Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree5Likes

Thread: Suggestions on a Shavette?

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    3
    Thanked: 0

    Default Suggestions on a Shavette?

    I have only shaved using an electric shaver before and decided to buy a straight razor. I have read a couple forums and looked for some Shavette razors because that is what most people recommend I should start with. I'm just wondering:

    1. Are there any particular, relatively cheap Shavette razors that are good for beginners? I've seen some dovo for less than $50.
    2. I also read that 5/8 inch width razor is good for starting, but looking at Shavette they don't specify width.
    3. For the replaceable cartridges I keep seeing Derby razor blades. Would you recommend them or any better razor blades?
    4. Using Shavette should i follow the pre-shaving, shaving, and post-shaving techniques besides stropping and honing?

    Please add more information that you think will help me because I'm sure they certainly will. Thank you for taking your time and responding to my questions!

  2. #2
    Junior Member
    Join Date
    Feb 2014
    Location
    The Netherlands
    Posts
    19
    Thanked: 3

    Default

    Hi,

    1. Look for a Parker shavette for example, a lot cheaper than a Dovo and works perfectly.
    2. Due to the replacable DE blades used in shavette's, there is no such thing as blade width with shavette's.
    3. I personally Don't like Derby blades, but that could be different for you. There are blade sample packs available at a lot of vendors.
    4. Sure, I would recommend a good pre and post shave treatment, good soap/cream and brush to everyone, no matter what kind of razor.

    Good luck.
    kevinred likes this.

  3. The Following User Says Thank You to Timothy26 For This Useful Post:

    Phooey (02-26-2014)

  4. #3
    Senior Member
    Join Date
    Nov 2013
    Location
    Loughborough UK
    Posts
    395
    Thanked: 129

    Default

    Hi
    1. Any shavette would be ok they all seem to be about the same to me.
    2. Blade width is irrelevant to a shavette as you use half a double edge blade in the business end. This clips in in a variety of ways depending on the type of Shavette.
    3. They can contain something like a cartridge but most just have half a double edge blade slotted in, the shavette should come with instructions. As for blades each make is different and I would suggest that you get as large a sample of different blades as possible. the reason for this is that different people find that different types of blade suit them, so a recommendation of blade type is very subjective.
    4. Yes follow the techniques but eventually you'll find what suits you best, you may not need the preshaves. The most important points are use no pressure when shaving make sure your prep is good, wash face nice lather etc. Make sure you shave with the grain to start off with and first of all I'd leave it at that. when your confident move on to Across the grain and finally try against the grain when you are fully competent. Also watch the angle of the blade at all times, when starting out put the blade flat against your face and then lift gradually as you bring the razor down/across your face until it starts to cut the beard. Try from the outset to use both hands this will give you more options.
    Anything else we can help with just ask, enjoy the moment!

  5. The Following User Says Thank You to Anthony1954 For This Useful Post:

    Phooey (02-26-2014)

  6. #4
    Alan LaVine
    Join Date
    Feb 2011
    Location
    NYC
    Posts
    74
    Thanked: 7

    Default

    HI,

    If you've only used an electric up to now, I would suggest buying a modest DE razor first. This would be a more gradual introduction to wet shaving in general, and using a blade to shave, in particular. There is a WORLD of difference between any type of wet shaving and an electric, and using a shavette straight away is a set-up for failure, in my humble opinion.

    Best, Alan
    Raol and robscissorhands like this.

  7. The Following User Says Thank You to cigar460 For This Useful Post:

    Phooey (02-26-2014)

  8. #5
    Member OldSalt's Avatar
    Join Date
    Feb 2014
    Location
    Hamburg, Germany
    Posts
    95
    Thanked: 18

    Default

    Hi,
    I use a turkish "Sedef" Shavette. It is the cheapest on the market. Derby Blades are great. Just pull the blade through your fingers twice before you put it in the razor. That will make the first shave with it smoother.
    You can buy a little box of 100 half Derby blades for a few Dollars. The Sedef is the closest thing to a SR, besides the weight. The Sedef is very light, hence it doesn't tear your face open if you make a mistake. Don't worry about all the junk you hear about how difficult a blade change is with the Sedef. Just do as the instruction says. For pushing the blade in or out, I use a key. The blade can remain in the shavette until it is dull, it won't rust in there as it does in the DOVO.

    The Parker is pretty heavy. It mows through the beard better but does mow into your skin just as easy. The weight resembles a real SR more.

    The DOVO, which I started out with, is very nice too, but the blade part is alittle short. It is fairly expensive. If you want one anyway, get one with the red insert for half a standard blade.

    It is possible to start off with a shavette. I have. Keep your electric though in case your face needs some rest. You will cut yourself the first weeks. Don't daydream while you're at it, but concentrate. Just act like barely scraping off the cream without pressure. The blade does the work. Get something to stop the bleeding and read here what prep is to do. By the way, if you master the shavette, a SR won't be a problem. A shavette is sharper than a SR and usually not as smooth.

    I'm into to shavettes for about 3 months now and believe to have made it. It takes time. When I need relief or am in a hurry, I use a Muehle Safety Razor with - guess - a Derby blade.

    Get pre shave oil. That makes things easier on the skin. Apply it to your face after washing. Then apply the lather.

    I guess thats enough to encourage you and get you started.

    Best wishes,
    OldSalt
    Last edited by OldSalt; 02-26-2014 at 06:32 AM.

  9. The Following 2 Users Say Thank You to OldSalt For This Useful Post:

    Phooey (02-27-2014), tinkersd (02-22-2017)

  10. #6
    Have Married My Coticule
    Join Date
    Dec 2013
    Posts
    318
    Thanked: 39

    Default

    Since Whipped dog will get you set up for under $50 with a proper straight razor I would bare this in mind.

    With this said, if you chose yo go with a shavette first-as I also did-bare in mind that they are not easy to use and very slight errors will cause extreme exfoliation/evisceration.
    Phrank likes this.

  11. #7
    barba crescit caput nescit Phrank's Avatar
    Join Date
    Jul 2013
    Location
    Toronto, Canada
    Posts
    9,660
    Thanked: 2691

    Default

    Have to agree with Cigar460 - I'd start with a DE if you've never used a real blade before. DE's (safety razors), would be a good place to start to learn how your face responds to a real blade, learn how your skin reacts as well, and for you to develop the ability to make lather and get a routine going.

    That way, you'll always have a DE available to you.

    I would also recommend a straight razor shave ready starter kit from Whipped Dog, it will get you started nicely and allow you decide if this is for you.

    Good luck!

  12. #8
    Senior Member blabbermouth Substance's Avatar
    Join Date
    Jun 2013
    Location
    Gladstone QLD AUSTRALIA
    Posts
    3,245
    Thanked: 804

    Default

    Based on feed back from my nephew who has used a shavette for a year & converted to the pure straight in the last 4 months after I gave him a few sizes & grinds to try out from my rotation.
    He opted for & prefered a 5/8" straight, half to full hollow as it has a similar feel to a shavette (but the full hollow has more feed back, like the dry toast sound LOL) although slightly heavier but fully maintainable.
    If you must go a Shavette try the Whal or Parker etc or any that takes the standard halve a DE blade & try the Feather or Astra blades as an option they work well
    but for under $100 you can get a shave ready blade, basic strop & brush to get you started if you wanted.
    Saved,
    to shave another day.

  13. #9
    Junior Member
    Join Date
    Feb 2014
    Posts
    3
    Thanked: 0

    Default

    So I've been reading all your feedbacks and appreciate them greatly. I would like your opinion whether I should go straight to shaving with a Shavette or start with a D/E (safety razor) first and then Shavette and then straight razor, because some of you have said to start with D/E first and some say to just go with Shavette.

  14. #10
    Kyle Redcane's Avatar
    Join Date
    Nov 2013
    Location
    San Diego
    Posts
    786
    Thanked: 153

    Default

    I started with a shavette style and still use one on occasion, but now I have a DE and 6 straights (started straights in October). I wish I would have just started with straights.

    Goods- another way to shave and angles don't matter as much.

    Bad- SUPER UNFORGIVING and it is harder on my face.

    Good luck in whatever route you take.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •