Results 1 to 10 of 15
Hybrid View
-
01-07-2012, 10:50 PM #1
Well this is an easy question. Just think about it. Why do so few people drive with a manual tranny, why don't women wash clothes in the bathtub with a washboard, why do see people's shopping carts in the supermarket filled with convenience foods and prepared meals?
It's all about convenience and ease of use. Most folks think you're crazy for using a straight. Who wants to fuss over a shaving implement and hone and strap and risk cutting themselves every day?No matter how many men you kill you can't kill your successor-Emperor Nero
-
01-07-2012, 11:13 PM #2
- Join Date
- Aug 2010
- Location
- Between Owensboro and Bowling Green KY
- Posts
- 236
Thanked: 31Also not many have knowledge that str8s and DEs not only performs great but even EXIST!
"The needs of the many out way the needs of the few or the one." Only if the 'few' or the 'one' are/is offering themselves (thru freewill) for the sacrifice. And not thru force from the 'many'.
-
01-08-2012, 04:36 AM #3
- Join Date
- Jun 2010
- Location
- Brisbane/Redcliffe, Australia
- Posts
- 6,380
Thanked: 983Ah but do they really exist?! Might they not just be some mass hallucination brought about by corrupt world governments experimenting on the people of the world?!
Mick
-
01-08-2012, 04:54 AM #4
Oh no, I totally agree with you about straights. They aren't convenient and that, frankly, is why I love them.
What baffles me is DEs and things like the Rolls Razor (of course, I haven't actually tried shaving with it, so maybe it provides a lousy experience and I shouldn't be lumping it in here). At least with a DE there isn't any added convenience to cartridge razors. The sole area where cartridges win is that I can buy more blades at the grocery store and that's purely because of market dominance. Market dominance that comes through no identifiable intrinsic quality of the product.-Zak Jarvis. Writer. Artist. Bon vivant.
-
01-09-2012, 03:11 AM #5
And if you notice ,you CAN buy DE blades at the supermarket, BUT you cant buy a RAZOR almost anywhere???? Whats up with that !!!
And buy the way use the rolls first before singing its praises,I have two,and there OK.............not great, but they were around for a looong time.
-
01-11-2012, 10:38 PM #6
I'm not sure I'd want to USE most of the DE blades I see in supermarkets, but that's truly an excellent point about buying the razors. I haven't seen them new in a store in a long, long time (and I know there are new ones being made).
I did give the Rolls a go. First I looked up the instructions to see how they suggested doing the honing.
The instructions say you should A) hone it at about 60 strokes per minute for 30 seconds, with a stroke being both forward and backward and B) that you should not make the blade hit the hone too hard. Maybe I'm missing something, but I cannot do BOTH of those things.
After a ton of using the built in hone I've got an edge that only has a little bit of serration.
It HURT.
So now I'm gonna see if I can get my Chinese polishing stone cut down to fit where the old hone is now-Zak Jarvis. Writer. Artist. Bon vivant.
-
01-12-2012, 12:00 AM #7
- Join Date
- Jun 2010
- Location
- Brisbane/Redcliffe, Australia
- Posts
- 6,380
Thanked: 983I have said this somewhere else before I know, take the rolls blade and using some small care, hone it similar to how you do with your open razors. Using your full size hones to do the task. You'll have to work out how best to do this for yourself, but I just apply enough finger pressure to guide the blade down the hone, flip it over end wise and guide it down the hone again. I start from the end of the hone furtherest away from me and guide the blade towards me.
The hone in the rolls kit is good for minor maintenance, and that is about it. The good thing about that though is that minor maintenance is easy with a rolls. If you really don't like it, send it to me...
Mick
-
01-12-2012, 12:06 AM #8
I actually did a little bit of that with the CNAT, but I got concerned about bevel angle since laying it flat on the stone is a very different angle from the way it gets honed in the case.
If I don't like the second one I bought, I'll send you that one.-Zak Jarvis. Writer. Artist. Bon vivant.
-
01-12-2012, 02:41 AM #9
Actually, Mick is right, taking the blade off and putting on some tape a couple of layers at least until the angle is about what it would be inside the machine, and hone it that way. I've done that, and gotten some decent shaves from it, not great but not bad, all depends on how much patience you have honing the blade, I got it really sharp once and I got a good shave that time and a few more, but then I used the home that comes with it and that's kind of rough in my opinion, and ruined the job that I had.. Since then my efforts have been towards my Straits, and as most of the old-timers here will tell you practice does make perfect, and I don't want to break my arm patting myself on the back as self praise stinks, but I'm getting pretty good. Humbly yours
Griz
-
The Following User Says Thank You to Grizzley1 For This Useful Post:
MickR (01-12-2012)