Quote Originally Posted by deighaingeal View Post
I wouldn't repin. Just tighten what you have unless it is bent.
I also don't bother with divots in my anvil. I use a jewelers block to back the pin when I tighten or pin a razor.
I also don't like the replaceable head hammer or a 13 oz ball peen. Find the smallest hammer you can whether that be a jeweler's hammer or a tack. Many have also used heavy spoons in a bind. The replaceable heads always came loose on the hammers I had that could do that.
I agree, this should be moved to the workshop, you would get a lot more traffic there.

I used Loctite on my hammer so the replaceable ball peen doesn't back off any more.