Thread: deeper blade = sharper razor?

Originally Posted by blockhead

Just to see if a few layers of tape would maybe make a difference in the longevity of the edge.

More than a few layers of tape will affect the stropping in a way that will negatively affect the longevity of the edge, and taking the width of the blade down to 4/8 or less will make it harder to hone so it'll be harder to get the same level of sharpness. IME longevity is so heavily affected by stropping that it's hard to compare razors, because if your stropping is bad then your edges won't last no matter what the honing angle is. Once you get your stropping down then edges will last many months, but this means it can take many years to get a good comparison of just two razors, and you really need to test a bunch of them to make sure it's the angle that's affecting the longevity and not some other variable.

The only way I can think to test this in a reasonable time frame without involving the stropping variable would be to make several razors out of the same stainless steel, with say 17 degree and 25 degree angles, and just don't strop at all. In theory this would put you on the same playing field as the cartridge razors who can get a week o so out of an edge without stropping, and would give you a fast enough turnaround time that you could perform a good number of tests in a reasonable amount of time.

Personally, I don't think the higher angle makes a practical difference in longevity for HCS razors, with good stropping my edges last for 3-6 months of daily use, and other can get a year or more out of a single edge, and HCS razors must be stropped in order to keep the corrosion in check.

I think the more useful application of this is in stainless razors, because they don't have the corrosion issue the way HCS blades do, so a higher angle blade could get you a long edge life without much stropping - this works for the cartridge blades after all, which can often last two weeks to a month without stropping, and it seems quite possible to me that a stainless straight razor should be capable of going many months with only occasional stropping, basically stropping would become something you do as a touch-up instead of as a daily (error-prone) task. It is interesting that in their patents Gillette claims that 28 degrees gives you the sharpest edge on stainless steel. Not just a long-lasting edge, but actually the sharpest edge. I don't know if what they really mean is "sharpest edge using our variable-diameter helical-wheel 3600rpm honing machines" or if their experience is applicable to hand-honed straight razors. But it's an interesting data point, and it would be funny if the reason stainless steel never took over straights the way it did DE and cartridge blades is because the straight makers kept making stainless razors using the geometry that had been optimized for HCS razors that turns out to have been extremely suboptimal for stainless.