Results 1 to 10 of 25
Thread: Gun oil vs WD-40
Hybrid View
-
07-18-2011, 05:02 AM #1
+1
Yes what he said...
It does displace water in the pivot and
on the surface of the steel. That can
help especially when followed by a
people safe oil...
This is a topic where a lot of people
have history with this product and
know from personal experience if it
is suitable for their environment and uses.
The WD-40 FAQ is interesting
note the "additional applications"
bit.... this implies (to me) that long term
storage needs help.
WD-40 Frequently Asked Questions
Q: How long does WD-40 last after application?
A: While this may vary depending on the application, WD-40 remains effective even after
it appears to dry. The corrosion and rust protection ingredients remain adhered to the
surface. External conditions may, of course, require additional applications of WD-40 for
maximum protection.
=====================
Read more about "breakfree CLP"
Break-FreeŽ
I hope I said that WD-40 needs help for
long term storage... CLP is one good
choice to evaluate.
-
The Following User Says Thank You to niftyshaving For This Useful Post:
PaulKidd (07-18-2011)
-
07-18-2011, 07:03 AM #2
PaulKidd,
If specialist preservatives are hard to come by in Tonga, you could try using motor oil as as a preservative; it contains detergents, corrosion inhibitors etc, and can do a fine job and is usually very available
Have fun !
Best regards
Russ
-
The Following User Says Thank You to PhatMan For This Useful Post:
PaulKidd (07-18-2011)
-
07-18-2011, 12:22 PM #3
- Join Date
- Jan 2008
- Location
- Northern California
- Posts
- 1,301
Thanked: 267WD-40 has some harsh chemicals in it that I would not trust on some scales like bone or whatever. The best single step application thus far is Corrosion-X. It displaces water, bonds with metal and gives a protective barrier against rust. It is not toxic and food grade. Take a look at it on line. I have been using this stuff for guns and other fine pieces of steel for over a decade and it performs excellently. There are different thicknesses that you can obtain and for long time storage I would get the thick stuff. Just as a side note do not use on a new gun like an automatic because it will not break in, it lubes that well.
Take Care,
Richard
-
The Following User Says Thank You to riooso For This Useful Post:
PaulKidd (07-18-2011)
-
07-18-2011, 12:38 PM #4
Ballistol or rig, either is well reommended. I learned about rig when I was in the Marine Corps. It is a splended product, but you might not like the smell. Some of the guys here use ballistol, I have purchased a razor which had been covered with it and I like this product very much. Besides being a great protectant, no petroleum smell.
-
The Following User Says Thank You to BanjoTom For This Useful Post:
PaulKidd (07-18-2011)
-
07-18-2011, 04:01 PM #5
+1 good product.
Always read the vendors data sheets:
http://www.corrosionx.com/msds/corrosionx-data.pdf
CorrosionX
For example:
Rubber: No visible effect on Buna-N, Viton or Neoprene products. Slight swelling and/or softening of
butyl rubber items.
-
The Following User Says Thank You to niftyshaving For This Useful Post:
PaulKidd (07-18-2011)
-
07-18-2011, 12:43 PM #6
- Join Date
- Jun 2011
- Location
- miami,fl
- Posts
- 577
Thanked: 69
-
The Following User Says Thank You to paco664 For This Useful Post:
PaulKidd (07-18-2011)