Page 1 of 4 1234 LastLast
Results 1 to 10 of 32
  1. #1
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Question Cheap Filli scales?? on $$ blades - what gives?

    I read in different posts that Filarmonica's had cheap scales, but dodn't really think too much of it until I got mine (a Filli #14 Doble Temple)...Great blade, great shave, but boy the scales are cheap plastic junk

    They don't center well with the blade and the balance is something to be desired.


    What do other owners of Fillis think about this?

    PS: Some of these are going for >$300 (especially the EPBD).

    -Robert

  2. #2
    Senior Member RetroGrouch's Avatar
    Join Date
    May 2008
    Location
    Vancouver, BC
    Posts
    132
    Thanked: 14

    Default

    Once upon a time, they were affordable razors and didn't get much attention.

    Now (for whatever reason) they're "hot". Prices have gone through the roof... and their cheap scales look out of place.

  3. #3
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    The scales on mine are tolerable. There seems to be quite a range of scale quality - almost hit or miss. IMO, even for $100 razors, the inconsistency of the scales is astonishing. Could you imagine if even the Dovo Best Quality had scales that bad? You'd never hear the end of it.

  4. #4
    Customized Birnando's Avatar
    Join Date
    Feb 2010
    Location
    Oslo, Norway
    Posts
    5,079
    Thanked: 1694

    Default

    Yeah, the scales are not good at all!

    I have 3, out of a total of 8, which doesn't close properly. I'm having all of them rescaled.
    The same thing is happening to my Ducal and my Palmera's.
    Just need to figure out what material to use, so that the balance doesn't get too thrown off.

    That said, my Bergischer Löwe is similar in that it needs guidance when closing. It was that way from when it was brand spanking new. Very flexible and soft scales on that thing.
    Bjoernar
    Um, all of them, any of them that have been in front of me over all these years....


  5. #5
    Vintage Scent shop clerk Leon's Avatar
    Join Date
    May 2007
    Location
    Porto, Portugal
    Posts
    1,023
    Thanked: 621

    Default

    Quote Originally Posted by BladeRunner001 View Post
    They don't center well with the blade and the balance is something to be desired.

    What do other owners of Fillis think about this?
    Robert, I have quite a few Filarmonicas of many different models. The scales are not warped and the blades center well (maybe I've been lucky?). The material of the scales is cheaper than you'd expect from a >$300 razor. But, it's the blade, not the handle that shaves, right? Besides, I have a NOS Dorko with plastic scales that are a piece-of-s%#&, badly finished with lumps and scratches. Vintage Puma and Dorkos are also highly regarded here and they have also plastic scales. And they shave great too.
    Last edited by Leon; 05-31-2010 at 09:36 AM.

  6. #6
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Unhappy

    Yeahh...I know. it's disappointing to be honest

    -Robert

    Quote Originally Posted by RetroGrouch View Post
    Once upon a time, they were affordable razors and didn't get much attention.

    Now (for whatever reason) they're "hot". Prices have gone through the roof... and their cheap scales look out of place.

  7. #7
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Default

    Hi Dylan,
    Well...I heard that DOVOS are hit or miss too. Seems like manufacturers just want to cut costs and maximize profit these days. If I were to do that, scales would be the logical part to do it with. I guess that goes to say why vintage str8 may be more sought after...both blade & scale were paid attention to.

    What's next: we will have Gillette make disposable str8 razors??


    Cheers,
    -Robert


    Quote Originally Posted by holli4pirating View Post
    The scales on mine are tolerable. There seems to be quite a range of scale quality - almost hit or miss. IMO, even for $100 razors, the inconsistency of the scales is astonishing. Could you imagine if even the Dovo Best Quality had scales that bad? You'd never hear the end of it.

  8. #8
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Default

    Hi Birnando,
    Mine doesn't center well at all...I thinking same: i.e., to have it rescaled. But, I wonder if that will decrease the value and "vintage-ness" over time. Part of the appeal with these str8s is to keep them as original as possible while enjoying and shaving with them.

    -Robert

    Quote Originally Posted by Birnando View Post
    Yeah, the scales are not good at all!

    I have 3, out of a total of 8, which doesn't close properly. I'm having all of them rescaled.
    The same thing is happening to my Ducal and my Palmera's.
    Just need to figure out what material to use, so that the balance doesn't get too thrown off.

    That said, my Bergischer Löwe is similar in that it needs guidance when closing. It was that way from when it was brand spanking new. Very flexible and soft scales on that thing.

  9. #9
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,740
    Thanked: 3180

    Wink

    Hi Leon,
    I agree with you (for the most part )...the str8s qualitative (and functional) value is in the blade, not the scale. But, I think that there are two important characteristics that the scale offers:

    1. As I understand it (and from the mechanics of a everyday shaving), the scale provides balance to the blade during a shave. I don't find this to be the case with my Filli 14DT.

    2. Also, a floppy scale may not allow for proper centering when closing, increasing likelihood of edge damage if not careful.

    That's not to mention that most (well at least me) of us buy these things for their looks and aesthetic value...cheap plastic scales are just that: cheap!!

    Cheers,
    -Robert

    Quote Originally Posted by Leon View Post
    Robert, I have quite a few Filarmonicas of many different models. The scales are not warped and the blades center well (maybe I've been lucky?). The material of the scales is cheaper than you'd expect from a >$300 razor. But, it's the blade, not the handle that shaves, right? Besides, I have a NOS Dorko with plastic scales that are a piece-of-s%#&, badly finished with lumps and scratches. Vintage Puma and Dorkos are also highly regarded here and they have also plastic scales. And they shave great too.

  10. #10
    Senior Member crankymoose's Avatar
    Join Date
    Jan 2007
    Location
    PA
    Posts
    275
    Thanked: 63

    Default

    I have a few Philarmonica's one which I got from Leon has excellent scales the other 3 were poor at best and have since been rescaled nicely by Glen (gssixgun).

    By comparison I have about a dozen each of Dovo and Ti's on the Dovo's maybe I just been lucky but generally mine are all pretty good but one that I have to watch when closing the blade or it will hit the side of the scale.

    The TI's scales or perhaps it is there method or lack there of attaching them leaves plenty to be desired, over 1/2 are crooked or misaligned and or cut uneven but as has been mentioned it is the blades that I shave with.

    When I buy a razor I buy it first for the blade and I will admit the scale shape and or appearance do enter in somewhat but not enough to either make me buy a razor or not I have been surprised by the quality of cheap plastic scales on some razors and also severely disappointed by expensive or even custom scales. Fortunately there are several people on SRP who do quality rescales.

  11. The Following User Says Thank You to crankymoose For This Useful Post:

    BladeRunner001 (05-31-2010)

Page 1 of 4 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •