Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Oct 2009
    Location
    Brit working in Saudi Arabia
    Posts
    35
    Thanked: 0

    Default Hone a relatively new razor?

    I am new to straight razor shaving and I have only tried one razor, the one I bought which is a Dovo Stainless.
    I know it was described as shave-ready, and that it probably wasn't. I have with me a strop and a yellow coticule.
    I know it is difficult to say without seeing, but would any of you think it worth giving this razor a light honing. I have nothing to compare it with. I'm getting a shave with it, but I'm not blown away. Does it hurt the razor to hone unnecessarily?
    Ady

  2. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    It could hurt it if you don't know how to hone correctly. You say it came 'shave ready' and it is shaving. Did it come from a reputable source ? Since you are shaving lets assume that it may not be the razor. Why not work on your preparation and your stretching, blade angle and general shaving technique before you take it to the hone. Stropping is paramount also.

    If it was me I would get a full bladed vintage razor or two or three off of ebay or in an antique store to practice honing before I messed with my only razor. Don't expect to be blown away by a straight razor shave in the beginning. When we say there is a learning curve it is the real tip.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. #3
    Hibernator ursus's Avatar
    Join Date
    Aug 2009
    Posts
    623
    Thanked: 134

    Default

    Quote Originally Posted by adydye View Post
    I am new to straight razor shaving and I have only tried one razor, the one I bought which is a Dovo Stainless.
    I know it was described as shave-ready, and that it probably wasn't. I have with me a strop and a yellow coticule.
    I know it is difficult to say without seeing, but would any of you think it worth giving this razor a light honing. I have nothing to compare it with. I'm getting a shave with it, but I'm not blown away. Does it hurt the razor to hone unnecessarily?
    Ady
    Prep or technique are other things that are essential for a nice shave

    It would help to know where did you get the blade...

  4. #4
    Member
    Join Date
    Oct 2009
    Location
    Brit working in Saudi Arabia
    Posts
    35
    Thanked: 0

    Default

    I got it from www.charlesnicholls.co.uk so I would expect it to be as good as Dovo ship them out.

    I bow to you guys' knowledge about the prep and so on and will concentrate on stropping.

    By the way, I'm not unhappy with my first few shaves and I'm not expecting to sprint before I can amble.

    I read Christopher Moss's pdf guide, and I think that gave me a good grounding.

    I really want to hone when the time comes and I am overseas so other razors are not available.

    Ady

  5. #5
    Senior Member shooter1's Avatar
    Join Date
    Oct 2009
    Location
    SE Arizona
    Posts
    132
    Thanked: 48

    Default

    Not blown away... not sure what this means, but as a comparison, there are many who do not equal as good a shave as they get from a double edge for some time. Shaving with a straight and getting that "blown away" BBS feeling takes good prep, good technique, and time practice and patience.

    Unfortunately the only true and accurate measure of shave readiness is shaving hair. Fortunately most have arm hair that can be used as an indicator. Testing shave readiness by any other means is inconsistent at best, and likely to dull the razor IMHO. If the razor is able to shave arm hair cleanly and without pulling, it is most likely not shaving the face due to prep or technique issues (skin stretching is key).

    If the coticule has not been properly prepared for use (lapped / flattened), it may do more harm than good. I am not a coticule user, but most all stones need to be lapped prior to use.

    My .02 cents

  6. #6
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I'm not personally familiar with the vendor so I can't say as far as the shave ready. If and when you do decide to give honing a try here is a website Bart put up dedicated to honing with the coticule. SRP's Wiki here also has great honing tutorials and videos.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  7. #7
    Hibernator ursus's Avatar
    Join Date
    Aug 2009
    Posts
    623
    Thanked: 134

    Default

    Browsed the site and I didn't find any indication they would hone them before shipping out. Pop them the question to be certain. I'd wager your blade is factory-sharpened.

    You could always use the edge as long as it is comfortable (but don't use any pressure. My Grampa used to say the deepest wounds come from dullest blades). Practice your shaving and stropping as long as you can...

    When it starts to get uncomfortable, honing comes into question.

    Maybe learning to hone yourself might be your best bet considering your location. However, there is always the risk of not being able to get the edge good enough (that's why I said the above comment about using it till it lasts) and having to fall back to sending it out.
    Last edited by ursus; 12-17-2009 at 05:30 PM.

  8. #8
    Senior Member AlanII's Avatar
    Join Date
    Apr 2008
    Posts
    1,689
    Thanked: 244

    Default

    It might be worth getting a shave ready razor to compare (wish I'd started with one). Once you know what you're aiming for, your coticule should be OK to practise on. This is a UK site that I can vouch for. Vintage razors pay back more or less what you pay for them too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •