Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree7Likes

Thread: Ok...let's go over this one more time...

  1. #1
    Senior Member Whizbang's Avatar
    Join Date
    Sep 2015
    Location
    I'm thinking...
    Posts
    447
    Thanked: 79

    Default Ok...let's go over this one more time...

    I have two shavettes on order. Checking the mailbox doesn't make them arrive any sooner. Especially on Sunday.

    So...after all my reading and watching Youtube and reading shavette forum posts I think I can summarize how my first shave should work. Someone correct me if I am wrong....or feel free to add to my list.

    1. Good beard/facial prep is a must.
    2. Lather should be on the wet side....
    3. Blade should be a milder variety (e.g. Derby)...and run the first blade through a cork to remove any burrs...
    4. Play with the shavette in my hands for a while (i.e. get comfortable with the grip). Maybe shave without the blade to get an idea of how the razor feels in action.
    5. Start on the good side of my face and first day only do the cheek...finish the shave with a DE. Do this for a few days and then expand to other areas.
    6. Go slow. Short strokes at first.

    Additional tips: Dry your hands before picking up the razor. Make sure the mirror is not fogged. Wear a towel around your waist and something on your feet. Shave alone. Keep a styptic pencil handy.

    How does that sound?

  2. #2
    Senior Member blabbermouth Haroldg48's Avatar
    Join Date
    Jun 2013
    Location
    Clayton, NC USA
    Posts
    3,341
    Thanked: 866

    Default

    Sounds ok, except for the cork. I'm not sure that is necessary or desirable. I've never used a shavette, but have had one used on me in a barbershop, and they seem to need a slightly different technique because off the flexibility of the blade, come to a SR. My barber was really slow and did major stretching.

    Enjoy!
    Just call me Harold
    ---------------------------
    A bad day at the beach is better than a good day at work!

  3. #3
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    What shavettes did you order? Knowing that guys can give you better knowledge on their individual quarks.

    For the most part you plan sounds like a good one. I agree that the cork is not needed but I know some guys like that.

    When you go to shave for the first time start with the blade almost flat to the face and slowly move it to a steeper angle till it stars to cut the hair and glide across the skin.
    Haroldg48 likes this.

  4. #4
    Senior Member Whizbang's Avatar
    Join Date
    Sep 2015
    Location
    I'm thinking...
    Posts
    447
    Thanked: 79

    Default

    Quote Originally Posted by Castel33 View Post
    What shavettes did you order? Knowing that guys can give you better knowledge on their individual quarks.

    For the most part you plan sounds like a good one. I agree that the cork is not needed but I know some guys like that.

    When you go to shave for the first time start with the blade almost flat to the face and slowly move it to a steeper angle till it stars to cut the hair and glide across the skin.
    Good advice on the angle of the blade...I will keep that in mind. The two I ordered are the Parker SR1 and Bluebeards Revenge. Any tips on these are welcomed.

  5. #5
    Senior Member
    Join Date
    Aug 2015
    Location
    oswego, new york
    Posts
    277
    Thanked: 28

    Default

    sounds like your fine for your mission...leave out the cork. Let us know how it all comes out for you. I have a feeling you will be fine. There are fine vintage SR on the classifieds I was just looking. Just busting on you.

    Best of luck and hope the shavetts get there soon to you.

  6. #6
    Senior Member blabbermouth 1OldGI's Avatar
    Join Date
    Aug 2009
    Location
    New Port Richey, FL
    Posts
    3,819
    Thanked: 1185
    Blog Entries
    3

    Default

    Sounds like you may be overthinking the whole process a bit. If you're currently a DE shaver you have all the basics down. As far as the non-razor part of the routine, I'd just do whatever you normally do for a DE shave. Yeah, you'll need to learn to hold a drive a shavette (and probably a traditional straight after that) but don't let it freak you out too badly. Just pay attention to blade angle, placement and pressure (just like a DE) and here's one I learned the hard way: If for whatever reason, the blade binds or doesn't move the answer is NOT put some arse behind it (force it). Instead, pick the blade up re-set and gently glide the blade where you want it.

    It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.
    The older I get, the better I was

  7. #7
    Senior Member blabbermouth markbignosekelly's Avatar
    Join Date
    Dec 2012
    Location
    Egham, a little town just outside London.
    Posts
    3,725
    Thanked: 1074
    Blog Entries
    2

    Default

    Quote Originally Posted by 1OldGI View Post
    It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.
    Beautifully put!
    your analogy just made my morning!
    Haroldg48 likes this.

  8. #8
    Senior Member blabbermouth edhewitt's Avatar
    Join Date
    May 2013
    Location
    Perth Australia
    Posts
    7,741
    Thanked: 713
    Blog Entries
    1

    Default

    Sounds like you should be good. I wouldn't worry about the cork, I think that is more to do with making the edge a bit more mild.
    Bread and water can so easily become tea and toast

  9. #9
    Senior Member Whizbang's Avatar
    Join Date
    Sep 2015
    Location
    I'm thinking...
    Posts
    447
    Thanked: 79

    Default

    Quote Originally Posted by 1OldGI View Post
    Sounds like you may be overthinking the whole process a bit. If you're currently a DE shaver you have all the basics down. As far as the non-razor part of the routine, I'd just do whatever you normally do for a DE shave. Yeah, you'll need to learn to hold a drive a shavette (and probably a traditional straight after that) but don't let it freak you out too badly. Just pay attention to blade angle, placement and pressure (just like a DE) and here's one I learned the hard way: If for whatever reason, the blade binds or doesn't move the answer is NOT put some arse behind it (force it). Instead, pick the blade up re-set and gently glide the blade where you want it.

    It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.
    Great winter driving analogy. Yes, I am probably overthinking the whole process...but that's just my OCD kicking in...I am enjoying learning a new shaving process, more toys to buy etc..
    Haroldg48 likes this.

  10. #10
    Senior Member blabbermouth edhewitt's Avatar
    Join Date
    May 2013
    Location
    Perth Australia
    Posts
    7,741
    Thanked: 713
    Blog Entries
    1

    Default

    Quote Originally Posted by Whizbang View Post
    Great winter driving analogy. Yes, I am probably overthinking the whole process...but that's just my OCD kicking in...I am enjoying learning a new shaving process, more toys to buy etc..
    Sorry to sound like a frump but less toys are better until you develop proficiency with the 2 you have, in the case of a shavette one would be better. I say this as it reduces the variables, you can already change blades and don't have to strop etc.
    Whizbang likes this.
    Bread and water can so easily become tea and toast

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •