside or use the steel wool as suggested. Polish with a good metal polish.

In the future, WD40 and fine steel wool, or some Crocus Cloth from Ace hardware for a satin finish, one sheet lasts a long time.

Leave your razor open, to dry. I use an old thrift store, glass tray from a butter dish and set it open across the dish, so the blade is out of the scales, for good air circulation, after drying on a micro fiber.