Reshaping old scales

I finally got my Red Imp today. Unfortunately, the guy I got it off of neglected to tell me that the toe is worn and the scales are severely warped. The toe is a matter to be dealt with later, the scales are a different matter. You may not be able to tell from the pictures but these scales are bent and warped in a rather severe 'S' shape. Both of them. Also, the edges of them look almost melted. I am looking for advice on how I could fix these scales?

Attachment 94794
Attachment 94795

I think if you read in the restoration thread it has a sticky on how to restore scales.

Here's the link:
Fixing warped scales - Straight Razor Place Wiki

thanks guys, sometimes I find there is so much here i forget about the wiki :banghead:

Quote:

---

Originally Posted by Nuntits

thanks guys, sometimes I find there is so much here i forget about the wiki :banghead:

---

No worries. I have to in the past. The search bar is our friend. ;)

I highly reccomend the Steam Method on those,, and use the gentle over the pot of water method, not the Shot-o-Steam iron those Impy scales are notoriously fragile..

Quote:

---

Originally Posted by gssixgun

I highly reccomend the Steam Method on those,, and use the gentle over the pot of water method, not the Shot-o-Steam iron those Impy scales are notoriously fragile..

---

Yeah I'm learning that >.<

One thing I have done that works most of the time (will need to be totally unpinned) is to use a hotplate set at 150 degs.
lay the scales on it,than put a 5 lb bag of lead shot on top of them.You could most likely do the same with a cast iron pan in the oven,let then set for a few hrs,has worked well in the past.

Attachment 94799Attachment 94800

I'm going to the hardware store to get some micro mesh today

Looks that that worked great,Try a hobby store for the MM,orhttp://www.woodcraft.com/Product/2080765/29707/MicroMesh-3-x-4-Soft-Touch-Pads.aspx

Quote:

---

Originally Posted by pixelfixed

Looks that that worked great,Try a hobby store for the MM,orhttp://www.woodcraft.com/Product/2080765/29707/MicroMesh-3-x-4-Soft-Touch-Pads.aspx

---

There is a specialty wood working store in my city that carries it. And I believe they are the only retailers who sell it. Lee Valley

Quote:

---

Originally Posted by pixelfixed

One thing I have done that works most of the time (will need to be totally unpinned) is to use a hotplate set at 150 degs.
lay the scales on it,than put a 5 lb bag of lead shot on top of them.You could most likely do the same with a cast iron pan in the oven,let then set for a few hrs,has worked well in the past.

---

That's a great idea I will defiantly try that next time!