Search:

You dip a finger covered with a glove tip in a puddle of CA and spread it evenly on the scales... I use a paper plate to pour a small puddle of CA onto then dip my finger in there and go


g

Cyanoacrylate - Wikipedia, the free encyclopedia = CA

I have never stained any of the wood I use so that you will have to check on ... I guess I am a slight purist in that I like natural wood...

I think you could get away with using the Flitz as a cutting compound...

I thought it rather fitting that this one is going back across the pond to you Claude after all she is an Ole English Gal :D

I did the Turtle Wax Liquid rubbing compound thrice on this set, followed by Ren-Wax twice...

55383

55384

55385

55386

These were all done in about 1 hour, like I said this finish should take about 6 hours... 5 hours worth of applications and 1 hour of sanding and cutting...
(Please note that grit numbers are just...

Here are some from this morning after another 2 applications now at 4

BTW Normally this can be done way faster, about 1 hour between Med coats and about 20 minutes between thin coats for a total...

These are some pics in process..

The first pic is exactly what I was talking about, an untouched application of CA just kinda on there huh :) nothing really special about putting the CA on the...

Michael is right the regular olé Super Glue is the thin stuff, and right now the easiest to find out an about in Med, is the Gorilla Super Glue impact tough formula (I think that is that only one...

I am going to take some time and give you some hints and tricks to doing these finishes...

Basically you goop it on, let it dry, and sand :) no really that is it... :rock:

OK here are a...