Results 1 to 5 of 5
  1. #1
    Senior Member HigherFasterNow's Avatar
    Join Date
    May 2011
    Posts
    211
    Thanked: 22

    Question Thiers-Issard Sparticus, Eagle Brand, Le Canadian?

    Just a quick question: are the above razors all the same but they've just slapped a different brand on them?

    Thanks so much;

    HigherFasterNow

  2. #2
    Senior Member ats200's Avatar
    Join Date
    Dec 2010
    Location
    Las Vegas, NV
    Posts
    702
    Thanked: 75

    Default

    I can't be 100% sure which ones you're talking about without seeing them, but I'm thinking they could all possibly be made by Thiers Issard but in different years. I think I remember seeing a Canadian being sold on eBay but it looked to be a vintage model. I'm sure someone who knows a bit more will respond, though.

  3. #3
    Senior Member
    Join Date
    Jul 2010
    Location
    Central new jersey, USA
    Posts
    728
    Thanked: 240

    Default

    TI puts different etching and gold wash on the same razor for different vendors. Eagle brand is only sold by knifecenter, le Canadian by Rasage Poulin, le theirnois by fendrihan, art of shaving by art of shaving... And I'm sure there are others I dont know. None of the names are limited to any specific TI model instead represents the vendor it was purchased from. For example Thiers Issard Straight Razors - Shaving | Fendrihan Shaving Store here you can see multiple le theirnois razors at fendrihan of varying widths. from 5/8-7/8. When rasage poulin was still up they used to have an even wider selection. The Spartacus I am less sure about but I believe I remember multiple vendors carrying it. It was also seen in varying styles mainly 6/8 and 7/8 but varying from spainish point to round point. TI also has a wolf and ram labeled razor that I believe may be a "generic" as in is not specifically licensed to an individual retailer. So in answer to your question none of those razors are single models but rather a label of the vendor that sells them. I picked all this up when I was searching for my latest purchase a historic worked back 7/8th branded as an eagle, at the time rasage poplin was selling the identical model with it's own le Canadian brand alongside an identical spartacus... Sorry for dragging on but I hope that answers your question.

  4. The Following 2 Users Say Thank You to thehekler For This Useful Post:

    ats200 (06-09-2011), drayroseman (11-02-2011)

  5. #4
    Senior Member blabbermouth niftyshaving's Avatar
    Join Date
    Oct 2009
    Location
    Silicon Valley, CA, USA
    Posts
    3,157
    Thanked: 852

    Default

    Quote Originally Posted by HigherFasterNow View Post
    Just a quick question: are the above razors all the same but they've just slapped a different brand on them?

    Thanks so much;

    HigherFasterNow
    Thiers-Issard makes a longish list of razors.
    Some of these are rebranded, some are made to specification
    and have different scales or spine work.

    All TI razors are quality!
    My Sparticus is well hardened and lightly tempered when
    compared to some of my other razors.
    Some TI razors are made from old LE GRELOT forgings.
    Some from Carbonsong’ C135 steel blanks.
    Some from Extra-fine carbon steel.
    All are quality...

    Some of the lower price TI blades are
    lower price because the scales are lower
    cost.

    It pays to have a TI professionally honed
    one time for sure. Depending on when it
    was made the factory edge can be difficult
    to refresh as the bevel is not well set
    for hand honing from the factory.

    Based on my Sparticus... well recommended.

    Edit:
    To see some of the variety check out:
    http://www.thiers-issard.co.uk/7-daysetcommissions.html
    Last edited by niftyshaving; 06-09-2011 at 09:55 PM.

  6. The Following User Says Thank You to niftyshaving For This Useful Post:

    drayroseman (11-02-2011)

  7. #5
    Senior Member HigherFasterNow's Avatar
    Join Date
    May 2011
    Posts
    211
    Thanked: 22

    Default

    Quote Originally Posted by thehekler View Post
    TI puts different etching and gold wash on the same razor for different vendors. Eagle brand is only sold by knifecenter, le Canadian by Rasage Poulin, le theirnois by fendrihan, art of shaving by art of shaving... And I'm sure there are others I dont know. None of the names are limited to any specific TI model instead represents the vendor it was purchased from. For example Thiers Issard Straight Razors - Shaving | Fendrihan Shaving Store here you can see multiple le theirnois razors at fendrihan of varying widths. from 5/8-7/8. When rasage poulin was still up they used to have an even wider selection. The Spartacus I am less sure about but I believe I remember multiple vendors carrying it. It was also seen in varying styles mainly 6/8 and 7/8 but varying from spainish point to round point. TI also has a wolf and ram labeled razor that I believe may be a "generic" as in is not specifically licensed to an individual retailer. So in answer to your question none of those razors are single models but rather a label of the vendor that sells them. I picked all this up when I was searching for my latest purchase a historic worked back 7/8th branded as an eagle, at the time rasage poplin was selling the identical model with it's own le Canadian brand alongside an identical spartacus... Sorry for dragging on but I hope that answers your question.
    Quote Originally Posted by niftyshaving View Post
    Thiers-Issard makes a longish list of razors.
    Some of these are rebranded, some are made to specification
    and have different scales or spine work.

    All TI razors are quality!
    My Sparticus is well hardened and lightly tempered when
    compared to some of my other razors.
    Some TI razors are made from old LE GRELOT forgings.
    Some from Carbonsong’ C135 steel blanks.
    Some from Extra-fine carbon steel.
    All are quality...

    Some of the lower price TI blades are
    lower price because the scales are lower
    cost.

    It pays to have a TI professionally honed
    one time for sure. Depending on when it
    was made the factory edge can be difficult
    to refresh as the bevel is not well set
    for hand honing from the factory.

    Based on my Sparticus... well recommended.

    Edit:
    To see some of the variety check out:
    TI 7-day sets
    Thanks so much! That's some great information. Those 3 specifically look the same. I was just at work so I wasn't able to check properly by reading about all 3. Ill have a chance when I get to the hotel. If you guys like I'll post my findings. Once again thanks for the information.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •